Construction of Community Sanatary Complex Near Udalamma Temple, Vemagiri Village of Kadiam Mandal. Est. Cost: 12.00 Lakhs

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per Technical Specification 304 MORTH - Ordinary soil - Manual Means - Depth upto 3 m without dewatering (5th Revision)

Sand Filling in basement including const and conveynace od all materials and all labour charges ncluding watering and ramming etc complete(BLD-CSTN-2.8)

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level: PCC (1:4:8) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mix

Drilling of 300 mm diameter Singel Under Reamed piles for a depth of 3 mt with RCC(1:1.5;3) using 20 mm size HBG Metal using re1quired quantity of steel per 1 cum of concrete including cost and conveyance of all materials and all labour charges etc complete but excluding cost of steel and fabrication charges of steel per 1 No.

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Columns

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Plinth Beam

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Plinth Roof

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Roof slab 125mm thick

Construction of Super structure with brick massonary in CM(1:6) using 2nd class bricks including cost and conveyance of all material and labour charges etc completed

Plastering with cement mortar (1:5), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 MORD 1st Revision

Impervous coat with Plastering in CM(1:3) prop 12mm thick including cost&coveyance of all materials lalbour charges,seign.charges etc.complete for wearing coat.

Painting to new Walls with 2 coats of Plastic emulsion paint of approved brand oveer primary coat of white cement and shade after throughly brushed the surface to remove all dirt and remains of loose poweder matrial, inculidng cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 or as directed by the Engineer-In-Charge

Cost and Supply of steel including labour charges for fabrication,cutting,bending, tying grill's,placing in position including cost of binding wire etc.complete

RCC door frame with size of 100*75 mm both face with outer size of 0.75*2 mts including all labour chargesRCC door frame with size of 100*75 mm both face with outer size of 0.75*2 mts including all labour charges

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 25 mmthick conforming to IS:2202

cost and supply of Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long MAT 00914

cost and supply of Aluinium Aldrop (IS:2681) 200 mm long MAT 00945

Stainless Steel Door Handles 100 mm Long BMT G-108

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556Part31981 with"P" or "S" trap: 580 mm x 440 mmx260mm MAT 01783

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556Part4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm Single C.P. Pillar cock

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,

Skirting with with Ceramic wall tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

110 mm dia Single Tee UPVC/SWR Pipe fittings MAT 01956

75 mm dia Single Tee UPVC/SWR Pipe fittings MAT 01954

S& F CPVC pipe 15.90mm ODPipe - SDR 13.5

S& F CPVC pipe 22.20 mm ODPipe - SDR 13.5

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice LAB00259

1000 ml Solvent Cement MAT 02036

Supply and Fixing of 25 mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete MAT-02676

a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make MAT01820

6A Switch 1 way modular switch MAT-02833

6A 3 pin Modular Socket MAT-02836

6A, flush type Neon Indicator. MAT-02810

16A or 20 A Switch 1 way modular switch MAT-02840

8 Modular Horizontal / Vertical Cover Frame.MAT-02871

7 W LED bulb MAT-03287

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade conforming IS: 694:2010 & IS:17048/2018(for HFFR/ZHFR variants). MAT-02755

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

0.6mt*0.3 mt RCC ventilators

Supplying and fixing of RCC well rings 900mm dia for leach fit including cost and conveyance of all materials and all labour charges

Supplying and fixing oof 1000mm dia RCC cover slabs

Construction of 20 KL OHSRs of 9.4 mtrs staging with M30 grade design mix in the habitations and locations selected by the department , as per drawings and as specified in Technical Specifications including earth work excavation in all types of soils in wet or dry conditions for foundations including cost and conveyance of all materials, cost and fabriation of steel, fixtures, labour charges and testing the reservoir for water tightness etc., complete for finished item of work as per the Standard Specifications and as per the provisions made in the current SOR 2020-21. The rate is inclusive of cost of all materials and labour charges and all taxes, duties and levies, etc., complete for finished item of work, but excluding GST and Seigniorage charges, including Overheads and Contractors Profit @13.615%. 1). All concrete members shall be designed with M30 grade design mix. 2) Rate is for OHSRs with RAFT FOUNDATION 3) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the Reservoir including roof. 4) Rate inclusive of 2 coats of weather proof emulsion painting for external surfaces, lettering as per Department direction, all required fixtures,CI D/F pipes, bends, DI D/F Gate Valves PN1.6 for outlet and scour etc., for pipe connections including cost of pipes, bends and valves as per departmental designs and drawings. 5) The above rates are applicable for basic wind speed of 150 KMPH . Fixtures include : a) RCC or Aluminium ladder inside reservoir of 0.60 m wide. b) Spiral staircase on the outside shall be provided c) Lightening arrestor of approved pattern, including conductor and earthling etc., d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manhole cover with frame of 0.60x0.60m as per IS specifications (light duty) - 2 Nos. f)Water level indicator of good quality with ebonite/copper float of approved pattern-1 No. g) Railing with Stainless Steel of grade 304 in two rows around OHSR fixed in RCC (1:2:4) of post of size 100x75x75mm with 1.5m intervals around the pheriphary on top of OHSR for a height of 1.20 Mtrs. i) D.I swan neck ventilators shall be provided in top dome and slab. j). Bed Blocks of 0.45m x 0.45m x 0.30m in CC M15 Mix below all the duck foot bends k) The rates are inclusive of CI verticals for all inlet, out let, overflow and scour connections( as per estimate diameters) and D.I valves. All valves near out let and for scour shall be D.I valves of heavy duty conforming to the specification of SoR

Drilling of 300 mm diameter Singel Under Reamed piles for a depth of 3 mt with RCC(1:1.5;3) using 20 mm size HBG Metal using re1quired quantity of steel per 1 cum of concrete including cost and conveyance of all materials and all labour charges etc complete but excluding cost of steel and fabrication charges of steel per 1 No.

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Plinth Beam

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Columns

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Roof Beam

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni for Roof slab 125mm thick

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per Technical Specification 304 MORTH - Ordinary soil - Manual Means - Depth upto 3 m without dewatering (5th Revision)

Sand Filling in basement including const and conveynace od all materials and all labour charges ncluding watering and ramming etc complete(BLD-CSTN-2.8)

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level: PCC (1:4:8) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mix

Construction of Super structure with brick massonary in CM(1:6) using 2nd class bricks including cost and conveyance of all material and labour charges etc completed

Plastering with cement mortar (1:5), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 MORD 1st Revision

Impervous coat with Plastering in CM(1:3) prop 12mm thick including cost&coveyance of all materials lalbour charges,seign.charges etc.complete for wearing coat.

Painting to new Walls with 2 coats of Plastic emulsion paint of approved brand oveer primary coat of white cement and shade after throughly brushed the surface to remove all dirt and remains of loose poweder matrial, inculidng cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 or as directed by the Engineer-In-Charge

Cost and Supply of steel including labour charges for fabrication,cutting,bending, tying grill's,placing in position including cost of binding wire etc.complete

Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 25 mmthick conforming to IS:2202

cost and supply of Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long MAT 00914

cost and supply of Aluinium Aldrop (IS:2681) 200 mm long MAT 00945

Stainless Steel Door Handles 100 mm Long BMT G-108

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556Part31981 with"P" or "S" trap: 580 mm x 440 mmx260mm MAT 01783

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556Part4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm Single C.P. Pillar cock

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,

Skirting with with Ceramic wall tiles of Size 300 mm x 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.110mm pVC 6kgf

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.75mm pVC 6kgf

110 mm dia Single Tee UPVC/SWR Pipe fittings MAT 01956

75 mm dia Single Tee UPVC/SWR Pipe fittings MAT 01954

S& F CPVC pipe 15.90mm ODPipe - SDR 13.5

S& F CPVC pipe 22.20 mm ODPipe - SDR 13.5

1000 ml Solvent Cement MAT 02036

Supply and Fixing of 25 mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete MAT-02676

a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make MAT01820

6A Switch 1 way modular switch MAT-02833

6A 3 pin Modular Socket MAT-02836

6A, flush type Neon Indicator. MAT-02810

16A or 20 A Switch 1 way modular switch MAT-02840

8 Modular Horizontal / Vertical Cover Frame.MAT-02871

7 W LED bulb MAT-03287

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Supply of………. ISI marked FRLS/ FRLS-H / HFFR / ZHFR PVC insulated flexible copper cables 1100V grade conforming IS: 694:2010 & IS:17048/2018(for HFFR/ZHFR variants). MAT-02755

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supplying and fixing of RCC well rings 900mm dia for leach fit including cost and conveyance of all materials and all labour charges