Grouting of 35 nos Tubular pole 33KV HT Poles and strengthening of 3.3KV ACSR conductor of check-post 3.3KV OH line under Urimari OCP.

Amount

Providing and making steel pole collar with cement concrete 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Erection of metallic pole of above 08.00 Mtr and upto 10.00 Mtr length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of stay set for 11KV overhead lines complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and 11KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 mm diameter and above including binding etc. as required( 0.9Km x 394 kg/km= 355Kg)

Dismantling of Overhead lines comprising of copper/aluminium overhead conductor, GI wire, cross arms, insulators etc. as required.(0.9Kg x 394Kg/Km = 355 Kg)

Supplying of channel iron 75mm x 40mm x 6 mm(7.14Kg/mtr) cross arm for two 11KV overhead line conductors complete with 50mm x 50mm x 6mm(angle iron bracket welded to the channel iron and complete with 50mm x 6mm MS flat iron clamps , bolts and nuts including drilling holes for insulator pins , bolts nuts and washers etc(as per drawing) and painting with primer and finish paint as required.

Supplying 50mm x 8 mm MS Flat iron pole top bracket cross arm for Single HT line complete.

Supplying of two lengths of channel iron 75mm x 40mm x 6 mm(7.14Kg/mtr)double pole cross arm for three wire 11KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50mm x 6mm M.S flats welded on one side to the channel iron and with bolts and nuts on other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts ,nuts and washers etc(as per drawing) and painting with primer and finish paint as required.

Supplying and erection of a set of cross bracing FRL same work for 11KV overhead line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height, complete with 50mm x 6mm M.S. flat iron clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of double pole 3 wire cross arm for 11/22/33 KV overhead lines as required

Supply and Erection of 11KV Pin Insulator Complete with large steel head G.I. Spindle,washers and nuts etc. as required.

Supply and Erection of 11KV Disc Insulator for 11KV overhead lines with galvanized insualtor fittings, ball and socket type and complete with galvanized strain clamps, bolts, washers and nuts etc. as required.

Painting of Pole through Aluminium Paint

Total impact of GST for the purpose of CTC

M/S OMPRAKASH MEHTA

HARIOM CONSTRUCTION