Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹71.1 L
EMD Value
₹71,087
Closing Date
10 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of Toilets at Western side, behind canopy and at Eastern side of Amrit Sarovar, Amnaur Pokhra, Saran, Bihar under MPLAD Scheme.
NBCC/SBG/PAT/MP-LADS/2023/74~EWc3783a6dee0c8f3c8bc727dd
NBCC/SBG/PAT/MP-LADS/2023/74
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹71,087
10 Jul 2023
26 Jun 2023
10 Jul 2023
26 Jun 2023
10 Jul 2023
SUMMARY OF BILL OF QUANTITY
SN. SUB-HEAD DSR AMOUNT NDSR AMOUNT TOTAL AMOUNT
SN. SUB-HEAD DSR AMOUNT NDSR AMOUNT TOTAL AMOUNT
CONSTRUCTION OF TOILET AT WESTERN
1 SIDE, BEHIND CANOPY AMRIT SAROVAR 3571989.73 3571989.73
CONSTRUCTION OF TOILET AT EASTERN
SIDE AMRIT SAROVAR AMNAUR POKHRA
Digitally signed by PRIYA
CONSTRUCTION OF TOILETS AT WESTERN SIDE, BEHIND CANOPY AND AT EASTERN SIDE OF AMRIT SAROVAR, AMNAUR POKHRA, SARAN,
1. CONSTRUCTION OF TOILET AT WESTERN SIDE, BEHIND CANOPY AMRIT SAROVAR AMNAUR POKHRA
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-incharge.
1.1 2.6.1 All kinds of soil cum 50 205.45 10272.50
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m and
lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including watering,ramming,
consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
4.1 4.1.5 sources : 6 graded stone aggregate 20 mm nominal size cum 15 6833.40 102501.00
derived from natural sources)
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
4.2 4.1.10 sources : 10 graded stone aggregate 40 mm nominal size cum 12 6050.65 72607.80
derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete,
5 5.1 excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
5.1 5.1.2 sources : 3 graded stone aggregate 20 mm nominal size de cum 20 8364.20 167284.00
rived from natural sources)
Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. above plinth level up to floor five level, excluding
cost of centering, shuttering, finishing and reinforcement :
Digitally signed by PRIYA
CONTRACTOR 2 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
6.1 5.2.2 sources : 3 graded stone aggregate 20 mm nominal size cum 6 10185.05 61110.30
derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up
to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases above plinth level up to floor five level, excluding the
cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5
coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm
nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting,bending,
placing in position and binding all complete upto plinth level.
8.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more kg 6000 89.65 537900.00
9 5.9 Centering and shuttering including strutting, propping etc. and removal of form for
9.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 100 307.95 30795.00
9.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 150 766.55 114982.50
9.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 150 608.35 91252.50
9.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 65 804.25 52276.25
9.5 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 20 657.75 13155.00
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in foundation and plinth in:
10.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 12 6658.25 79899.00
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
11.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 25 8288.35 207208.75
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.
12.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 60 1018.05 61083.00
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I)
decorative type, core of block board construction with frame of 1st class hard wood
and well matched teak 3 ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters.
Digitally signed by PRIYA
CONTRACTOR 3 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I)
non-decorative type, core of block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters:
30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Providing and fixing M.S. grills of required pattern in frames of windows etc. with
15 9.48 M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.
15.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 200 197.70 39540.00
16 9.7.7 Float glass panes
16.1 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm). sqm 10 1897.10 18971.00
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
17 9.96 coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating
18 9.97 not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
19 9.1 less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,joints mitred
and Plastic welded. The hinge side vertical of the frames reinforced by galvanized
M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless
steel hinges fixed to the frame complete as per manufacturer’s specification and
direction of Engineer-in-charge
20.1 9.117.1 Extruded section profile size 48x40 mm metre 50 232.55 11627.50
Digitally signed by PRIYA
CONTRACTOR 4 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
21 9.118 Providing and fixing to existing door frames.
24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.
The styles and rails mitred and joint at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of
size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The
lock rail made up of 'H' section, a uPVC hollow section of size
21.1 9.118.1 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the sqm 16 1790.65 28650.40
shutter styles by means of plastic/galvanised M.S. 'U' cleats.
The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness
of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting horizontally
6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and
direction of Engineer-in-charge. (For W.C. and bathroom door
Structural steel work riveted, bolted or welded in built up sections, trusses and
22 10.2 framed work, including cutting, hoisting, fixing in position and applying a priming kg 1000 111.95 111950.00
coat of approved steel primer all complete.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle
23 10.5 iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings
complete, including applying a priming coat of approved steel primer.
10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces sqm 3 4781.15 14343.45
Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured
from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock
jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm,
or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar
guards, lock strike-plate and shock absorbers as specified and applying a coat of
approved steel primer after pre-treatment of the surface as directed by Engineer-in-
24.1 10.14.1 Profile B
Digitally signed by PRIYA
CONTRACTOR 5 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
24.1.1 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb metre 5 444.50 2222.50
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with
grey cement slurry mixed with pigment to match the shade of the slab, including
rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622
of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement
slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching
pigment etc.,complete.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622
(thickness to be specified by the manufacturer ) of approved make in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-in-
28 11.37A Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar sqm 150 938.50 140775.00
1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm
including pointing in white cement mixed with pigment of matching shade
Providing corrugated G.S. sheet roofing including vertical / curved
surface fixed with polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers
29 12.1 filled with white lead, including a coat of approved steel primer and two coats of
approved paint on overlapping of sheets complete (up to any pitch in horizontal/
vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.
29.1 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² sqm 150 1320.35 198052.50
Digitally signed by PRIYA
CONTRACTOR 6 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
30 12.22 aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished each 6 266.60 1599.60
with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
31 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
32.1 12.42.1 Coupler
32.2 12.42.3 Single tee with door
32.3 12.42.6 Shoe (Plain)
33 13.1 12 mm cement plaster of mix :
34 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
35 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
36 13.16 6 mm cement plaster of mix :
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content
37 13.42 less than 50 gms/litre, of approved manufacturer, of required shade and colour
complete, as per manufacturer's specification.
37.1 13.42.1 Two or more coats on new work sqm 300 92.75 27825.00
Digitally signed by PRIYA
CONTRACTOR 7 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface :
38.1 13.43.1 Water thinnable cement primer sqm 300 64.45 19335.00
39 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm
39.1 13.46.1 over and including priming coat of exterior primer applied sqm 200 166.85 33370.00
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
40.1 13.61.1 Two or more coats on new work sqm 80 131.45 10516.00
Providing and fixing water closet squatting pan (Indian type W.C.
pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
41 17.1 cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including cutting and
making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
42 17.2 P.V.C. flushing cistern, including flush pipe, with manually controlled device
(handle lever), conforming to IS : 7231, with all fittings andf ixtures complete,
including cutting and making good the walls and floors wherever required :
42.1 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 2 5540.55 11081.10
Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
43 17.4 automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required :
Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
44 17.7 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:
Digitally signed by PRIYA
CONTRACTOR 8 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass
White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
45 17.16A 1 metre long with S.S. triangular plate to Eureopean type W.C. of each 2 299.35 598.70
quality and make as approved by Engineer - in - charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
46 18.8 at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
46.1 18.8.1 15 mm nominal dia Pipes metre 40 441.15 17646.00
46.2 18.8.2 20 mm nominal dia Pipes metre 60 513.75 30825.00
46.3 18.8.3 25 mm nominal dia Pipes metre 25 626.05 15651.25
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
47.1 18.12.3 25 mm dia nominal bore metre 20 417.95 8359.00
47.2 18.12.4 32 mm dia nominal bore metre 20 457.70 9154.00
47.3 18.12.5 40 mm dia nominal bore metre 30 558.35 16750.50
Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
48.1 18.13.1 25 to 40 mm nominal bore each 2 757.1 1514.20
49 18.15 Providing and fixing brass bib cock of approved quality :
50 18.16 Providing and fixing brass stop cock of approved quality :
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
Digitally signed by PRIYA
CONTRACTOR 9 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
52.1 18.19.2 32 mm nominal bore
52.2 18.19.3 40 mm nominal bore
53 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
Providing and fixing G.I. Union in G.I. pipe including cutting and
54 18.46 threading the pipe and making long screws etc. complete (New
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS : 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed
58 1.8 medium class PVC conduit, with piano type switch, phenolic laminated sheet,
suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc. as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVCinsulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable
for loop earthing as required.
Total A 3359343.30
ADD MULTIPLYING FACTOR OF 6.33% ON DSR RATES AS PER CIRCULAR
158/SE(TAS)/GST/2022/331 DTD 10.08.2022 on (B)
Digitally signed by PRIYA
CONTRACTOR 10 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Total B 3571989.73
2. CONSTRUCTION OF TOILET AT EASTERN SIDE AMRIT SAROVAR AMNAUR POKHRA
Earth work in excavation by mechanical means (Hydraulic excavator)/manual
means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on
plan) including getting out and disposal of excavated earth lead upto 50 m and lift
upto 1.5 m, as directed by Engineer-incharge.
1.1 2.6.1 All kinds of soil cum 70 205.45 14381.50
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to 50 m and
lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including watering,ramming,
consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural
4.1 4.1.5 sources : 6 graded stone aggregate 20 mm nominal size cum 12 6833.40 82000.80
derived from natural sources)
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural
4.2 4.1.10 sources : 10 graded stone aggregate 40 mm nominal size cum 18 6050.65 108911.70
derived from natural sources)
Providing and laying in position specified grade of reinforced cement concrete,
5 5.1 excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural
5.1 5.1.2 sources : 3 graded stone aggregate 20 mm nominal size de 24 8364.20 200740.80
rived from natural sources)
Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. above plinth level up to floor five level, excluding
cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural
6.1 5.2.2 sources : 3 graded stone aggregate 20 mm nominal size cum 9 10185.05 91665.45
derived from natural sources)
Digitally signed by PRIYA
CONTRACTOR 11 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Reinforced cement concrete work in beams, suspended floors, roofs having slope up
to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,
staircases and spiral stair cases above plinth level up to floor five level, excluding the
cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5
coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm
nominal size derived from natural sources).
Steel reinforcement for R.C.C. work including straightening, cutting,bending,
placing in position and binding all complete upto plinth level.
8.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more kg 7500 89.65 672375.00
9 5.9 Centering and shuttering including strutting, propping etc. and removal of form for
9.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 150 307.95 46192.50
9.2 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 150 766.55 114982.50
9.3 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 150 608.35 91252.50
9.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 80 804.25 64340.00
9.5 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 30 657.75 19732.50
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in foundation and plinth in:
10.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 10 6658.25 66582.50
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
11.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 30 8288.35 248650.50
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level.
12.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 100 1018.05 101805.00
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I)
decorative type, core of block board construction with frame of 1st class hard wood
and well matched teak 3 ply veneering with vertical grains or cross bands and face
veneers on both faces of shutters.
30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Digitally signed by PRIYA
CONTRACTOR 12 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I)
non-decorative type, core of block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters:
30 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
Providing and fixing M.S. grills of required pattern in frames of windows etc. with
15 9.48 M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.
15.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 250 197.70 49425.00
16 9.7.7 Float glass panes
16.1 9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm). sqm 10 1897.10 18971.00
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic
17 9.96 coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required
colour or shade, with nuts and screws etc. complete :
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating
18 9.97 not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
19 9.1 less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete :
Providing and fixing factory made uPVC door frame made of uPVC
extruded sections having an overall dimension as below (tolerance
±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door
frame to be Jointed with galvanized brackets and stainless steel screws,joints mitred
and Plastic welded. The hinge side vertical of the frames reinforced by galvanized
M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless
steel hinges fixed to the frame complete as per manufacturer’s specification and
direction of Engineer-in-charge
20.1 9.117.1 Extruded section profile size 48x40 mm metre 30 232.55 6976.50
21 9.118 Providing and fixing to existing door frames.
Digitally signed by PRIYA
CONTRACTOR 13 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
24 mm thick factory made PVC door shutters made of styles
and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides.
The styles and rails mitred and joint at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having
wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of
size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The
lock rail made up of 'H' section, a uPVC hollow section of size
21.1 9.118.1 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the sqm 18 1790.65 32231.70
shutter styles by means of plastic/galvanised M.S. 'U' cleats.
The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness
of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels
filled vertically and tie bar at two places by inserting horizontally
6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and
direction of Engineer-in-charge. (For W.C. and bathroom door
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle
22 10.5 iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings
complete, including applying a priming coat of approved steel primer.
22.1 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces sqm 3 4781.15 14343.45
Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured
from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock
jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm,
or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by
mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar
guards, lock strike-plate and shock absorbers as specified and applying a coat of
approved steel primer after pre-treatment of the surface as directed by Engineer-in-
23.1 10.14.1 Profile B
23.1.1 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb metre 15 444.50 6667.50
Digitally signed by PRIYA
CONTRACTOR 14 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with
grey cement slurry mixed with pigment to match the shade of the slab, including
rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)
and jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622
of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on
20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement
slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching
pigment etc.,complete.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622
(thickness to be specified by the manufacturer ) of approved make in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer-in-
27 11.37A Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar sqm 100 938.50 93850.00
1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm
including pointing in white cement mixed with pigment of matching shade
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
28 12.22 aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished each 10 266.60 2666.00
with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,
rounding the edges and making and finishing the outlet complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
29 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Digitally signed by PRIYA
CONTRACTOR 15 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories
for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for
thermal expansion.
30.1 12.42.1 Coupler
30.2 12.42.3 Single tee with door
30.3 12.42.6 Shoe (Plain)
31 13.1 12 mm cement plaster of mix :
32 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
33 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
34 13.16 6 mm cement plaster of mix :
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content
35 13.42 less than 50 gms/litre, of approved manufacturer, of required shade and colour
complete, as per manufacturer's specification.
35.1 13.42.1 Two or more coats on new work sqm 250 92.75 23187.50
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface :
36.1 13.43.1 Water thinnable cement primer sqm 250 64.45 16112.50
37 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm
37.1 13.46.1 over and including priming coat of exterior primer applied sqm 200 166.85 33370.00
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
38.1 13.61.1 Two or more coats on new work sqm 100 131.45 13145.00
Digitally signed by PRIYA
CONTRACTOR 16 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Providing and fixing water closet squatting pan (Indian type W.C.
pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
39 17.1 cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including cutting and
making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
40 17.2 P.V.C. flushing cistern, including flush pipe, with manually controlled device
(handle lever), conforming to IS : 7231, with all fittings andf ixtures complete,
including cutting and making good the walls and floors wherever required :
40.1 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 2 5540.55 11081.10
Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with
41 17.4 automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required :
Range of two urinal basins with 5 litre white P.V.C. automatic
flushing cistern
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
42 17.7 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass
White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
43 17.16A 1 metre long with S.S. triangular plate to Eureopean type W.C. of each 2 299.35 598.70
quality and make as approved by Engineer - in - charge.
Digitally signed by PRIYA
CONTRACTOR 17 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
44 18.8 at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
44.1 18.8.1 15 mm nominal dia Pipes metre 40 441.15 17646.00
44.2 18.8.2 20 mm nominal dia Pipes metre 40 513.75 20550.00
44.3 18.8.3 25 mm nominal dia Pipes metre 25 626.05 15651.25
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
45.1 18.12.3 25 mm dia nominal bore metre 15 417.95 6269.25
45.2 18.12.4 32 mm dia nominal bore metre 40 457.70 18308.00
45.3 18.12.5 40 mm dia nominal bore metre 20 558.35 11167.00
Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
47 18.15 Providing and fixing brass bib cock of approved quality :
48 18.16 Providing and fixing brass stop cock of approved quality :
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
50.1 18.19.2 32 mm nominal bore
50.2 18.19.3 40 mm nominal bore
51 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
Digitally signed by PRIYA
CONTRACTOR 18 OF 19 Date: 2023.06.26 NBCC
SN. Item No. Description Unit Qty. DSR Rate DSR Amount
Providing and fixing G.I. Union in G.I. pipe including cutting and
52 18.46 threading the pipe and making long screws etc. complete (New
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS : 12701 marked, with cover and suitable locking rrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable in surface / recessed
medium class PVC conduit, with piano type switch, phenolic aminated sheet,
suitable size M.S. box and earthing the point with 1.5 q.mm. FRLS PVC insulated
copper conductor single core cable etc. as
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable
for loop earthing as required.
Total Rs. C 3326113.75
ADD MULTIPLYING FACTOR OF 6.33% ON DSR RATES AS PER CIRCULAR
158/SE(TAS)/GST/2022/331 DTD 10.08.2022 on (C)
Total Rs. D 3536656.75
TOTAL (B+D) 7108646.48
Digitally signed by PRIYA
CONTRACTOR 19 OF 19 Date: 2023.06.26 NBCC
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
1 NIT.pdf
Tender Document
2 SCC.pdf
Tender Document
4 GCC PMC 2022 WITH amendment 1 to 4.pdf
Tender Document
5 LIST OF MAKE.pdf
Tender Document
6 Physical Milestone.pdf
Tender Document
7 ANNEXURE A-SHORTLISTING OF AGENCY.pdf
Tender Document
8 TOILET DRAWINGS WEST SIDE.pdf
Tender Document
3 BOQ.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .