Mooppanpara Aarattuvayal Chirakkal Chira road Interlocking

Amount

Road Interlocking

3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

4.9:Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

OD171186/2024-2025:Providing and laying factory made chamfereed edge cement concrete paver blocks(80mm thick, M-30) in footpath, parks lawns, drive ways or light traffic parking, etc. of required strength, thickness, size, shape made by table vibratory method using PU mould, laid in required colour , pattern over 50mm thick compacted bed of 6mm broken stone aggregate, compacting and proper embedding laying of interlocking paver blocks into the broken stone bedding layer throgh the vibratory, compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Completing all as per the direction of engineer in charge. 80mm thiock CC paver block of M-30 grade with approved colour design and pattern. (16.91.2 modified by replacing sand bed 60mm stone aggregate bed. Data for sand bed surface

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

12.5.3:Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204<br> For height upto 5 m <br> III. R.C.C grade M 20

12.7:Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

OD172108/2024-2025:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD170559/2024-2025:Supplying and fitting name boards of size 75 x45 cm made with GI plain sheets 1.25 mm thick ( class IiI) fitted with 35x35x4 mm MS angle 2 nos horizontally and 3 no.s vertically to make a frame for strengthening the GI pl I've vertically 90 cm above ground level and fixing in cement concrete 1:2:4 ,30 x30 x30 cm including cost and conveyance of all materials all labour charges ,fabricating etc complete

OD171362/2024-2025:Lettering with Black Japan paint of approved brand and manufacture

ABDULSATHAR C P (BID ID -2005577)

Bidder Name

K MAHENDRAN

ABDULSATHAR C P