SUPPLY TRANSPORTATION AND COMMISSIONING OF SOLOR STREET LIGHTS TO SRIVVVSSDEVASTHANAM ANNAVARAM FOR APERIOF ONE YEAR 2ND CAL

Supply and laying of one number Outer dia 180 mm and Inner dia 152 mm double walled corrugated (DWC) HDPE pipe of following sizes having corrugation on the outer wall and plain surface inner wall confirming to IS : 14930 Part - I and II complete with necessary HDPE fittings for protection of 1.1 KV grade U.G cable directly in ground at a depth of 60Cms including excavation and refilling the trench as required.

Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) .Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Arrt

Labour charges for run of 300Sqm U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) with No.10 SWG G.I wire for eath connections for the cables.

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.Makes : Dowels/Comet/SMI

Supply and fixing of crimping type Aluminium lugs confirming to I.S specifications for cable of 300 Sq.mm including nuts and bolts with connections.Make :Dowels/Jainson/Comet

Supply and fixing of crimping type Aluminium lugs confirming to I.S specifications for cable of 150 Sq.mm including nuts and bolts with connections.Make :Dowels/Jainson/Comet

Supply Installation Testing and commissioning of free-standing floor mounted dust and vermin proof compartmentalized cubical panel made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). and labour charges etc with the following accessories 1no 400A 4 pole MCCB Schneidor/L&T make, 2 no 250A MCCB 4 pole with 400A Busbar chamber with Indicator lamps set 1 no,CT coils 3 nos, Digital Volt meter 1 no,Digital Ammeter 1 no, Selector switches 2 nos with necessary Lugs 4 pole connectors , and 40 x 40 x 6 mm angle iron support and necessary including connections and all Labour charges etc complete

Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Cutting road surface including stacking of excavated materials for pipe line trench work Cutting open C.C. road surface with concrete saw cutter and removal with Breaker

PCC M15 nominal mix using with nominal reinforcement

T.P Less @15.93%

Supply, installation and commissioning of 36 W(2 Nos X 18W LED based Solar Street Lighting System with the following components including installation and transportation charges on Turnkey basis i) 2 Nos X 12V 100Wp SPV Module, Module Make: Renew/ Renewsys/ Waaree or any other MNRE (Ministry of New and Renewable Energy) approved companies.ii) 2 Nos X 18W LED based Luminaire Make: Philips/ Bajaj/ Crompton or any other MNRE (Ministry of New and Renewable Energy) approved companies. iii) 2 Nos X 12.8 V, 30 Ah Lithium Ferro Phosphate (LiFePO4) Battery bank, Make: Pastiche/ Waaree/ Renon or any other MNRE (Ministry of New and Renewable Energy) approved companies.iv) 3 inch dia 6 mtrs length and 3 mm think of GI Octogonal Make: Bajaj / Valmont/Laasma/Transrail /Utkarsh/ Skipper /Consoul /Surya /Vakrangee/Lysaght Pole /Hakke or any other MNRE (Ministry of New and Renewable Energy) approved companies. v) Civil Foundation vi) other Electrical and Electronic items Autonomy: Minimum 03 days of 36 Operating hours per permissible discharge.Warranty i) The Street Lighting System (including the battery) Will be warranted for a period of five years from the date of installation.ii) The PV Modules(s) will be warranted for a minimum period of 25 years from the date of installation.

Supply, installation and commissioning of 60 W LED based Solar Street Lighting System with the following components including installation and transportation charges on Turnkey basis: i) 2 Nos X 12V 100Wp SPV Module, Module Make: Renew/ Renewsys/ Waaree or any other MNRE (Ministry of New and Renewable Energy) approved companies.ii) 60W LED based Luminaire Make: Philips/ Bajaj/ Crompton or any other MNRE (Ministry of New and Renewable Energy) approved companies. iii) 2 Nos X 12.8 V, 60 Ah Lithium Ferro Phosphate (LiFePO4) Battery bank, Make Pastiche/ Waaree/ Renon or any other MNRE (Ministry of New and Renewable Energy) approved companies. v) 9 mtrs length and 3 mm think of GI octagonal pole, Octogonal Make: Bajaj / Valmont/Laasma/Transrail /Utkarsh/ Skipper /Consoul /Surya /Vakrangee/Lysaght Pole /Hakke or any other MNRE (Ministry of New and Renewable Energy) approved companies. v) Civil Foundation vi) other Electrical and Electronic items Autonomy: Minimum 03 days of 36 Operating hours per permissible discharge.Warranty i) The Street Lighting System (including the battery) Will be warranted for a period of five years from the date of installation.ii) The PV Modules(s) will be warranted for a minimum period of 25 years from the date of installation.