15th fc 2024-25-24 1st installment tied grant

Engaging Dewatering pump 5 HP (disel) for Bailing out water from the pipe line trenches with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper. But excluding NAC & GST

Cutting of existing C.C.road surface for laying pipe lines incl.clearing the site etc.,complete as per the directions of departmental authorities. But excluding NAC & GST

Carting of waste material with a initial lead up to 3.00 km including loading, unloading charges etc,. Complete. P41/SSR2024-25 (PH). But excluding NAC & GST

Earthwork in excavation by manually in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as per specification drawings and as directed by the departmental officer including all incidental and operational charges etc., complete for the pipe line trench But excluding NAC & GST

Collection and Supply of Stone Crusher Dust (Finer than 3mm HBG m/c) including cost and conveyance at site of work and labour charges for spreading, watering and ramming etc., complete. But excluding Seigniorage charges, NAC & GST

Supply and delivery of 200mm dia D.I.K-7 Socket and spigot centrigually cast (spun) Ductile Iron pressure pipes of K-7 Class confirming to specification No.IS 8329/2000 of standard lengths suitable for push-on joint (Rubber gasket D jointing) with cement lining inside the pipe, out side Zinc Coating including cost of Pipe. The rate including transportation and conveyance to work spot and stacking at site etc., complete as per S.S and as directed by the departmental authorities.. But excluding NAC & GST

Lowering of 200 mm dia D.I. socket and spigot Pipes and fittings carefully in to the trench and laying them true to alignment and gradient including all labour charges, sundries as per BIS No. 3114/85 etc., complete as per S.S and as directed by the departmental authorities.. But excluding NAC & GST

Jointing of 200mm dia D.I. Pipes & fittings with Rubber Gasket including all sundries filling with water with a water lead up to 500m and testing to required pressure etc., complete as per BISNo.3114/85 and as directed by the departmental authorities.. But excluding NAC & GST

Supply and delivery of D.I. fittings (Specials) confirming to I.S.No.9523/2000 having dimensions as per table with Zinc coated externally and inside Cement Mortar lining (With finishing as per Class 13/IS 9523/2000) including cost of fittings, transportation, stacking carefully at site as directed by the departmental authorities. But excluding NAC & GST

Manufacture as per BIS: 12820/89 with S.B.R. Quality 200mm dia Rubber confirming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes any where in A.P.F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking. But excluding NAC & GST

Supply, delivery, lowering and keeping in position of DI D/F Gate Valve Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538 conveyance to work spot and stacking care fully at site etc. complete as per S.S - For Sluice valve of 200mm dia - PN1.6. But excluding NAC & GST

Supply, delivery, lowering and keeping in position of DI D/F Gate Valve Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538 conveyance to work spot and stacking care fully at site etc. complete as per S.S - For Sluice valve of 150mm dia - PN1.6. But excluding NAC & GST

Labour charges for lowering and keeping and fixing in position of 200 mm dia DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. - 150 mm dia. But excluding NAC & GST

Labour charges for lowering and keeping and fixing in position of 150 mm dia DI Sluice valves(with cap/with hand wheel), reflux valves and scour valves. - 150 mm dia. But excluding NAC & GST

Supply and delivery of M.S. Nuts , Bolts & Double washers for flanged joints including cost & conveyance etc., complete. But excluding NAC & GST

Supply and delivery of 6mm th Rubber Packing for flanged joints etc., complete. But excluding NAC & GST

Inter connection charges for Providing Inter connection from Exsisting pipe line to Newly Layed Pipe line including earth work, labour charges, etc., complete excluding specials as per local rate