Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical CHEETHICODE P O KANJIRAMATTOM VIA ERNAKULAM 682315 | ERNAKULAM | KERALA | 682315 | - | Rejected-Technical Disqualified |
Tender Value
₹60.0 L
EMD Value
₹50,000
Closing Date
20 Oct 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Managing Director KPHCC
KERALA POLICE HOUSING AND CONSTRUCTION CORPORATION LTD CHANDRASEKHARAN NAIR STADIUM, PALAYAM, THIRUVANANTHAPURAM - 695033
Integrated Construction of District Training Centre (Phase-II), Logistic and Infrastructure and Disabled Friendly Toilet at DPO Irinjalakkuda Thrissur (Re)
2022_KPHCC_515949_1
NIT No.96/KPHCC/2022-23
Open Tender
Civil Works - Buildings
Item Rate
180 days
Irinjalakkuda Thrissur
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,950
₹50,000
9 Nov 2022
13 Oct 2022
22 Oct 2022
13 Oct 2022
20 Oct 2022
13 Oct 2022
13 Oct 2022 - 20 Oct 2022
Amount
Civil Works
od172055/2022_2023 : Providing Ceramic Roof Tile on top of Roof including necessary fittings etc all complete as per instructions from engineer in Charge
od177913/2022_2023 : Providing and fixing Thomson Multi wood board with lamination or equivalent make paneling 12 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.
od177920/2022_2023 : Providing and applying texture paint over the plastered wall surface to prepare the surface decorative and aesthetically good etc complete as per instructions from Engineer in Charge
od177924/2022_2023 : Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing top & bottom fixing arrangement and making necessary holes etc. all complete as per direction of Engineer-in-charge.
21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
od177925/2022_2023 : Providing and fixing glass door locks with a pair of handle.
od178333/2022_2023 : Supply and fixing square type back wall show case using Marine Plywood (710) with lamination and using LED strips with Dotted CNC design of Logo as instructed by the Engineer in Charge, With background Lighting and spotted lights etc all complete as per instructions from Engineer in Charge
od177937/2022_2023 : Designing, Fabricating, testing, installing and fixing in position Curtain Wall with Aluminum Composite Panel Cladding, etc complete as per the direction from the Engineer in Charge.
od177919/2022_2023 : Fabricating and fixing Pergola Partition work with Prelaminated Multiwood Planter Box. Pergolas are made up of 12mm to 16mm thick laminated marine plywood (710) for beams and columns etc., all complete as per direction from the Engineer in Charge.
12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
od178315/2022_2023 : Providing and laying 60mm thick factory made Designed cement concrete interlocking paver block of 45x22.5 cm or nearest size made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
od177935/2022_2023 : Providing and Fixing Prelaminated Marine Plywood (710) Ceiling of thickness 12mm or more including necessary fittings etc., all complete as per instruction from Engineer in Charge
50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
od178316/2022_2023 : Providing & fixing Poly carbonate Clear Plain sheet 2 mm or more thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
12.56 : Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS- 12432 PT. III (density of foam being 40-45 kg/cum, ) over a coat of polyurethane primer applied @ 6-8 sqm per litre. laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 ( 1 cement : 2 coarse sand: 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in- Charge.
od178332/2022_2023 : Supply & fixing 150mm fibre rain gutters including labour, material charges etc all complete as per instructions from engineer in charge
50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm
50.18.7.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall
50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
od177936/2022_2023 : Engaging carpenters for repairing the doors, windows and ventilators including repairing the fittings etc complete.
od178334/2022_2023 : Engaging Plumber for water supply & Sanitary works (MR)
od178335/2022_2023 : Supply and fixing 3 seater cushioned full covered sofa with Jute Finish as per instructions from Engineer in Charge
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
od178336/2022_2023 : Providing and fixing blind curtains to the opening including all fittings and labour charges etc. complete.
$Electrical Works
od172875/2022_2023 : 25 KVA Online Double Conversion IGBT Pure Sine Wave UPS with Isolation Transformer (3 Phase Input and Single phase out , 360VDC) and 30 Nos 80 AH Tubular Batteries for 1 Hour backup
od172876/2022_2023 : 20 KVA Online Double Conversion IGBT Pure Sine Wave UPS with Isolation Transformer (3 Phase Input and Single phase out , 240VDC) and 20 Nos 100 AH Tubular Batteries for 1 Hour backup
od172877/2022_2023 : Supply of 20W LED tube light fitting have 2000lumen with duly wired up for use on<br>230 V AC. The fittings shall be directly on ceiling/ wall, including all accessories<br>etc. as required. Make -Philips or equivalent.
od172878/2022_2023 : Supply installation testing and commissioning of 100W LED Top light with<br>complete set (group-A) Govt approved and reputed brands on 25 mm or nearest<br>suitable size B class GI pipe 1.5 M long cut and weld,bend to shape fixed on wall<br>using flat iron clamps fabricated frpm 25x3 mm MS flat giving connection with<br>required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade<br>round 3 core copper conductor conforming to relavant ISS painting the GI pipe<br>and clamps with all necessary items making good the surface as required
od172880/2022_2023 : Supply and fixing 6W mirror light make philips , crompton, bajaj, or equivalant reputed brand and giving connection etc.
od172882/2022_2023 : Supply installation testing and commissioning of 40W LED pressure die cast aluminium housing LED street light luminaires with IP66 Protection ( Make PHILIPS/ CROMPTON/ Govt approved reputed brand) on 40 mm or nearest suitable size B class GI pipe1.0M long cut and weld,bend to shape fixed on wall using flat iron clamps fabricated frpm 25x3 mm MS flat giving connection with required length of 24/.20mm PVC insulated and PVC sheathed 650 /1100V grade round 3 core copper conductor conforming to relavant ISS painting the GI pipe and clamps with all necessary items making good the surface as required.
od172885/2022_2023 : Supply and fixing outdoor LED light fittings like bulkhead model make philips/ govt approved reputed brand and giving connections etc
od173977/2022_2023 : Supply and Fixing Recess type ceiling light 20 W LED panel light fitting make Luker/Bajaj/Crompton/Philips or equivalent govt approved brand including connection etc as complete
od173978/2022_2023 : Supply and Fixing Recess type ceiling light 15 W LED panel light fitting make Luker/Bajaj/Crompton/Philips or equivalent govt approved brand including connection etc as complete
od174017/2022_2023 : Supplying and fixing LED Hanging Tube Light 24W with hanging fixture Ceiling tube Light, 4-Feet (Cool White, 24 Watts, Linear) including all connection
od172888/2022_2023 : Supply and Fixing Recess type ceiling light 24 W LED panel light fitting with adaptor make Luker/Bajaj/Crompton/Philips or equivalant govt approved brand including connection etc as complete
od172898/2022_2023 : Supplying and providing 86" diagonal size interactive 4K LED panel screen fix it properly using brackets and giving connections as required
od172899/2022_2023 : 250 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C
od172889/2022_2023 : Supply and fixing Gate Lamp including led lamp and giving connection as required.
od172890/2022_2023 : Supply,Installation testing and commissioning of 1TON 3star rated inverter Air conditioner of brand LG/VOLTAS/BLUESTAR With voltage Stabilizer including connection etc as required
od172892/2022_2023 : Supply, Installation, Testing and commissioning of 3star and above rated 1.5TR Split Inverter AC of approved make Voltas/LG/Bluestar/Panasonic/Samsung with stabilizer and accessories complete as required
od172893/2022_2023 : Supply, Installation, Testing and commissioning of 3star and above rated 2TR Split Inverter AC of approved make Voltas/LG/Bluestar/Panasonic/Samsung with stabilizer and accessories complete as required
Bidder Name
PAUL VAZHAKALA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .