Construction of 3 Nos. of INS, 6 Nos. of SI and 61 Nos. of PC/HC quarters with development works at THUVAKUDI in Trichy District

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0001) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

EL0380.b) Metering Panel for 8 services (6 Flat + 1 common & 1 spare) 6 in 1

F0013) Supply and filling in foundation and basement with gravel (including Tax collected by Govt. Per Cum)

b) 2 to 3 mt

F0043) Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials

F0018) Supplying and filling the low lying area with conveyed gravel (including Tax collected by Govt. Per cum)

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture

EL0380.c) Metering Panel for 7 services (5 Flat + 1 common & 1 spare) 5 in 1

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

FL0115) Supplying and laying of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges and Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block

d) In Third Floor

C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade a) In Foundation and Basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

FL0115) Supplying and laying of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges and Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block

e) In Fourth Floor

b) Augering 30cm dia

CS0039) Supplying and Fixing of fibre mixed precast slab of 50mm thick of all required shapes made in C.C 1:3:6

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

d) In Third Floor

B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement

B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Ground Floor

b) In First Floor

c) In Second Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

d) In Third Floor

B0054) Brick Partition wall in Cement Mortor 1:4 110mm thick for super structure using fly ash bricks of size (23x11x7cm) with Admixture a) In Foundation and basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

FL0115) Supplying and laying of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges and Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block

e) In Fourth Floor

B0051) Brick partition wall in Cement Mortor 1:4 50mm thick using kiln burnt country bricks of size 8¾”x4¼”x2” (22x11x5cm) with admixture a) In Ground Floor

B0062) Brick partition walls in cement mortar 1:4 70mm thick using fly ash bricks of size 23x11x7cm with admixture a) In Ground Floor

b) In First Floor

c) In Second Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

d) In Third Floor

g) In Fifth Floor

FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture

FL0110) Supplying and laying of Ceramic tiles (anti skid) over Cement mortar 1:3, 20mm thick with Admixture

b) 23cm (9") Aluminium Dye casting letters

FL0117) Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works with Admixture

FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

f) For Curved Surface

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

FL0003) Supplying and fixing of 20mm thick bituminous expansion joint filler pad

PL0015) Plastering for border in CM 1:5, 12mm tk a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0032) Supplying and applying of wall putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC

PA0027) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JD0027) Supplying and fixing of Best Indian T.W. single leaf door shutters using 9mm thick phenol bonded BWR grade plywood Suitable door of size a) 900mm x 2100mm

PA0044.a) Painting the ceiling with one coat of approved best ready mixed Plastic emulsion paint including primer

JD0050) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 900 x 2100 mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0013) Supplying Cuddappah slab of 20mm thick and laying, finishing with two sides for cupboard, ward-robes shelves and other similar works a) In Ground Floor

b) In First Floor

c) In Second Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

JD0004) Supplying and fixing of Single leaf Teak wood Panelled door shutters with brass fittings Suitable for Door of size a) 1000 x 2100 mm

b) In First Floor

c) In Second Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

FL0119) Supplying and laying of Granite tile flooring (super fine polished with machine cut edges of size 2’ x 1’, 10mm thick (Jet Black) a) In Ground Floor

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

SA0073) Supply & fixing of CI Steps (not less then 5 Kg each)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0052) Supply and delivery of clear water vertical wet type 3 phase 3 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell

MS0053) Supplying and fixing of C.I man hole cover (Heavy duty) of approved quality and brand of size 0.60mx0.60m (50 Kg)

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0006.I) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D-1785 fully concealed in walls c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0220) Supplying and fixing of Precast kerb stone of 450x300x150mm made in CC 1:3:6 using 20mm size HBSJ

WS0238) Drilling of 150mm vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting and inserting the casing pipe in the drilling hole etc., a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth below Ground level

c) From 181m upto 210m depth ending from Ground level

d) From 211m upto 240m depth ending from Ground level

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

F0015) Supplying and filling of Stone dust in Foundation and Basement

C0035) Plain cement concrete 1:3:6 for foundation using 20mm gauge hard broken stone jelly

WS0004.h) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 200 litres

SA0122) Supplying, laying and jointing the following dia of UPVC Pipes below Ground Level a) 32mm dia UPVC pipe

b) 50mm dia UPVC pipe

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SA0045) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum water seal of 50mm

SA0039) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.

SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

SA0113) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank

SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

b) 160 mm dia UPVC Non Pressure pipe

SA0053) Supplying and fixing of following dia PVC Equal tee a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Bend

b) 160mm dia PVC Equal Tee

SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark

SA0186) Supplying and fixing of CP Angle Valve

WS0126) Supplying and fixing of C.P. shower arm with over head shower rose of best approved quality with ISI mark

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements a) 600mm x 600mm

SA0009) Supplying and fixing of CP Shower valve with Wall Flange

MS0002) Supplying and fixing of 20mm dia Aluminium Hanger Rod to the required length

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type wall socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0241) Supplying and fixing best country wood meter cupboard

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0084) Supplying and fixing of 300 mm dia sweep AC exhaust fan

EL0070) Supplying and fixing of 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0072) Supplying and fixing of 12 Watts LED Bulb for Bulk head fittings

EL0163) Supply and fixing of 32 Amps triple pole main switch with fuse and neutral link

b) 750mm x 750mm

EL0169) Supply and fixing of 32 Amps Double pole main switch with fuse and neutral link

EL0190) Supply and Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0252) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug inflush with wall with earth connection (For AC Plug)

EL0242.a) Supply and fixng of TNEB meter board suitable for 3phase 100A service connection

EL0235) Supplying and fixing of 1 No of 450x375x20mm thick TW plank varnished with 3 Nos of 32 amps 500 volts grade porcelin fuse unit

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

NL0001) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

EL0341) Labour charges for fixing of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level

SA0111) Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick

GR0053) Supplying and fixing in position of colour Galvalume sheet of 0.47mm thick inclusive of overlap length

GR0059) Supplying, fabrication and fixing in position of mild steel angle truss including cost of materials and labour charges

WS0207.a) Supply and fixing of 200mm dia PVC end cap for borewell top cover

WS0010) Supplying and fixing of 20mm dia CPVC pipe

EL0296) Supply and fixing of 65 mm dia (2½") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate

WS0222) Supply and delivery of clear water vertical wet type 3 phase 5 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell

WS0264) Supply and delivery of 3 HP - Openwell Submersible pumpset with ISI mark suitable for 150mm dia borewell Duty - 75m x 60 lpm

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable

WS0246.a) Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

WS0016) Supply and laying of following dia G.I pipes Below ground level a) 80mm dia GI Pipe

WS0015) Supply and laying of following dia G.I pipes Above ground level a) 20mm dia GI Pipe

b) 50mm dia GI Pipe

c) 80mm dia GI Pipe

EL0611) Supplying, laying and fixing of 25mm Dia Rigid Pipe of best approved quality in walls /Below GL

WS0243) Supplying laying and fixing of following dia UPVC Column pipe for borewell b) 40mm dia UPVC Column Pipe

SA0192) Supplying and fixing of following dia UPVC / PVC specials a) 50mm x 40mm dia UPVC Reducer

b) 90mm x 20 mm dia saddle piece

c) 50mm dia UPVC Elbow

d) 50mm dia UPVC Tee

e) 50mm dia UPVC Coupler

f) 50mm x 40mm dia UPVC Reducer

WS0018) Supply and fixing of following dia GI/GM Specials of best approved quality, with ISI mark a) 50mm dia GI Union

d) 20mm dia GI Bend

WS0148) Supply and delivery of following dia of PVC casing pipes a) 200mm dia PVC Pipe (Casing Medium Depth)

c) 150mm dia PVC Pipe (Casing Shallow Depth)

NL0007.a) Supplying and fixing of plastic name board of required size with Stikness cut in computer to the depth cost & fixing charges

NL0005) Supplying and fixing in position of Aluminium die casting TNPHC Emblem a) 60 cm TNPHCL Emblem (24")

FL0136.a) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet

WS0235) Supply and delivery of required dia nylon rope

WS0228) Supplying and fixing of 5 HP three phase panel board D.O

EL0290.a) Supplying and fixing of MS angle of size 50x50x5mm MS angle to hold LTUG cable in OH portion

b) 3.5 core 70 Sqmm PVC aluminium armoured LTUG cable

oured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 4 core of 10 Sqmm PVC Armoured ALTUG cable end termination

b) 2 core of 10 Sqmm PVC Armoured ALTUG cable end termination

c) 3.5 core of 70 Sqmm PVC Armoured ALTUG cable end termination

WS0004.a) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres

WS0262) Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method.

EL0380.a) Metering Panel for 10 services (8 Flat + 1 common & 1 spare) 8 in 1

NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering a) 30cm (12") Aluminium Dye casting letters

EL0529) Supplying and fixing of spot light (Master LED 3W-12W) including labour charges for fixing of light

EL0557.a) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA