Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹17.4 L+₹17,567 (1.02%)Rejected-AOC | L2 | Rejected-AOC Reject | |
| 3 | L3₹17.9 L+₹66,335 (3.85%)Rejected-AOC 10 ABHAY GARH SCHEME CENTRAL SCHOOL AIR FORCE JODHPUR 342001 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-AOC Reject | |
| 4 | L4₹18.0 L+₹75,408 (4.37%)Rejected-AOC | L4 | Rejected-AOC Reject |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG P115 AT ZONE A AHMEDABAD
2022_MES_555954_1
8291/E8
Open Tender
Civil Works
Works
210 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹38,000
Yes
1 Dec 2022
4 Oct 2022
26 Oct 2022
4 Oct 2022
24 Oct 2022
10 Oct 2022
4 Oct 2022 - 10 Oct 2022
Amount
Demolition of brick work built in cement mortar of any description complete.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortarcomplete.
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where complete.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, RCC tank, landing, chajjas and similar suspended work complete.
Dismantling of wrought iron work or mild steel work of any description not otherwise provided complete
Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete.
M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and necessary form work required complete.
M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement complete.
M&L for RCC (Nominal mix) type B1 1:2:4(20mm graded aggregate) for Beams, cantilevers,bressummers, lintels over 1.5m span complete.
Supplying & applying Integral waterproofing compound complete.
M&L brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like set in cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L Formwork for rough finished surfaces of concrete to sides and soffits of floor or roof beams, beam haunch girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams complete.
M&L for Formwork for rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.
S&F factory made 30mm thick flush shutter , Solid core , construction with solid board core and plywood face panels commercial type on both sides complete.
Taking down shutters area exc 1 sq. m and n exc 2 sq. m each and refix in the same opening complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
S&F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete all as.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F in repairs 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F in repairs Stainless steel butt hinges medium weight 100mm long complete.
S&F 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F in repairs 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete..
S&F in repairs 150mm extruded aluminium alloy handles fabricated type anodised complete..
S&F MS Auto hinges size 120x60x40mm & cup size 35mm of crank 0 degree & 90 degree, fixed with screws to timber frame complete.
S&F magnetic catcher of size 67 x 36 x 67mm for cupboard with suitable screws complete.
S&F in repairs 25 mm dia curtain rod mild steel, chromium plated with fixing brackets, stops, rollers etc. complete.
S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete
M&L TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders gth, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips complete.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F mild steel Gde Fe 410-O or Fe 310-O Chowkhats and frames of door shutters ( any type, size etc.) of angle, Tee or any section with MS plates/ gusset plates, cleats, hold fast etc including fixing of hinges by welding, complete.
S&F powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc complete .
M&L aluminium decorative grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete.
S&F 4mm thick coloured textured designer ceiling board of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24mmx25 mm, wall angle shall be 0.63 mm thk of section 24mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyster coated in off white/white in colour complete .
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges valley gutters etc fixed with self tapping screws complete.
S&F in repairs 18mm thick high density PVC foam board shutter, prelaminated both side with decorative choice lamination including required beading & fixed with nails / screws to frame works as in cabinets cupboards shutter etc complete.
M&L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. complete.
M&L for machine cut Kota stone slab 15-18mm thick in riser of steps, skirting, dado and pillar laid over 1:4 cement screed and jointed complete.
M&L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and fair without using extra cement, as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
M&L for 75mm thick cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in subbase for floors complete.
S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 complete.
M&L for Non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
M&L machine pressed pre-cast coloured glossy finished designer type concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-40 grade with grey cement and pigment laid in 25mm tick sand cussion complete.
S&F precast PCC kerbs stone machine pressed factory made of size 300x100x300 mm (L-300mm T-100mm H-350 mm) in M-25 grade cement concrete (PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required maximum depration from a straight edge, incl all necessary earth work complete
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface fair and even with out using extra cement complete.(WPC measured and paid separately).
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with Priming plastered and other surfaces with alkali resistant priming paint & 1.5mm average thick wall care putty complete
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1.5mm average thick wall care putty with Priming plastered and other surfaces with alkali resistant priming paint complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of white cement primer complete.
M&L for complete removal of existing treatment and applying two coats cement base paint on over one coat of primer on walls complete.
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for Preparation of old treated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint complete.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete.
S&F 15mm dia bore medium grade steel tube with all fittings (such as bents, elbows, tees, short pieces, I connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete all as.
S&F 20 mm medium grade steel tube with all fittings (such as bents, elbows, tees, short pieces, I connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls, in floors, ceiling and making good complete.
Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete.
S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and directed.
S&F in repair CP bib taps cast copper alloy fancy type with cruth or butterly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete.
S&F in repairs stop/angle valve 15 mm dia cast copper alloy CP Fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete
S&F in repairs gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia complete.
S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe complete.
S&F in repairs PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F in repairs PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) bends any radius, 75 mm bore complete.
S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete.
S&F in repairs PVC (SWR) vent cowl, 110 mm dia complete.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
M&L Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested complete.
M&L Reinforced concrete pipes, class NP2, 150mm dia laid and jointed complete with collars complete.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete.
S&F in repairs vitreous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging with PVC (SWR) P trap device complete.
S&F in repairs vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including connecting to fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank) including provn of lime concrete bedding complete all as.
S&F in repairs vitreous china urinals, bowl type flat back size 465 x 355 x 265 mm white including providing and fixing plugs bedding urinal against wall CM 1:2 securing urinal with 60mm long brass screws pointing around urinal back in cement, fixing grating and urion for discharge pipe complete fixed complete.
S&F in repairs 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.
S&F in repair soap dish stainless steel glossy finish fixed with screws & similar to cat BA 15S of prayag make type complete.
Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 97 above but for One fan point controlled by one switch.
All as per Item No 97 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 97 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 97 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F angle holder insulated polycarbonate body with back plate complete.
S&F switch piano flush button single pole one way 6 amp complete.
S&F switch piano flush button single pole one way 16 amp complete.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete.
M&Lin repairs submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F LED fixture 8 watt including connection & similar to Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable & similar to Philips cat ref no. WT202W LED6S CW PSU S1 PC complete.
S&F in repairs energy efficient recessed mounted LED luminaries suitable for for 2'x2' grid 35/36 watt 220 V AC ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white color PVC insulated & sheathed three core flexible multistranded copper conductor cable & similar to cat LCTLRN 36 CDL of crompton make type complete.
S&F in replacement MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F in replacement MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.
M&L in repairs earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in replacement MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete
S&F in replacement MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete
S&F in replacement MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store complete.
Hanging only Ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete.
S&F exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .