RBK (473),2020-21 ARUVATTUKONAM ANGANWADI ROAD IN VELLARADA GP

Amount

DETAILED ESTIMATE

3.2 : Preparation of Foundation for EmbankmentScarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical MeansScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

4.11.2 : Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. <br>(ii) Using Gravel mix soil.

4.9 : Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.9.2.2Z : 20mm thick Open-Graded Premix Carpet using Bitumen S-65 and Antistripping Agent <br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - II By Mechanical Means <br> (II) Bitumen (S-65)

75.5.12.B.3.2Z : Seal Coat - Mechanical Means - Type C - Bitumen S-65 and Antistripping Agent <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> B. By Mechanical Means <br> Case - III : Type C <br> (II) Bitumen (S-65)

3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

od1031221/2020_2021 : Construction of plain cement concrete pavement ,thickness as per design,over a prepared subgrade /&lt;br&gt;sub base,with 43 gradecement or any other type as per clause 1501.2.2 M 20 (grade),coarse and fine&lt;br&gt;aggregates conforming to IS383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a&lt;br&gt;concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix&lt;br&gt;design,laid in approved fixed sideformwork(steel channel, wedges,steel plates including levelling the&lt;br&gt;formwork as per drawing),spreading the concrete with showels,rakes,compacted using needle vibrators&lt;br&gt;and finished in continuous operation including provision of contractionand expansion ,construction joints,&lt;br&gt;curing of concrete slabs for 14 days with water finishing to lines and grade as per drawing and Technical&lt;br&gt;Specifications clause 1501

od1031214/2020_2021 : Supplying and fixing nameboard of size 75x60cm installed in appropriate place visible to public made of brick wall with granite plaque should be inserted and engraving letters etc complete as direction of deptl officers at site

Bidder Name

PRASANTH