38/2024-25/EDCR Shifting of 33 KV Line of Milak Substation as per request of Sr. Vimal Kumar under deposit scheme under jurisdiction EDD-Milak, Rampur

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

Cross Breacing

STP 13 Mtr Long

33 KV X-Arm V Type

Top Channel

ACSR Dog Conductor

Stay set Complete

Earthing Complete

Polymeric 33 KV Pin Insulator with Pin

Disc Insulator 70 KN with fitting

33 KV Disc fitting

STP Pole(Srap) Site to Store

AL Scrap Site to Store

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

13 Mtr long STP Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

13 Mtr long STP Pole

b) Tri Pole Structure Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

13 Mtr long STP Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. b) Four Pole Structure

13 Mtr long STP Pole

Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Providing and Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 33 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing Disc Insulator 70 KN with fitting as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 33 KV Disc Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Dismentaling of Existing Jarjar wire per RESPO Norms and as per direction of Supervising Engineer

Dismentaling of Existing STP Pole per RESPO Norms and as per direction of Supervising Engineer

Providing and Painting Red Oxide Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and Painting Aluminum Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp and Nut bolts per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Barbed wire per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing F Bracket with Nut Bolt per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp for Bressing with Nut Bolts RESPO Norms and as per direction of Supervising Engineer

S A TRADERS (BID ID -4795172)

arshcontractor (BID ID -4795156)