REPAIR AND MAINTAINANCE OF INTERNAL ELECTRIFICATION FOR TECH AREA, OTM AREA 39.37 ACRES AT GOA UNDER GE(I)(CG) GOA

Amount

Taking down aluminium/copper point wiring (light, fan, socket or power) complete including fitting and fixtures such as switches, ceiling roses, pendant, regulators, sockets, light fitting etc and making good the disturbed surface complete all as specified and directed.

Taking down submain wiring aluminium/copper of any size including earth continuity conductor on conduit and removing from site and making good the disturbed surface of the wall etc. complete all as specified and directed.

Taking down existing DB TPN four way and DB SPN 8 way of any capacity and size and removing from site and making good the disturbed surface of the wall etc. complete all as specified and directed.

M & L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC casing caping medium grade of size 25 mm, etc fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of modular metal fush box module include modular white cover plate with frame top cover for housing switches sockets etc concealed on wall complete all as specified and directed for the following:-

(a) One light point controlled by one switch

(b) One call bell point controlled by bell push

(c) One fan/exhaust fan point controlled by one switch & regulator

(d) One 3 pin socket outlet 5 Amps point independent

(e) One 3 pin socket outlet 5 amps on the same board

(f) One light point controlled by two, two way switches

All as per item No 4.00 above but with 2.5 sqmm copper cable through casing and caping of suitable size and one run of 2.5 sqmm copper cable of upto earth dolly earthing for 15 Amps socket outlet independent complete all as specified and directed

S & F in repairs MCB DB SPN double door 8 way sheet metal enclosure SPN 240 V 50 Hz horizontal with IP-42 degree protection complete all as specified and directed.

S & F in repairs MCB SP 06 to 32 Amp, 'B' Series 230 volts, complete all as specified and directed.

S & F in repairs MCB SP 06 to 32 Amp, 'C' Series 230 volts, complete all as specified and directed.

S & F in repairs MCB SPN'C' series 32 Amp, 230 volts, complete all as specified and directed.

S & F in repairs MCB SPN'C' series 40 Amp, 230 volts, complete all as specified and directed.

S & F in repairs switch piano single pole flush type 5 amps, 230 volts including removal old existing unsv one complete all as specified and directed.

S & F in repairs switch piano single pole flush type,two way, 5/15 amps, 230 volts including removal old existing unsv one complete all as specified and directed.

S & F in repairs socket flush type multipurpose 2/3 pin 15 amps 2 in 1, 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F in repairs switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts all as specified including removal old existing unsv one complete all as specified and directed.

S & F in repairs switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type including removal old existing unsv one complete all as specified and directed.

S & F in repairs ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm including removal old existing unsv one complete all as specified and directed.

S & F in repairs ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply including removal old existing unsv one complete all as specified and directed.

S & F in repairs lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks including removal old existing unsv one complete all as specified and directed.

S & F in repairs bell push one way single pole including removal old existing unsv one complete all as specified and directed.

S & F in repairs modular electronic fan regulator 2 module type including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular switch 1 way 6A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular switch 2 way 6A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular switch 1 way 15A, 1 module including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular Bell push 6A 1 module including removal old existing unsv one complete all as specified and directed.

S & F in repairs Ding dong Bell type, 230 volts, single pole including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular socket, 6A -2/3 pin combined 2 module, including removal old existing unsv one complete all as specified and directed.

S & F in repairs Modular socket, 6A/16A-2/3pin combined 2 module, including removal old existing unsv one complete all as specified and directed.

S & F Switch Flame proof rotary type with termination box in LM6, 16A, single pole 240V including removal of old existing unsv one complete all as specified and directed

S & F in repairs 12 module modular white cover plate with frame complete all as specified and directed

S & F in repairs 8 module modular white cover plate with frame complete all as specified and directed

S & F in repairs 6 module modular white cover plate with frame complete all as specified and directed

S & F in repairs 4 module modular white cover plate with frame complete all as specified and directed

S & F in repairs 3 module modular white cover plate with frame complete all as specified and directed

S & F in repairs 1 module modular white cover plate with frame complete all as specified and directed

S & F in repairs MCB TPN 'C' series TPN 40 Amp , 415 volts, 50 Hz, 10 KA complete all as specified and directed.

S & F in repairs MCB TPN 'C' series TPN 63 Amp , 415 volts, 50 Hz, 10 KA complete all as specified and directed

S & F in repairs RCB 25/ 32 Amps, double pole 30mA, 240/415 volts, 50Hz, Breaking Capacity 10 KA complete all as specified and directed.

S & F Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S & F in repair LED tube light fitting 1 x 20 W, 230V wall mounted integrated batten, 4 ft LED module shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed

S & F in repair LED tube light fitting 1 x 10 W, 230V wall mounted integrated batten, 2 ft LED module shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed

S & F in repair LED inverter batten tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre-wired, works on AC suuply in Normal mode and DC supply in Inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency, high lumenscommercial output and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed

S & F in repairs LED inverter batten tube light fitting 1 x 9 W, 230V wall mounted integrated batten 2 ft LED module fixed on wall / surface / ceiling shall confirm to IS 16103 and shall BIS certification marking complete will all accessories internally pre-wired works on AC suuply in Normal mode 5 Each and DC supply in Inverter mode, with inbuilt battery back up of upto 4 hours, high efficiency, high lumens commercial output and including complete all as specified and directed

S & F in repair LED lamp 9W, 230V, insulated body, with back plate for batten fitting complete all as specified and directed.

S & F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

S & F in repairs 1 x 36 watts LED building security light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights complete all as specified and directed

S & F in repair 9 Watts LED Bollards light with opal acrylic diffuser and IP 66 protection complete all as specified and directed

S & F Post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S & F Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S & F in repair LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed

M & L for submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 4 Sqmm copper conductor cable conforming to IS 694 FRLS drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 4 Sqmm PVC unsheathed copper conductor and connected to earth dolly complete all as specified and directed. [Note - 02 run of 4 Sqmm, 01 run of 4 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length]

M & L Submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 6 Sqmm copper conductor cable conforming to IS 694 FRLS drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 4 Sqmm PVC unsheathed copper conductor and connected to earth dolly complete all as specified and directed. [Note - 02 run of 6 Sqmm, 01 run of 6 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length.

M & L Submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 6 Sqmm copper conductor cable conforming to IS 694 FRLS drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 4 Sqmm PVC unsheathed copper conductor and connected to earth dolly complete all as specified and as directed. [Note - 04 run of 6 Sqmm, 01 run of 6 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length]

S & F in repair earthing complete with galvanised plate Each iron electrode 600 x 600 x 6.00mm thick GI earthing lead burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with the top edge of the plate at a depth not less than 1.5 mtr from below normal GL, connected to and including Galvanised iron strip 32x6 mm as earthing lead by means of nuts, bolts, washers, checknuts of galvanised iron and connected to earthing test point all as shown in electric plate No. 3 of SSR Part I of 2010 and as specified or indicated and testing on completion including excavation / earth work in any type of strat PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement cioncreat (1:2:4) type B1 (Reinforced with welded steel wire fabric (XPM)) weight not less than 4 Kg/sqm,cast iron frame, funnel with wire mesh, including Gl earth strip with Gl protection pipe of 40mm medium grade 7.5 meter long etc complete and testing on completion complete all as specified and directed

S & F in repairs Earth continuity conductor or main earthing lead RM fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x 4 mm galvanised iron Strip complete all as specified and directed

Removing refixing of defective socket, piano/modular switches, switch socket by repairing the same including provisioning minor screws and made functional complete all as specified and directed.

All as per item No 55.00 herein before but lamp holder, bulk head fittings, ceiling rose etc complete all as specified and directed.

All as per item No 55.00 herein before but LED fittings & FTL fittings etc complete all as specified and directed.

All as per item No 55.00 herein before but for all type of DBs etc complete all as specified and directed.

U k Enterprises (BID ID -3084674)

SHIVANI ENTERPRISES (BID ID -3081213)

Shree Ram Enterprises (BID ID -3086373)

Dhanu Refrigeration (BID ID -3094050)

BRO TECH ELECTRICAL & ENGINEERING SOLUTION (BID ID -3084830)

star freeze service (BID ID -3085260)

NATIONAL ENGINEERING CORPORATION (BID ID -3087353)