RENOVATION OF CIVIL INFRASTRUCTURE IN AUDITORIUM AT BISAG N GANDHINAGAR

Amount

Taking down aluminium chowkhats with glass shutters( without taking off shutters from the frame) exc 4.00 sqm each.

Taking down for MS door /Aluminium window chowkhats or frames with shutters( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris outside BISAG-N.

Demolition of stone slabs & tiles, kotastone of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

Demolition of RCC of any description and in any position all as specified

Removing building materials (Bricks, Brick dust, stone, sand, aggregate, tiles) etc. to a distance up to 500 m lead as directed by Engr inCharge. Note : Rate quoted shall deem included for loading &unloading and stacking at the destination complete,

Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep not exc10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc 1.5m deep but not exc 3.0 m deep not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil as required and directed.

Removing excavated materials soil n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point.

M&L ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed.

M&L ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed by Engr-in-Charge.

M&L Liquid water proofing compound approved make ISI marked complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete for base of manholes all as specified.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed

M&L PCC 1:3:6 type C0 as in filling/packed with back side all around pressed steel frame complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kneelers, coping etc complete all as specified and as directed

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in benching complete all as specified and as directed

M&L RCC 1:2:4 (Nominal Mix) type B1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams and plinth beams etc., complete all as specified and directed.

M&L RCC 1:2:4 (Nominal Mix) type B1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC 1:2:4 (Nominal Mix) type B1 using 20mm graded stone aggregate as in beams, lintels over 1.5m span, bands etc complete all as specified and directed.

M&L Extra for forming fair finished channels 30cm inner girth in cement concrete using extra cement including forms moulds etc complete all as specified and directed.

Supply only integral water proofing compound

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan to any radius in half brick thick wall , built in cement mortar 1:4 complete all as specified and directed.

M&L 18.20 mm thick Italian Marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB platform in any position including screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- Single peice for WHB table top.

M & L Form works rough finished surfaces of concrete side of concrete foundation , footing , bases of columns raft and raft beams sides and soffits if any of foundation and plinth beams and similar work flat , vertical or to batter complete all as specified and directed

M&L Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M&L Form work to sides and soffits of beams lintel band, roof beams and the like (finished rough) complete all as specified and directed..

M&L 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match with vision panels or peepholes, square or rectangular including lipping complete all as specified and directed.

S&F Ist class Hardwood plain, solid, straight chowkats/and frames, including shutters wrought, framed rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, complete all as specified.

S&F 150mm long extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 200 mm extruded brass barrel tower bolts, with cast and sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 300 mm brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 4 levers Brass Mortice lock vertical type, size 100mm all as specified and directed.

S&F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified.

M&L Mild steel bars 10mm dia and over confirming to Fe-500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L Mild steel bars 8mm dia confirming to Fe-500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S & F MS TMT bars 5mm dia and over upto and cut to length , bent to shape required including cranking bending spirally and including 10mm dia in stirrups, spacers and binders including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate FI hold fast complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-W(Gde-E-250)quality-A) complete all as specified and directed..

S&F MS plates (plain or chequered) of Grade Fe 410-W (Gde- E-250) quality-A as in connecting plates, base plate etc. with riveted, bolted or welding etc complete all as specified and directed

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square of length of bolt exc 22.5cm and n exc 30cm long 16-20mm dia complete all as specified.

M&L Pre-painted galvatume aluminum zine coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in root covering/cladding to wall, fixed with self tapping screws as specified

M&L Plain, Aluminium sheeting 0.71mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S&F Fully perforated 12mm thick micro regular edged or 10 mm thick square edged G.R.G. (Glass fibre Reinforced Gypsum) False ceiling tiles of size of 595mm x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476(part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic raw plugs at 450 mm centre to centre and 40mm long dry wall wood screws. All accessories should be fixed as per manufacturer's instructions. complete all as specified and directed complete all as specified and directed Make - Gyproc of Saint Gobain/Armstrong or equivalent.

M&L 18-20mm thick Z black / lakha red granite work (table rubbed and polished including moulding, polishing) as in floor etc in any position including 15mm thick screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling/demolition of existing floors complete all as specified and directed.

M&L 18-20mm thick Z black / lakha red granite work (table rubbed and polished including moulding, polishing) machine cut, in skirting/ dado or as in door frames for fixing shutter laid over and including cement CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. Note:- Single rice of each platform.

M&L 100 mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as directed

SF 4.5 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting with linoleum is sealed down with an approved adhesive complete all as specified as directed.

M&L Rendering to brick/concrete surfaces 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified. Note:- Water proof compound will be measured and paid separately.

M&L Rendering to brick/concrete surfaces 15mm thick in CM (1:4) on other than fair faces of brick work complete all as specified.

M&L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick rendering in two layers first coat 10mm thick and second coat 5mm thick in CM 1:4 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth without using extra cement mixed with WPC in external surfaces of wall including necessary scaffolding as per requirement complete all as specified and as directed. (Note :- WPC shall be measured and paid under respective item).

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and as directed.

M&L Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

M&L Preparation of new plaster surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed..

M&L Complete removal of old treatment of old surfaces of wall by booming down or steel wire brushing, scrapping down smoke, efflorescent salts, oil, greasy spot or peeled off surfaces and applying a layer of Birla white putty 2mm thick even and smooth and applying two coats of plastic emulsion paint (approved quality & tint) over a coat of alkali resistant primer using painting roller all as specified and directed. Make Royale Shine of Asian or equivalent.

M&L Preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise described for and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

M&L French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified Make : Berger/ Asian/ Shalimar/ Nerolac/ Power/ Sheenalac

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.

S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed..

S&F 15 mm dia Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20 mm dia Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repair all as specified and as directed.

S&F 25 mm dia Gun metal, globe or gate valve, with iron wheel head ,screwed both ends for iron pipe and fixed complete as in repair all as specified and as directed

S&F 1000 Litres capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position all as specified in SSR part -I including 25 mm ball brass valves, high pressure with polythene float and flynut ,screwed for iron pipe or brass ferrule fixed and complete all as specified as directed.

S&F 25 mm ball brass valves,high pressure with polythene float and flynut complete ,screwed for 25mm iron pipe or brass ferrule fixed and complete as in repair all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F PVC(SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC(SWR) 75 mm bore Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC(SWR) 40 mm bore Rainwater drainage pipes , waste, soil , pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC (SWR) 110 mm bends any radius etc. complete all as specified and directed.

S&F PVC (SWR) 75mm bends any radius complete all as specified and directed.

S&F PVC (SWR) 40mm bends any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) junction double,(double T) with assess door equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction double,(double T) with assess door equal or unequal complete all as specified and directed.

S&F 40 mm PVC (SWR) junction double,(double T) with assess door equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) bore coupler complete all as specified and directed.

S&F 75mm PVC (SWR) bore coupler complete all as specified and directed.

S&F 110 mm PVC (SWR) 'P' trap with accessories complete all as specified and directed.

S&F 110mm thick cast iron/ PVC nahani trap complete all as specified and directed.

S&F 75mm thick cast iron/ PVC nahani trap complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L PCC (1:3:6) type C2 using 40mm graded aggregate for concrete bed to RCC drain pipe or SWG pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L RCC pipes 150 mm dia, class NP2, laid and jointed with collars complete all as specified and directed

S&F 25 mm dia stainless steel curtain rod with brackets on both side with fittings including necessary fixing arrangement in wall of each opening and approved by user etc complete all as specified and directed

S&F 150 mm floor door stopper of brass powder coated, with hard down steel spring complete all as specified and as directed.

S & F Aluminium powder coated ( min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fabricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) portion glazed with 3mm thick frosted glass including rubber bedding and glazing clip half portion louvers of 80mm wide and 4mm thick frosted glass including aluminium louver patty including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperture with 25x3 mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down of old ventilator complete all as specified and as directed. Make:-Indal/Jindal.

S&F 12 mm thick frosted glass, toughened door frame shutters fixed to wall/floor with suitable stainless steel pivot, stainless steel 350mm long 'H' Types glass door handle standard, locking arrangement including frosted sheet 1mm thick and all other accessories and the edges of the glass should be properly moulded/grinded all as specified and directed.

S&F Rimless back to wall WC with UF soft close slim seat cover, hinges ,fixing accessories and accessories set of size 370mmx580mmx430mm with 'P' trap 180 mm complete all as specified and as directed. (Make :-Jaguar Cat part No-OPS-WHT-15955P180UFSM or Equivalent))

S&F Control Plate Alive flush including accessories complete all as specified and as directed. (Make :-Jaguar Cat part No JCP-CHR-852415 or Equivalent)

S&F Single piece slim Concealed cistern with floor mounting frame ,installation kit and ''P- Type " Drain Pipe connection set for wall hung WC complete all as specified and as directed. (Make :-Jaguar Cat part No JCS-WHT-2400FP or Equivalent)

S&F Hand rail wall mounted hinged size 750x100 mm complete all as specified and directed Make : (Cera CAT No. B2210108 or Equivalent)

S&F Wall mounted Grab bar 600mm long complete all as specified and directed (Cera cat No. B2210106 or Equivalent)

S&F Wall mounted inverted 'L' shaped grab bar with 500 & 700mm long bars complete all as specified and directed Cera cat No. B2210103 or Equivalent)

S&F Round shape thin rim table top basin with fixing accessories of size 480mm x480mm x135 mm complete all as specified and as directed. (Make :-Jaguar Cat part No OPS-WHT-15901N or Equivalent)

S&F 32mm Waste coupling full thread with 130 mm height for wash hand basin etc complete all as specified and directed.(Make :-Jaguar Cat part No ALD-705L130 or Equivalent)

S&F Urinals (Back inlet) with and fixing accessories of size 385x325x635 mm including SS 32mm Waste coupling full thread, Auto closing Concealed Urinal Flush Valve with wall flange complete all as specified and directed. (Make :-Jaguar Cat part No URS-WHT-13253N,ALD-705, PRS-073 or Equivalent)

S&F Bottle traps 32 mm size with 300mm and 190 mm long wall connected pipes and wall flange for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing ,union, cap and fixed complete all as specified and directed ( Make :- Jaguar cat no. ALD-769L250x190 or equivalent)

S&F Towel ring square with round flange complete all as specified and directed by Engr-in-Charge Make : (Jaquar CAT No. AKP - 35721P or Equivalent)

S&F Towel Rack 600 mm long with Lower hangers complete all as specified and directed by Engr-in-Charge Make : (Jaquar CAT No. AQN- 7781 or Equivalent)

S&F Double Coat Hook complete all as specified and directed by Engr-in-Charge Make : (Jaquar CAT No. AQN-7761 or Equivalent)

S&F Wall mounted Soap dish (Polycarbonate) holder with wall flange complete all as specified and directed Make : (Jaquar CAT No. AQN -7733 or Equivalent)

S&F Soap dispenser with metallic bottle complete all as specified and directed (Make :-Jaguar Cat part No ACN-1137N or Equivalent)

S&F Toilet paper holder with Flap Recessed type stainless steel flap with wall fange , (Make :-Jaguar Cat part No AHS-1553 or Equivalent)

S&F Bib cock with wall flange complete all as specified and directed Make:- Jaquar CAT No OPP-15037PM or Equivalent) as approved by GE

S&F single lever Tall boy with 150mm Extension Body fixed Spout without popup waste with 600 mm long braided hoses complete all as specified and as directed.(Make :-Jaguar Cat part No OPP-15005BPM or Equivalent)

S&F Angular stop cock with wall flange complete all as specified and as directed.(Make :-Jaguar Cat part No OPP-15053PM or Equivalent)

S&F Hand shower (Health Faucet) brass chromium plated with 8 mm dia 1.2 meter long flexible tube and wall hook(back flow preventer ) complete all as specified and as directed.(Make :-Jaguar Cat part No ALD-577 or Equivalent)

S&F Stainless steel grating doom 150x150mm complete all as specified and directed.(Make: Jaquar or equivalent)

S&F 32mm PVC waste pipe for wash hand basin/urinal/sink 900mm long complete all as specified

S&F Wall mounted automatic hand dryer machine for washroom fixing with nails/screws etc complete all as specified and as directed.( Make:- Dolphy or equivalent)

S&F PVC Wall panelling of Multi Chambered UPVC Panel of 295mm Wide , 2900mm Length,10mm Thickness,1mm Wall thickness with 10 mm thick ribs, Can be interlocked by tongue n groove method Flat Surface with Multiple Grooves in between for Aesthetic Look ,Shall be Availed in Flat, 2/7/ 9 Groove pattern. Internal batten shall be made of solid UPVC foam profile with 26 mm width and 8mm thick. Batten aligned horizontally along the wall with 50 mm gap above the floor & below the ceiling, Internal battens shall be fixed 450mm centre to centre in between. Junctions & corners should be covered by solid foam beading profiles complete all as specified and directed.(Make :-Veenus/Giza/ Sintex or Equivalent)

S&F Rain water single pipe line of 110 mm (4") dia vertical fixed with wall distance 3" with Each plumbing pipe clamping support made of U bolt R/M for 110mm dia pipe rain water bracket and channel support for pipe made of low carbon deep draw hot roll gauge corrected mild steel with ribs and notches are hot dip + Zn Al flake coated. The U bolt R/M are made of low carbon mild steel with rod diameter 7.5mm aprox. Zn Al Flake coated with semi Transparent Ribbed Silicon Rub Sleeve, with Flange nut set having natural serration - Zn Al Flake coated refer Technical drawing etc complete all as specified and as directed by Engr- in-Charge (i) Rain water bracket for 160mm pipe (6") with channel support with wall distance (3") (ii) U bolt R/M for 160 mm pipe Dia -1 No (iii) Justi Khilla 2.2/2" size Zn coated 2 Nos complete all as specified and directed.

S&F Techno acoustic non-woven polyester fibre panels size 2440mm x1219mm x10 mm paste with bostic glue fixed on wall surfaces complete all as specified and as directed by Engr-in-Charge.

M&L HD matt finished double charged polished vitrified slab/ tiles of size:-1200mm x180mm x 15 mm thick (square/ rectangular) as in floors etc. set and jointed as per manufactures instructions and pointed in white or coloured cement to match over screed bed 15mm thick CM (1:6) with tile adhesive complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1, using 12.5mm graded aggregate as in padding complete all as specified as directed.

M&L HD matt finished double charged polished vitrified slab/ tiles of size:-1200mm x180mm x 15 mm thick (square/ rectangular) as in floors etc. set and jointed as per manufactures instructions and pointed in white or coloured cement to match over backing coat 10mm thick CM (1:3) with tile adhesive complete all as specified and directed.

M&L Outdoor Stone duck tiles 15 mm thick (square/ rectangular) area of each tile size: 600 x 600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM (1:6) complete all as specified as directed.

S&F Letters indication metal signs of SS Grade 304 with acrylic 3mm thick grade 040 signage or doors as per manufacture specification complete all as specified as directed.

S&F Powder coated aluminium frame with acrylic letter 3 mm thick with LED light and power supply connection and fixing arrangement of size 300mmx750 mm as per manufacture instruction complete all as specified as directed.

S&F Powder coated aluminium frame with acrylic letter 3 mm thick with LED light and power supply connection and fixing arrangement of size 450mm x750 mm as per manufacture instruction complete all as specified as directed..

S&F Powder coated aluminium frame with acrylic letter 3 mm thicks with LED light and power supply connection and fixing arrangement of size 500mm x 600 mm as per manufacture instruction complete all as specified as directed.

S&F Powder coated aluminium frame with acrylic letter 3 mm thick grade 040 signage /arrow signage with LED light and power supply connection and fixing arrangement of size 300x300 mm ) as per manufacture instruction as per manufacture instruction complete all as specified as directed.

S&F SS letters Grade 304 size 300x300 mm including fixing arrangement in wall as per manufacture instruction complete all as specified as directed.

S&F Toilet cubicle (of following standard dimension including door of any description or size made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by Govt approved test lab. Finish of the compact laminate should be Suede / *Raw Silk, which includes doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawings and as per IS: 2046 (Indian Standard) ,as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware matching with HPL boards or as per client requirements like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U-Channels, (6) Shoe Box Plate (7) MS-Base Plate, (8) Top rail with Corner connector (9) Rubber noise deafening tape (10) Screws & wall Plugs. The top fitting should consist of round top rail which will get fixed with pilasters, with SS panel tube holder, SS corner bend (connected with top rail) will be used on the corner of cubicle in absence of brick wall, wall fixing is used only on the wall which will hold the top rail. All screws will be of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel bottom cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 75mm. The parts are as under :- Make : Greenlam Industries Limited or equivalent make as approved by GE

Toilet cubicle I-Shape (Front Partition) with standard dimension of size upto( 2100 mm Height and 1500mm Width ), including door shutter complete accessories all as specified as directed by Engineer in-charge.

Toilet cubicle I-Shape (Front Partition) with shelf 3 tier standard dimension of size upto (2100mm Height x 1000mm width) including door/shelf complete all as specified as directed by Engineer in-charge

Urinal Partition with standard dimension of size upto (1200 mm Height and 450 mm width) made of above specification complete all as specified as directed by Engineer in-charge.

Lockers unit self-supporting 9mm Shutter, Shelves & Skirting 1,3mm (Back and centre partitions) and 6mm[Sides) thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Green guard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Aluminium alloy grade 6063-T6 available in Charcoal black or natural anodized Finish hardwares as per manufacturer's specifications & Architects instructions like [1] Mid and corner extrusion made up of aluminium alloy grade 6063-T6 available in Charcoal black and Natural Anodized Finish [2] SS grade 316 Key Lock I Standard) & Numeric Lock (Optional) in Charcoal black Colour. (3) SS grade 316 Hinge available in Charcoal black Colour powder Coating/ SS brush finish [4] Black sound buffer rubber Profile. [5] SS grade 316 thread Cut Screws for Fixing Top and Bottom Plate. Top, Bottom, Shelves and Skirting are made of 9mm thick compact laminates, Side, Intermediate and Back walls are constructed of 3mm and 6 mm compact laminates.All screws will of 316 Grade in stainless steel with satin finish. All panels are supported by 9mm thick compact skirting with 80mm height complete all as specified and as directed by Engineer in-charge.

(i) Locker 3 Tier with standard external dimension of width 300mm, internal depth 435mm, outer depth 465mm, height of locker 1898mm, door height of each tier 597mm and height of skirting is 80mm complete all as specified as directed.

(ii) Locker 4 Tier with standard external dimension of width 300mm, internal depth 435mm, outer depth 465mm, height of locker 1898mm, door height of each tier 447mm and height of skirting is 80mm complete all as specified as directed.

Vanity self- supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Green guard-Gold standards. This also includes providing and fixing in position necessary hardware made out of hardwares as per manufacturer's specifications & Architects instructions like (1) L bracket (2) Screws & wall Plugs | SS-316). Vanity box should be joined with 12 mm thick compact laminates on front side upto length of WHB area.Standard offered size is 600mm (W) x 500mm [D] X 600mm (H) complete all as specified as directed.

Vision Barrier self-supporting 12mm thick compact laminates made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Green guard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Stainless steel/Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available colour hardwares as per manufacturer's specifications & Architects instructions like [1] Double Coat hook made in SS 316 in SS brushed finish with fine spark texture on nylon parts [2] U & F-profiles in Aluminium alloy grade 6063-To with powder coating in available colours (3) SS grade 316/Nylon divider mounted sleek leg with Ground Clearance [120-150mm) (4) Aligning SS grade 316 common top rail 25.4mm diameter round pipe fixed with wall connector made of 316 grade stainless steel in brushed finish (5) Screws & wall Plugs (SS-3161.Available Design Options 11-Loop In: 12mm thick compact with minimal wall touch divider of size 730mm(D) x 1830[H] with ground clearance of 150mm mounted on sleek leg, fixed with bracket, hence higher hygiene quotient. With In-built hook design feature within dividers for improved utility. 21-Loop Out: 12mm thick compact divider with straight edge of size upto 730mm(D) x 2100(H) with ground clearance of 150mm mounted on sleek leg, fixed with U profiles of size 18mmx16mm. All screws will be of 316 Grade in stainless steel. All pilasters are supported by grade 6 Nylon Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm.

S&F FRP manhole covers, frame and gratings having clear opening of 600 mm dia for manhole covers and installed as per manufacturer instruction. The top layer of covers, frames, and gratings consists of quartz and conundrum crystals, bonded with special grade of UV stabilised resin to get good abrasion resistance. The fibre glass shall be reinforced with glass fibre in the film of UD stitched, multidirectional wooden roving to get good tensile and flexural strength and embedded in the matrix of UV stabilised and high tensile strength modified especially to suit this application. The frame shall be embedded in 300 x 200 mm of minimum M20 grade concrete and top level of frame should match with fixed surface etc complete all as specified and directed

M&L Point wiring for modular accessories with modular metal flush box complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge. for the following.

One light/bell/fan point controlled by one switch complete

One 3 pin socket out let 5 Amps on the independent board.

One 3 Pin socket out let 5 Amps on the same board.

All as above item No.131 above but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug 15 Amps. Complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 6A,1 Module, as per existing make crabtree/ABB/indoasian/ss/anchor roma etc ,complete all as specified and directed

S&F Modular switch one way 16A,1 Module,as per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 6/10A-2/3 pin combined 2 Module as per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 16/15A-2/3 pin combined 2 Module as per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 6A,1 Module, as per existing make crabtree/ABB/indoasian/ss/anchor roma etc ,complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 16A,1 Module,as per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 6/10A-2/3 pin combined 2 Module As per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 16/15A-2/3 pin combined 2 Module As per existing make crabtree/ABB/indoasian/ss/anchor roma etc complete all as specified and directed by Eng-In-Charge.

S& F Ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge.

S & F White cover plate with frame , 3 module complete all as specified and directed by Eng-In-Charge.

S & F White cover plate with frame , 6 module complete all as specified and directed by Eng-In-Charge.

S & F White cover plate with frame ,8 module in replacement complete all as specified and directed by Eng-In-Charge.

S & F White cover plate with frame ,16 module in replacement complete all as specified and directed by Eng-In-Charge.

M&L Sub main wiring complete with two run of 6 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit/casing capping (ISI marked) with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling and incl sunken type pressed steel terminal boxes with 3mm thick Bakelite white/coloured (as approved) top cover including 6 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :- Two run of 6 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length complete all as specified and directed by Eng-In-Charge.

M&L Sub main wiring complete with PVC insulated cable two run of 1.5 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 1.5 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 1 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/grey colour complete all as specified and directed.

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 12 ways SPN complete all as specified and directed. Make : Havells/Legraind/L&T/ Anchor

S& F Sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways SPN complete all as specified and directed. Make : Havells/Legraind/L&T/ Anchor

S & F MCB, SPN 240 volts, 40 to 63 Amps capacity complete all as specified and directed

S & F MCB, SPN 240 volts, 5-32 Amps capacity complete all as specified and directed

S & F MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed.

S &F Recess mounted circular LED slim fit low profile down lighter of capacity 18/20 watt complete all as specified and directed Make: Philips/ CG/HPL/Wipro/Havells

S & F Exhaust fan 250/300 mm sweep silent type in PVC Body as required at site complete all as specified and directed. Make:-Bazaz/Havells/Oreint or equivalent

S & F LED light fittings 1x10Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired complete all as specified and directed Make: Philips/ CG/HPL/Wipro/Havells

M/s ESS KAY Construction