PROVISION OF SHED ON BLDG NO P 141 AT CCDT AND SPECIAL REPAIRS TO BLDG NO P 552 AT NAVAL DOCKYARD VISAKHAPATNAM

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundation and mass concrete including column foundation and posts complete all as specified and directed.

M&L for mild steel bolts purpose made with hexogonal head or square nuts & washers screwed one end the other end enlarged and jaggred dia of neck 25mm of length exc 15 cm but n exc 30 cm long complete all as specified and directed.

M&L for mild steel plates plain channels, square cut or notched forming holes, bolted or welded attachement, confirming to Fe- 290 Gde E-165 complete all as specified and directed.

M&L for strctural steel work as in roof truss (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or flat sectios) including distance pieces, cleats etc., confirming to Fe-410-W (Gde-E-250) quality 'A' complite all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Material & labour for pre-painted galvalume aluminum zink coating trapizoidal profile corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self taping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating trapizoidal profile Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note : Plain steel sheet 0.5 mm thick use for ridge, eves and valley gutters.

S&F Steel work in tubular pole including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc., wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 (R) complete all as specified and directed. Note : 1.01 to 1.09 are execute on terrace upto hight 12 mtr, use scaffolding if required.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. (Note:-WPC shall be measured and paid separately).

Supply only integral water proofing compound.

M&L for non skid ceramic tiles 7 to 8mm thick (square) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and over including screed bed in CM 1:6, 20mm thick complete all as specified and directed.

M&L for vetrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles exc. 0.18 sqm and n.exc. 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and over including screed bed in CM 1:6, 15mm thick complete all as specified and directed.

M&L for false ceiling grid using GI perimeter channels of 0.55mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27mm along the perimeter of the ceiling , fixed to wall with nylon sleeves and screws at 610mm intervals, GI intermediate channels of size 45 mm x 15 mm x 0.90mm supported with GI ceiling angle of size 25 mm x 10 mm x 0.55mm fixed to soffits with steel expansion fasterners / GI cleat at 1220 mm intervals, ceiling section of 0.55 mm thick having knurled web of 51.5 mm and two flanges of 26mm each with lips of 10.5mm fixed to intermidate channel with connecting clips and in directions perpendicular to the intermidiate channels at 457 mm centre to centre including fixing Gypsum board of 12 mm thick conforming to IS-2095: 1982 for false ceiling, fixed to ceiling section with 25 mm dry wall screws at 230 mm centres and all as specified and directed including two coats of distemper paint over a coat of primer complete all as specified and directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing,in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

M&L for Rendering 10mm thick cement plaster in CM 1:6 on the prepared surface complete all as specified and directed.

M&L for prepartion of new surface including washing, rubbing down and stopping distempered and painted surfaces on walls and distempering the walls with two coats of distemper oil emulsion over one coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces including complete removal of existing surfaces and applying two coat of distemper oil emulsion over one coat of primer complete all as specified and directed.

Taking out old serviceable glass of any size excluding 1.5 sqm, from old wooden or metal frames, or stone, concrete or brick sorrounds, any thickness or size, hacking out old putty or removing beads etc., including making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and directed.

S & F aluminium decorative grill of any shape not less than 2.7 Kg/SqM complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedastal pattern ) white (Excluding fixing bolts , flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs vitreous china valveless, syphonic action type, flushing cistern low level white with inlet 10 liters capacity complete all as sepcified and directed.

S&F in repairs vitreous china WHB white flat back size of 630 x 450 mm excluding taps waste chain and plug and porcelin stopper but including brakets and with pedestal complete all as specified and directed.

S&F in repairs 32mm dia waste coupling fittings brass chromium plated for glazed ware sinks basins etc., with long screwed shaks and fly nuts flanged and bedded in red lead cement and other end complete all as specified and directed.

S&F in repairs 15 mm dia pillar taps, cast copper alloy with capasten heads chromium plated fancy type, screwed down high pressure for iron pipe and fixed in repair long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs grating of square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F in repairs of Vitreous China urinal back size 465 x 355 x 265mm white (minimum ) with grating and union for discharge pipe (execluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S & F Vitrous China urinal partition white of size 310 x 700mm complete all as specified and directed.

Dismantling of drain pipes of any pattern any dia jointed in cement mortar / solvent cement complete all as specified and directed.

Supply and fix 75 mm dia PVC pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

All as per item No 1.34 above, but 110 mm bore all as specified and directed.

Supply and fix PVC `P` trap of 125 / 110 mm bore complete all as specified and directed.

Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm bore pipe compelete all as specified and directed.

All as per item No 1.38 above, but 75 mm bore pipe.

Supply and fix PVC (SWR) junction single (single T) equal or unequal for 110 mm bore pipe all as specified and directed.

All as per item No 1.40 above but 75 mm bore pipe all as specified and directed.

Supply and fix PVC (SWR) vent cowls of 110 mm bore pipe complete all as specified and directed.

S&F in repairs brass CP Stop valves fancy type with log shank and cup (concealed type) 15mm bore screwd down with crutch handle both end screwed for iron pipe or union complete all as specified and directed

S&F in repairs brass CP Bip taps 15mm bore type with cruth handle ,screwed down screwed for iron pipe or pipe or female complete all as specified and directed

S&F in repairs PVC connection 450mm long with brass union at both ends 15mm bore complete all as specified and directed.

S&F in repairs liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden or plastic cleats. (minimum weight 105 gms) complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of CP fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F in repairs toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm agg) as in foundation, filling, mass concrete etc., complete all as specified and directed.

M&L of broken stone or boulders for hardcore of guage n. exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for RCC in Slabs supported on walls, beams and columns in floors,chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves of type B1, 1:2:4 20mm graded aggregate complete all as specified and directed.

M& L for mild steel TMT bars of 10 mm dia cut to length, bent to shape required, including spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for rendering 10mm thick cement plaster (1:6) on fair faces of brick work complete all as specified and directed.

Removing the demolished/dismantlled materials etc., in loose condition of (2.5 Cum each in loose condition) to a distance of exc 100m & upto 5 Km and deposited where directed by Engineer-in-charge.

Supply & fix 12mm thick glass door of 1.2m x 2.1m each side having 2 Nos. ‘SS’ handles of 500 mm long, with top SS pivot fitting and bottom SS hydraulic floor mounted glass door fitting including necessary fixtures, 1 No. Lock of with key in duplicate, regulated by double action hydraulic floor door spring, door is toughened and glazed with 50 micron thick tinted glass and door is properly installed with appropriately cutting the glass and drilling complete all as specified and directed. Note : This item includes taking down existing wooden door and surface preparation of opening and fixing new door in same opening.

SCHEDULE 'A' PART-II (E/M) PORTION

Taking down copper /aluminium point wiring (light, fan,socket or power) complete including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to store for keepin or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls,floors etc., complete all as sepcified and as directed.

Taking down old unserviceable DB's and main switches along with MCB's and MCCB's.

M&L for point wirng concealled conduit type in non-metallic ISI PVC conduit medium grade with 1.5 sq mm size multi stranded fire retardant PVC sheathed FRLSH copper conductor cable and PVC insulated FRLSH cable of size 1.5 sq mm as earth continuity conductor including clamps, screws gutter / plug etc., with and made good to disturbed wall/with conduit including sheet steel terrminal board with bakelite 3 mm thick sheet for one light point point controlled by one 5 Amps switch one way

All as per item No. 2.03 above but for one fan point controlled by one 5 Amps switch one way

All as per item No. 2.03 above but for One 3/5 pin 5 Amp switch socket outlet on independent board

All as per item No. 2.03 above but for one 3/5 pin 5 Amp socket outlet on same board.

All as per item No. 2.03 above but for drawn through existing concealled conduit.

All as per item No. 2.03 above but for drawn through existing concealled conduit.

All as per item No. 2.03 above but for drawn through existing concealled conduit.

Supply & fix piano switch 5 Amp oneway flush type complete all as specified and directed.

S&F socket outlet 2 in 1,3 pin 5 amp complete all as specified and directed.

M&L for point wiring concealled conduit type in non mettalic ISI PVC conduit med grade with 2.5 sq mm size multi stranded FRLSH PVC sheated copper conductor and PVC insulated FRLSH copper cable of size 2.5 sq mm incl clamps, screws, gutties, plug, terminal boards with bakelite sheet 3 mm thick heavy duty as earth continuity conductor for 3/5 pin socket outlet 15 Amps complete all as specified and directed.

All as per item No. 2.12 above but for drawn through existing concealled conduit.

S&F 15 Amps switch socket combination complete all as specified and directed.

S&F stepped type electronic fan regulators flush type on the existing phenolic laminated sheet etc., complete all as specified and directed.

S&F ceiling rose, 3 phase /PVC/polycarbonate, isolated body complete all as specified and directed.

S&F Angle holder, PVC / polycarbonate type with backplate suitable for batten fittings complete all as specified and as directed.

S&F LED bulb 10 watt 3 star complete all as specified and as directed. Make : Cat Part No-LHLDEUEEML8R010 of Havells / bajaj/ CG/ Phillips

S&F LED recessed full open 2 x 2 fit with highly efficient light smoothy optics to deliver superior illuminous and energy saving of 36 watts complete all as specified and as directed. Make : Cat Part No-BCTBLR 36W LED FP CW of Bajaj / Havells/ CG/ Phillips

Supply & fix LED tube light alongwith fixture 20 W complete all as specified and as directed. Make : Cat Part No.BLRB-DB 118 with batten - BLRB 18W CW LED of Bajaj /Havells/CG/Phillips

S&F SP MCB 6 to 32 Amps 'C' Curve ccomplete all as specified and directed. Make: Cat Part No- 4085-87to 4087-94 of Legrand / Schneider/ABB

S&F SPN MCB 6 to 32 Amps C Curve complete all as specified and directed. Make : Cat Part No- 4086-09 to 4086-17 of Legrand / Schneider/ ABB

S&F TPN MCB 63 Amps 'C' Curve complete all as specified and directed. Make : Cat Part No- 406-83 of Legrand / Schneider/ABB

S&F double door SPNDB 8 way double door with 200 amp rated bus bar complete all as specified and directed.

S&F double door SPNDB 4 way double door with 200 amp rated bus bar complete all as specified and directed.

S&F double door TPN DB 4 way double door with 200 amp rated bus bar complete all as specified and directed.

S&F double door TPNDB 8 way double door with 200 amp rated bus bar complete all as specified and directed.

S & F in replacement vertical double door IP 43 TPNDB 4 way with a provision of 63A TPN MCB as incomming complete all as specified and directed.

S&F 3 Pole MCCB 100 Amps, 50Hz, 415V with rupturing capacity of 16 KA complete all as specified and as directed.

M & L for wiring with 4 runs of 10 sqmm grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 6 sqmm FRLSH grade PVC insulated copper conductor wire for earth continuity drawn in and including non metallic FRLSH ISI marked PVC conduit medium grade dia with conduit accessories, complete all as specified and directed. Note :- 4 runs of cable, 2 runs of earth wire and 1 run of conduit together shall be measured as 1 unit length

M & L for concealled conduit wiring with 4 runs of 10 sqmm grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 10 sqmm FRLSH grade PVC insulated copper conductor wire for earth continuity drawn in and including non A/C metallic FRLSH ISI marked PVC conduit (heavy grade) with conduit accessories and make good disturbed surfaces of wall/ceiling complete all as specified and directed. Note :- 4 runs of cable, 2 runs of earth wire and 1 run of conduit together shall be measured as 1 unit length

S&F 220V AC, 50HZ, single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in groung earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32x6mm upto 7.5 mtr by means of nuts, bolts check nuts, washer of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part I connected to earth test point including excavation in any strata, PCC chamber with 40 mm RCC cover slab with steel reinforcement 8 mm dia TMT bars @ 150 mm C/C both ways with GI protection pipe 40 mm dia light grade upto 7.5 mtr, 20 mm dia tunnel pipe medium grade complete all as specified and as directed.

M&L Earth continuity conductor or main earth lead fixed to wall of batten or recess or chases or buried in ground or drawn in conduct/pipe or any other indicated situation for loop earthy etc., of 32x6 mm complete all as specified and as directed.

S& F LED street light 60 Watt complete all as specified and as directed. Make : CG Modal LSTP-60-CDL-M / Havells /Bajaj

M&L for one coat of spray painting with approved tint of super enamel paint for ceiling fans including preparation of surface and filling the gaps with metal paste complete all as specified and directed.

M&L for down rod of 750 mm for ceiling fan complete all as specified and directed.

ESWAR ENTERPRISES

B DURGA REDDY INFRASTRUCTURES PRIVATE LIMITED

S R CONSTRUCTIONS

D P R ASSOCIATES

M/s SIRI CONSTRUCTIONS

RATNA ENTERPRISES