DEPOSIT-SITC of 160 KVA DG set at Govt. Homeopathic Medical College hospital campus, Iranimuttam, Thiruvananthapuram.- SITC of DG-General Electrical Work

Amount

SITC of 160 KVA DG set

OD140879/2022-2023:Supply, conveyance, Installation, testing & commissioning of 160 KVA Diesel Generator set with integral acoustic enclosure as per CPCB norms accessories as per technical details given below. 1. Engine : a) Make of Engine - Kirloskar/Cummins/ KOEL / Tata / KEL / Mahindra ) Type of Engine - Diesel Engine c) No. of Cylinders - As per manufactures standards. d) Method of Cooling - Water cooled with radiator. e) Design - Suitable for generating set operation 2.Standard accessories with Diesel Engine a) Fly wheel to suit flexible coupling b) Close Coupling c) Air cleaner d) Radiator with fan provided with fan guard. e) Fuel Pump f) Fuel filter g) Lubricating oil filter h) Exhaust silencer i) Exhaust Muffler j) Battery Charger/Generator 3. Engine Instrument Panel with the following items a) Starting switch with key or button b) Lubricating oil pressure gauge. c) Water temperature gauge. d) RPM Indicator with hour meter e) Battery charging Ammeter 4. Safety Controls for Engine a) Trip for low lubricating oil pressure b) Trip for high water temperature. 6. Brushless Alternator a) Make - Kirloskar/KEL//Stanford/Cummins) b) Type - Self exited and self regulated. c) Capacity - 160 KVA/128 K W @ 0.8PF d) System of Voltage - 3 phase, 415 V, e) Frequency - 50 Hz f) Insulation - Class F/H The Alternator should confirm to IS 4722. Operation and service manual, spares and tools shall be provided. 7. Fuel Tank Suitable size built in type integrated with the acoustic enclosure Fuel connection shall be done as per standards 8. Battery Suitable size built in type integrated battery with leads and terminals of appropriate AH capacity as per Manufactures requirement. Inbuilt solid state Battery charger, phase indication lamp for supply ON/OFF with HRC protection. standard control panel as per kerala Electrical Inspectorate requirements, with 250 A 4 pole MCCB and accessories such as Multi function meter and separate Energy meter etc.The AMF panel fabricated as a separate unit with 250A pole ATS with AMF relays, have sufficient space for glanding /clamping suitable cable rated for 160 KVA DG, Including inbuilt Battery charger)

OD140880/2022-2023:Supply and filling Diesel for DG set

90.12.6.34:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 185 sq mm

90.12.7.34:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.17.7.8:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.16.3.9:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.4.8:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

9.1.27:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD152269/2022-2023:Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel

OD152270/2022-2023:Supply and providing plate earthing with 1200x1200x12mm GI/CI earth plate, 50mm GI watering pipe, GI funnel with weld mesh, 25x3mm GI clamps, charcoal etc, including providing brick work masonry enclosure at top (450x450x450mm inside) including Gully trap with covering box in CI (450x450x10mm) but excluding earth continuity conductor and test joint as required.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

MAS ELECTRICALS

SYNERGY POWER TECH

Bidder Name

D SURESH

MAS ELECTRICALS

SYNERGY POWER TECH