REPAIRS, REPLACEMENT OF DIFFERENT TYPES OF LED LIGHT FITTINGS, SUBMAIN WIRING, MAINT REPAIRS TO LT PANELS AND ALLIED WORKS AT AF STATION BIDAR

Amount

M & L for preparation of old painted surfaces of LT panel size (1.0m,x1.0mx0.5m to 2.0x1.5mx0.8m) and applying spray painting with two coats of synthetic enamel paint over a coat of red oxide primer of existing color for outdoor/indoor panel board, outer & inner side and scraping out the old paint surfaces of existing panel boards complete all as directed by Engineer-in-charge including white wash to panel foundation/PCC base complete all as specified and directed.

Material and labour for disconnecting faulty/burnt end portion of cable by removing the cable from loop including necessary excavation & earth work, relaying and reconnecting the cable by removing faulty/burnt portion of incoming and out going cables at panel boards and preparing fresh terminals with suitable size of thimbles, lugs and glands or gland plates as suitable of any size and number of cables incoming out going to panel board`

M&L for Servicing ACB by taking out Air circuit breaker of capacity 400-1250 Amps from LT panels cleaning all parts internally and externally checking of the proper tension of mechanical springs and switching mechanism, tightening of connections of moving ,fixing contacts, floating contracts, servicing of motors and charging system and refixing it on its original position and testing of control wiring to operational complete all as specified and directed.

S&F in repairs of shutter assembly suitable for 3/4 pole ACB up to 630/800 Amps capacity complete all as specified and directed

S&F in repairs of arc chute (set of 3) suitable for 3/4 pole ACB up to 630/800 Amps capacity complete all as specified and directed

S&F in repairs of floating isolating contact (set of 3) suitable for 3/4 pole ACB up to 630/800 Amps capacity complete all as specified and directed

M&L for Disconnection and removing the unserviceable servo motor unit along with shaft from the existing servo stabilizers ( Oil/Air cooled ) carefully duly removing the top cover and disconnecting the connetions if required and replace servo motor unit with the identical equivalent servo controlling unit of same size and capacity along with shaft consisting of Reverseble synchronous motor with constant speed - Instant Start/Stop operates on single phase 230 V , 50Hz suitable for Voltage stabilizer of capacity 500 to 750 KVA(Oil Cooled)

All as per item No 8 above but of capacity 400 KVA

All as per item No 8 above but of capacity 300 KVA

All as per item No 8 above but of capacity 200 KVA

All as per item No 8 above but of capacity 125 KVA

All as per item No 8 above but of capacity 100 KVA

All as per item No 8 above but of capacity 50 KVA

Taking down carefully cables from servo voltage stabilizer/panel/transformer of different sizes for re use and re connect the same after making terminations by removing US lugs and provision of lugs,glands and thimbles and other connected accessories like nut bolts, washers and connectors complete all as specified. Note: rates deemed to incl in quoted rates Set of lugs,glands for one cable to both ends measured as one Job

M&L for jointing and connecting the cables from panel/transformer/servo voltgage stabilizer duly take care cable free from damages and laid the cables in provided cable duct/channels with proper alignment and gaping with one to another complete all as specified and directed.

Supply ,renewal / topping up of Transformer oil having di-electric strength not less than 60 KV/min instanteneous for olil cooled Isolation Transformers / Servo stabilizers complete all as directed by Engineer in charge . Make : Power oil / Servo /Veedol

M&L for Disconnection and Removing old unserviceable Battary charging unit and S & F Battery charging unit providing DC power supply to relays,meters etc. operates on 230 V Single Phase AC, Output 24 V DC for Auto synchronizing panel complete as required

M&L for Disconnection and Removing old unserviceable Battary charging unit and S & F Battery charging unit providing DC power supply to relays,meters etc. operates on 230 V Single Phase AC, Output 12 V DC for Auto synchronizing panel complete as required

S&F IGBT (Insulated gate bipolar transistor) inverter exhaust fan of capacity 170 Watt of 2280 mm sweep of 240 volt/50Hz 40 amps Model No R3G225-RE07-03 ebmpapst suitable for IGBT panel inside mount complete all as specified

M&L for Servicing of Automatic Power Factor Correction (APFC) panel of the capacity 100 to 125 kVAr complete comprising any type capacitors, APFC relay, MCCB, Cooling fan, Voltmeter, Ammeter, CTs with all other connected accessories, checking of serviceability of each component, cleaning all contact points, tightening of all connections including replacement of unserviceable components, thimbles, nut bolt and washers, etc if necessary, cleaning the entire panel by using hot blower complete all as directed by Engineer-in-Charge.

All as per item No.21 above but capacity 125 to 150 kVAr

All as per item No.21 above but capacity 150 to 200 kVAr

All as per item No.21 above but capacity 250 to 750 kVAr

Disconnection and removing the old unserviceable power factor capacitors from the APFC Panel and Supply and fix Power capacitor cylidrical type Resin filled heavy duty 440 V, 50 Hz ,AC having of capacity 10 KVAR capacities Make : L&T /Crompton / C & S

All as per item No.25 here in above but of capacity 15 KVAR, 440 V,Three phase

All as per item No.25 here in above but of capacity 25 KVAR, 440 V,Three phase

All as per item No.25 here in above but of capacity 50 KVAR, 440 V,Three phase

All as per item No.25 here in above but of capacity 100 KVAR with ssheet metal enclosure type Three phase

M&L for Disconnection and removing the cables from unserviceable servo volt stabilizer cleaning the stabilizer inside and out side duly removing the dust and foreign materials from oil chamber duly provn of auto regulator kit and chekcing the all terminations and connected devices like motor unit, relays, preventors replace the minor spares like indicators,gaskets/cork sheet,nut,bolt, terminals from the servo stabilizers ( Oil/Air cooled ) carefully and top up the oil as required. 230 V , 50Hz suitable for Voltage stabilizer of capacity 500 to 750 KVA(Oil Cooled)

All as per item No 30 above but of capacity 400 KVA

All as per item No 30 above but of capacity 300 KVA

All as per item No 30 above but of capacity 200 KVA

All as per item No 30 above but of capacity 125 KVA

All as per item No 30 above but of capacity 100 KVA

All as per item No 30 above but of capacity 50 KVA

Supply and fixing on load change over switches 4 pole in sheet steel enclosure of 160 amps complete all as specified and directed Make: Make-Indoasian or equivalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

All as per Ser Item No 37 but 250 Amps rating

All as per Ser Item No 37 but 200 Amps rating

All as per Ser Item No 37 but 400 Amps rating

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer/AMF panel of upto 750 KVA and S&F new main power contactor, coil voltage 240 volt comprising of all accessories suitable for 750 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer 400 KVA and S&F new power contactor 3 POLE MNX 325, coil voltage 240 volt comprising of all accessories suitable for 400 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer 300 KVA and S&F new power contactor 3 POLE MNX 265, coil voltage 240 volt comprising of all accessories suitable for 300 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer 200 KVA and S&F new power contactor 3 POLE MNX 225, coil voltage 240 volt comprising of all accessories suitable for 200 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer 125 KVA and S&F new power contactor 3 POLE MNX 95, coil voltage 240 volt comprising of all accessories suitable for 125 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Disconnection and removing the u/s Main contactor carefully from voltage stabilizer 100 KVA and S&F new power contactor 3 POLE MNX 80, coil voltage 240 volt comprising of all accessories suitable for 100 KVA voltage stabilizer. Make L&T or its equivalent Havells/C&S /standard.

Supply and fixing MCCB TPN/TP 315 Amps 415 Volts of braking capacity 36 KA of 3 pole confirming to complete taking down old unserviceable one and making necessary connections including all provisions for fixing in panel compartments as existing using necessary links of suitable metals and cleaning the terminals with CTC solutions complete all as specified and directed. Make : Havells/Legrand/Schneider/Standard

All as per Ser Item No 47 but 250 Amps with braking capacity 25 KA.

All as per Ser Item No 47 but 200 Amps with braking capacity 25 KA.

All as per Ser Item No 47 but 125 Amps with braking capacity 25 KA.

All as per Ser Item No 47 but 630 Amps with braking capacity 50 KA.

All as per Ser Item No 47 but 400 Amps with braking capacity 36 KA.

All as per Ser Item No 47 but 500 Amps with braking capacity 50 KA.

All as per Ser Item No 47 but 160 Amps with braking capacity 25 KA.

All as per Ser Item No 47 but 100 Amps with braking capacity 25 KA.

All as per Ser Item No 47 but 63 Amps with braking capacity 25 KA.

Supply and fixing MCB TPN 100 Amp, 10 KA 415 Volt in repair. Make : Havells/Legrand

Supply and fixing MCB TPN 63 Amp, 10 KA 415 Volt in repair. Make : Havells/Legrand

Disconnecting of LT supply and opening bus bar chamber/ cable box chamber of outdoor/indoor LT panel, removing of burnt out lugs,Lt switch gears/MCCB/MCB of any capacity and size and cleaning of bus bar and contact terminals with CTC solutions, insulating the bus bar by taping color codes and making connections complete with necessary nut,bolt,washeres,timbles and links of existing size and refixing all switchgears after repair/maint/servicing complete all as specified and directed.

Disconnection and removing the u/s PCB Unit from Servo stabilizer of capacity 750 KVA carefully and S&F new PCB unit complete of same size and capacity suitable for existing 750 KVA Servo Stabilizer all as specified and directed.

All as per item No 60 above but of capacity 400 KVA

All as per item No 60 above but of capacity 300 KVA

All as per item No 60 above but of capacity 200 KVA

All as per item No 60 above but of capacity 125 KVA

All as per item No 60 above but of capacity 100 KVA

All as per item No 60 above but of capacity 22.5 KVA

All as per item No 60 above but of capacity 10 KVA

M&L for Disconnection and Removing LT Cable connections from Isolation Transformer and transporting to the local work shop and removing the unserviceable / burnt out copper winding wire from the Isolation Transformer of capacity 400 KVA upto 750 KVA (oil cooled),Three Phase 415 V/415 V and rewinding the same with fine enamelled bare copper conductor of same gauge ,turns, and weight and having Class - H insulation level and keeping the core and windings into the hot air oven till the moisture evoporates and replace the same in its original position and testing complete by connecting existing LT cable connection all as directed by Engineer in Charge at site .Note: Rates Quoted deemed to be inclusive of all Misc items such as Cotton tape, warnishing,impregnated paper etc. for satisfactory completion of job.

All as per item No 68 herein above but of capacity 45 KVA to 300 KVA

M&L for repair/welding jointing of mild steel hinges and makem good of switch gear compartments and painting LT panel board shutters incl welding, riveting and make good the LT panel surround area to excavation and levelling complete all as specified and as directed.

S&F Indicating lamp 240 volts LED type with digital display of readings like voltage and amp complete all as specified and as directed by Engr-in-Charge.

Taking down existing unserviceable Various Recess mounted lighting fitting and fixtures and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling from any height so as to match with the existing finishes all as specified.

Taking down old unsv Bulb/tube rod of any type and removal of unserviceable material out of site all as specified

Taking down old unsv Tube Fitting/Decorative fitting/Batten of any type and removal of unserviceable material out of site all as specified

Taking down existing unserviceable Various Building security light fitting /Flood Light and fixtures and removal of unserviceable material out of site all as specified.

Taking down existing unserviceable Various Landscape light fitting / Fountain lights and fixtures and removal of unserviceable material out of site all as specified.

M/L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through on wall including PVC casing capping grade of size 25/20 mm, etc fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of pressed steel terminal box with 3 mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall complete all as specified and directed (a) one light point controlled by one switch

All as per item No 79 here-in-above but complete with 1100volt grade PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable through PVC casing capping medium grade of size 25/20 mm, etc fixed on wall/ceiling of suitable size and one run of 2.5 sqmm copper cable of upto earth dolly earthing for 15 Amps socket outlet independent Note :- 03 run of 2.5 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Material and labour for Sub main wiring of any type and size wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 2.5 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 2.5 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 03 run of 2.5 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 4.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 4.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 03 run of 4.0 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 2 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 6.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of one run of 6.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 03 run of 6.0 sqmm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Material and labour for Sub main wiring of any type and size and provision of new sub main wiring with 4 runs of single core PVC insulated unsheathed multistranded copper conductor cables FRLS of size 6.0 Sq mm drawn through and including PVC casing capping of suitable size with all necessary fittings and provn of two run of 6.0 sqmm PVC insulated unsheathed multistranded copper conductor double core cable as earth continuity conductor and connecting to common earth dolly all as specified. Note :- 06 run of 6.0 sqm including 01 run of PVC CASING CAPPING will be measured as one length complete all as specified and directed.

Supply and drawing in replacement with three Run of single core PVC 1.5 Sqmm copper wire in existing concealed conduit to made serviceable light point/fan/socket point as power earth and neutral complete and including taking out old aluminium / copper burnt wires all as specified and directed.( Note : Two run of single core PVC cable and one run of earth conductor shall be measured as one unit.)

Supply and Drawing in replacement with two Run of 2.5 Sqmm copper wire for phase & neutral & one run 2.5 sqmm for earth wire in existing concealed conduit to made serviceable power socket as power earth and neutral complete and including taking out old aluminium / copper burnt wires all as specified and directed.( Note : Two run of single core PVC cable and one run of earth conductor shall be measured as one unit.)

M & L for submain wiring complete with 1100 volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 04 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 4.0 sqmm PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :- 03 run of 04 sqmm including 01 run of PVC CONDUIT will be measured as one length complete all as specified and directed.

M & L for submain wiring complete with 1100 volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 6.0 sqmm PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :- 03 run of 06 sqmm including 01 run of PVC CONDUIT will be measured as one length complete all as specified and directed.

S & F LED Adore Lamp 0.5 W B22 Red lamp complete all as specified and as directed.Make Havells, Cat No: LHLDAFUEUPNX0X5or equivalent in Crompton or Bajaj

S&F of Lamp holder/angle holder, 230 Volts, PVC / Polycarbonate type, insulated body with black/white plate suitable for batten fittings complete all as specified and as directed.

S & F LED Adore Lamp 0.5 W B22 Green lamp complete all as specified and as directed.Make Havells, Cat No: LHLDAFUEUONX0X5or equivalent in Crompton or Bajaj

S & F LED 9 W INVERTER BULB B22 CDL complete all as specified and as directed.Make Havells, Cat No: LHLDAFUEUONX0X5or equivalent in Crompton or Bajaj

S & F wall mounted LED 18 watts, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting for LED tube 4'' x 18 watts complete including dismantling the existing unserviceable fitting, complete all as specified and as directed. MODEL- REGALBATTENT8,Make:-Havells or equivalent in Crompton and Bajaj

S & F wall mounted LED 18 watts, 4 feet, Industrial Batten slim type (Daylight 5000K) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fittingcomplete including dismantling the existing unserviceable fitting, complete all as specified and as directed.Model-LUMLINENEO Make:-Havells or equivalent in Crompton and Bajaj

S & F wall mounted LED 18 watts, 4 feet, of colour temperature 2700 K (warm white), Industrial Batten slim type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting complete including dismantling the existing unserviceable fitting, complete all as specified and as directed. Model-LUMLINENEO Make:-Havells or equivalent in Crompton and Bajaj

S & F Ultra bright LED T8 Tubelight 18 watts (single side connection) with very high efficacy with built in driver with metal Heat sink suited for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting complete all as specified and as directed.Model-CRYSTALT8 Make:-Havells or equivalent in Crompton and Bajaj

S&F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provosion of LED bulb 09/10 watts complete incl removal of old unsv fitting all as specified and as directed. Make:-Havells or equivalent in Crompton and Philips

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with Silica filled driver for wet protection along with SPD Protection, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completewatts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting in flexible conduit and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape fitted with clamp complete incl removal of old unsv fitting all as directed by Engineer-in-Charge. Make: Havells, Crompton and Bajaj

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable sizeall as directed by Engineer-in-Charge.Make:-Havells or equivalent in Crompton and Bajaj

Taking down the existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. Note : Earthwork will be measured and paid seperately.

Relaying Faulty LT UG XLPE cable of size 2 core x 6 sq mm laid in trenches/ floors/ on wall/ service connections after cutting and jointing through Cable Joint kit as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply & laying incl replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 6 Sqmm 2 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable complete all as specified and directed.

Returning, filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point.

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified. NOTE :- Punned thickness only will be measured and paid.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

S&F Water /Weather Proof Pole/Pipe/wall mounted, rustfree, withstand solar radiation and heavy rain, maintenance free, SMC moulded Service connection boxes IP 54, Dimensions 350 x220 x 150 mm ,double hinged ,incl clamping of distribution boxes and MCB of 06-32 Amps, complete all as per specified and directed.Make: Syntax or HENSEL or equivalent make.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate for pole and Panel/Busbar Panel foundation complete all as directed

S & F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 10 Sqmm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm supension wire , twin core cable flat or circular cable incl taking down old unsv cable complete all as specified and directed .

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.Make: Havells/Bajaj/Crompton

Supply and fixing LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.Make: Havells/Bajaj/Crompton

S & F in replacement recess mounted 4x1 feet LED flat panel which provides soft-light and glare free symmetrical ilumination 36 /42 watt 6 k led incl electronic driver cutting of false ceiling sheet of required size complete all as specified and directed

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: Havells/Bajaj/Crompton

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: Havells/Bajaj/Crompton

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.Make: Havells/Bajaj/Crompton

S & F Recess mounted Environmental friendly ,asthetically designed ,high performance, Square shape (1 x 1) back lit downlighter 18W in roboust PDC aluminium housing with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge.Model:- SLE DLR 10W STELLAR PRO SQ XX (Stellar Pro), Make:Havells or equivalent in Bajaj and Crompton.

S & F IP 65 Rated LED Bollard light 8W/10W , provision of new 3 core multistranded copper conductor of size 23/0.193 from control DB to fitting including suitable LED Driver complete all as directed by Engineer-in-Charge.Model- BAMBOOBLS8WLED830PSYMTOPC, Make:Havells or equivalent in Crompton and Bajaj.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as directed by Engineer-in-Charge. Make:Havells or equivalent in Crompton and Bajaj.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as directed by Engineer-in-Charge. Make:Havells or equivalent in Crompton and Bajaj.

Supply and fix Recess mounting LED spot light 12 watt, 240 volt,with high efficiency of 140 lm/W complete with electronic driver with all accessories intenally prewired and necessary mounting arrangements, provision of new 3 core multi-stranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-charge. Model No - BRDCSL 30W NW/WH/WW of make - Bajaj or equivalent item of make Havells/Philips as approved by GE.

Supply and fix AL PDC Housing integrated LED Flameproof Wellglass & Highbay Luminaire with heat resistant toughened glass. IP66 Protection rating & suitable for Zone 1 & 2 and Gas / Vapour group IIA, IIB & IIC. T6 Temperature class compatible all as specified and as directed.Model No - BIFPWG 30W CLED SD of make:Bajaj or equivalent item of make Havells/Philips as approved by GE.

Supply and fixing LED light fitting 2x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with threecore flexible copper conductor cable with suitable size all as specified and as directed by Engineer-in-charge.

Supply and fix Recess mounting LED adjustable light intensity with dimmer switch tunable from 2700 to 6500K from warm white to cool white to cool daylight without remote control, 9 watt, 240 volt, complete with electronic driver with all accessories intenally prewired and necessary mounting arrangements, provision of new 3 core multi-stranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-charge. Model No - 59061 of make - Philips or equivalent item of make Havells/Bajaj as approved by GE.Make- Bajaj/ Crompton/ havells

S&F LED Driver 12/15W ,DC out,incl taking down unsv Signage/Display board light fitting , all as per sample complete all as specified and directed. Make- Bajaj/ Crompton/ havells

S&F LED Strip light 12/15W ,DC out,incl taking down unsv Signage/Display board LED Strip , all as per sample complete all as specified and directed. Make- Bajaj/ Crompton/ havells

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 50 watts with pre wired and necessary mounting arrangement with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 2.5 sq mm three core flexable aluminium conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as directed by Engineer- in-charge. Make Havells catpart No. JETAADORFLS50WLED or equivalent make of Crompton/Bajaj.

All as per Item No 40 above but presure die cast aluminium IP 66 Flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts complete all as specified and directed.Make Havells catpart No. JETAADORFLS30WLED or equivalent make of Crompton/Bajaj.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge. Make Havells catpart No. ENDURAOMNIOLUSSL120WLED or equivalent make of Crompton/Bajaj.

Supply and fixing LED light fitting 2 x 16 watt Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectionwith die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with threecore flexible copper conductor cable with suitable size all as specified and as directed.

Supply and fix Switch flame proof rotary type with termination box in LM 6, 16 Amps, single pole 250V complete all as specified and as directed

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and as directed.

S&F Submersible Fountain lights R/G/B type complete with fixing arrangements with nuts and Bolt complete all as specified and directed.Make: Havells, Crompton and Bajaj

Siddique constructions (BID ID -3252478)

Srinivash Engineers (BID ID -3251157)