KMC/S_D/KGPS-41/24-25

Amount

Supplying of Swaged Steel Tubular pole of following designation and dimensions. 410 SP-53 ; 11.0 Mtr., 183.00 Kg. (Outside dia & thickness given in IS 2713, Pt. II, 1980 )

Erection of Single Steel tubular pole with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts.above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. Size 0.6x0.6x1.91 mts

Providing CC (6:3:1) muffing 450x450x600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary (a) Without Loop Box

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts,double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Above 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of (approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Above 9.0 mtr. long pole. (ii) 2nd coat of aluminium paint over 1st coat.

Supply and fixing of pole head type M.S loop box (3mm thick) with connecting bar and other accessories fixed on the top the pole as required as per direction of EIC (For 3 phase 4 wire connection).

Supply & Fixing arm bracket of 50 mm bore tubular Pipe (M.S.) of 1.5 m length for fixing on 75 mm /100 mm dia pole top including Supply & Fixing 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work including painting the same with one coat of red oxide primer and two coats of Aluminium paints.

Supply, hoisting , fixing & commissioning of LED Flood Light Luminaire made of pressure die-cast housing & toughened glass , individual LEDs with secondary lens optics, System Power: 180 watt, IP Class: 66 & Impact resistance of IK07 , complete with all accessories on pole. Make : Philips / Bajaj / Magik / Wipro / Simoco / Syska or any reputed make of similar specifications.

Supply of 10 sqmm x 2 core PVC insulated unarmoured sheathed aluminiun conductor cable (1.1 KV grade) make Gloster/ incab/ Mescab/ Polycab/ Havells / Finolex)

Supply of 35 sq mm X 4 core PVC insulated unarmoured sheathed aluminiun conductor cable (1.1 KV grade) make Gloster/ incab/ Mescab/ Polycab/ Havells / Finolex)

Supplying & drawing 3x36/0.3 (2.5 sqmm) 1.1 KV grade single core stranded FR PVC insulated & unsheathed single core stranded copper wire (brand appvd, by EIC) in prelaid polythene pipe and by the prelaid GI fish wire and making necessary connection as required.

Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing.

Drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing Galvanized stranded wire for centenary system with reel insulators and binding wires.

Laying of cable 4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

Supply and fixing straining screws of (300mm x16 mm dia) with 2 nos 200 mm long angle iron / pole clamp to be fixed on wall / pole for catenary syatem of wiring .

Supplying and erection of Galv, D-iron complete with suitable pole clamp 100 mm x114 mm porcelain shackle insulator & 19mm dia Glav, bolts and nuts including painting.

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chamber on angle iron frame on wall , of 4 bars , 415 V, 63 A Dimension of Al. bars [85mm long] : 4 x 20x5mm , Dimension of Sheet Metal Box 500x150 mm with necessary connection with brass bolts , nuts , insulator etc. incl. earthing attachment and painting as required.

Supplying & erection of medium size feeder piller box of size (1200mmx750mm x450mm) made up of 2mm thick MS plate along with suitable MS angle. The P.B have double hinge door at the front and back with suitable locking & louver arrangement. The box will be painted by 2 coats of aluminium paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of timer unit, fuse unit, & other accessories. Leg of the piller box will be 900mm in length made up of (35mmx35mm) MS angle with sutiable base plate. Legs of the piller box will be erected at 300mm below the ground level with cement concret (1:2;4).

Supplying and fixing 240/415 V 6-32A , DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Havells or any reputed make).

Supplying and fixing 240/415 V 6-32A , FP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Havells or any reputed make).

Supplying and fixing 100A , 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection.

Supplying and fixing 63A , 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm in pillar box.

Dismantling steel tubular pole embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km.

Supply & fixing of composite unit comprising of 1 no. 3 pole control contractor (type ML4 , L&T make) and 1 no. time switch of daily dial (FM1/ Quartz daily , L&T make) enclosed in a box of size 450mmx 350mmx150mm made and fabricated from 16 SWG MS sheet including front cover having opening arrangement operated by toggle switch of 5A capacity for Auto and Manual operation including supplying and wiring with 6 sqmm amd 1.5 sqmm PVC copper wire and supply of 2A HRC fuse complete with base and making necessary connection with adhesive tape, lug, washer etc, as required and as per direction of EIC.

Fitting & fixing of components (mccb , mcb, timer unit , fuse etc.) inside the pillar box including connection with the busbar and earthing attachment with necessary tools & tackles by engaging skilled electrician and checking & testing of the components after completion of its wiring as per direction of EIC.

POWER INDIA (BID ID -5826529)

STAR ENTERPRISE (BID ID -5832792)