REPAIR TO DRAIN, FENCING, COMPOUND WALL, SECURITY WALL, PATH, HARDSTANDING ETC IN THE AREA UNDER AGE B/R-I AT CLEMENT TOWN, DEHRADUN

Amount

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Dismantling posts or struts from natural ground (wood, steel, or RCC) any section, including taking out embedded portion and making good disturbed ground

Dismantling fencing wire/ mesh any type

Dismantling wrought iron or mild steel work of any description.

Dismantling timber scantling 40 Sqcm and over in section in framed work complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L half brick thick brick work with sub class "B" old size bricks in cement mortar (1:4), straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L 15mm thick rendering cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

Excavating in post holes (or similar holes) any type of soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreadiing, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated surplus soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point as in soils.

Providing cement concrete type B1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; eismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs in, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone agg) as in Foundation, filling and mass concrete complete all as specified and directed.

M & L Cement concrete type B2, 1:2:4 (40MM graded aggregate) for surface channels and drains complete all as specified.

M&L for reinforced concrete pipes class NP-3 laid and jointed complete witth collar of 300mm bore under road crossing complete all as specified & directed.

M & L Cement concrete 1:3:6 type C2 concrete bed to 300mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.

S & F rolled mild steel Fe=410-W (Gde-250) quality in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) , bars including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

S&F in repair 1.5mm thick fibre glass reinforced plain transculant sheet any colour as approved and fixed to framing complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut nexc 10cm long and diameter of neck 11 to 15mm.

Supply only galvanized iron chain link fencing of any size as directed of any dia of wire complete all as specified.

Fixing only chain link fencing of any size to post or frame complete all as specified and directed.

S&F MS round bar 10mm dia as in supporting of vertical fencing hooking ends and binding complete.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 50mm thick PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in hardstanding , laid in panels, finished the top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 50mm thick PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 100mm thick PCC (1:2:4) type B-2 (Using 40mm graded stone aggregate) as in hardstanding , laid in panels, finished the top surfaces even and smooth without using extra cement complete all as specified and directed.

M & L 18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

M&L dura stone tiles approved make of size 300x300x8mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 80mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed.Make ferocon/ jain tiles industries haldwani/nitco

M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed.Make- ferocon/jain tile industries/nitco

M & L Pre polished Chequered cement concrete coloured tiles 300 x 300 x 25mm thick over and including 15mm thick screed bed in Cement mortar (1:4), set jointed and pointed in cement slurry in floor finished with grey cement and pigment. Make-nitco, ferocon, jain tiles industries

M&L precast cement concrete, louvers and jallies, 35mm thick (measured solid) fancy type 1:2:4 type B-0 (Using 12.50mm graded stone aggregate) set in CM (1:4) including, all moulding but excluding frame complete all as specified and directed.

M&L type B-1 (1:2:4 ( using 20mm graded aggregate) as in precast ce- ment concrete in window or door cills,kerb stone, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. set in cement mortar 1:6 complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out any type of soil

M & L hard core broken stone boulders gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

supplied and fixed Welded steel wire fabric weight n exc 4kg/sqm complete to wood or steel members

Providing reinforced cement concrete B1, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing average area n exc 100 sq cm, with or without chamfered angles

M & L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips

all as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for three coats of white wash to newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coat of synthetic enamel paint over a coat of red oxide or zinc chrome

M&L for preparation of newly plastered Or concrete surfaces of walls and applying two coats of weather proof exterior emulsion paint over a coat of primer on wall surfaces complete all as specified and directed

M&L Preapration of old surafces of walls, concrete tiles, kerb stone and the like and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.

M&L Preparation old treated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L Preparation old treated surfaces of walls and applying one coat of Colour wash complete all as specified and directed.

M&L Preapration of old surafces of walls and applying one coat of cement base paint complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Nijamudin & Sons

Alankar Traders

Saurav Enterprises

M/S IRFAN AHMAD CONTRACTOR

BHAGAT JI ENTERPRISES

High Tech Metal India

M.K Engineers