Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
| 2 | Accepted-Technical GOVT CONTRACTOR DISTT CHAMBA HP 176303 | CHAMBA | HIMACHAL PRADESH | 176303 | Accepted-Technical Fulfil eligibility Ceriteria |
| 3 | Accepted-Technical RAJINDER KUMAR | CENTRAL DELHI | DELHI | 110054 | Accepted-Technical Fulfil eligibility Ceriteria |
Tender Value
₹2.4 L
EMD Value
₹4,865
Closing Date
3 Feb 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Baijnath District Kangra HP
Construction of RCC Head weir and intake chamber at Source Rajehar Nallah
2026_HPIPH_126582_1
13696-90 dated 23-01-2026
Open Tender
Civil Works - Roads
Item Rate
90 days
Baijnath
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Executive Engineer
₹4,865
4 Feb 2026
23 Jan 2026
4 Feb 2026
23 Jan 2026
3 Feb 2026
23 Jan 2026
Excavation in foundation trenches etc. in all kinds of soil such as pick jumper work blasting soft or hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
Providing and laying cement concrete 1:3:6 (One cement is to three sand is to six graded stone aggregate 40 milimetre nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
Providing form work with steel plates 3.15 milimetre thick welded with angle iron in frame 30x30x5 milimetre so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens ballies,height of propping and centring below supporting floor two ceiling not exceeding 4 metre and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
Vertical surfaces such as walls(any thickness)partitions walls and the like including attached pillasters,buttreses plinth string courses and the like within all leads and lifts as per the direction of Engineer-in-charge.
Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
Providing and fixing Tor Steel reinforcement for RCC work including in including bending , binding and placing in position complete upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
Providing and laying cement concrete 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work in foundation and plinth in all lends and lifts
Foundation, footing, bases of columns and the like & mass concrete.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge.
Wall any thickness but not less than 0.10 mtr. Thickness attached pilasters, buttresses, plinth and aring courses ex fre top of foundatio level upto floor two level, complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge.
Suspended floors,roofs landing shelves and their supports balconies beams,girders and cantilevers upto floor two level complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
Providing & fixing of M.S. man hole cover of 500 mm dia size made of M.S. Sheet 2.0 mm thick with M.S. angle 35x35x5mm thick with hinges one side and sliding door bolt for locking arrangement i/c cutting, welding and priming & Painting two coats of anamel paint sky complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
Form_6.pdf
Tender Documents • 0.26 MB
Form_8.pdf
Tender Documents • 0.79 MB
BOQ_186710.xls
BOQ • 0.30 MB
TC.pdf
Tender Documents • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .