Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹14.2 L
EMD Value
₹30,000
Closing Date
21 Jun 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
Srikanth AE
Maintenance
KNNL/2023-24/DA/WORK_INDENT441/CALL-3
KNNL/2023-24/DA/WORK_INDENT441/CALL-3
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KNNL Division IPC Div No 1 Kalaburagi
14 documents required · 14 mandatory
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
₹500
₹30,000
13 Jun 2024
13 Jun 2024
24 Jun 2024
17 Jun 2024
Maintenance to Gandorinala Dam & Repairs to Escape/Regulator at 10.030 Km of LBC of GNP.
Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease etc., by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaff...
Cleaning gates / hoists / embedded parts to expose fresh metal surface for repainting by sand blasting method as specifications including coat of rust inhibitive compound etc,. Complete with all lead ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Supplying and fixing bulb type uncladded rubber seals and hot dipped G.I Bolts /Nuts/washers of approved quality including cost of all materials , Labour , removing existing worn out / damaged bulb ty...
Supplying and fixing flate rubber seals and hot dipped G.I Bolts /Nuts/washers of approved quality including cost of all materials, Labour, removing existing worn out / damaged bulb type rubber seals ...
Porviding and applying grease of approved quality to gates and hoist components requiring greaseing as part of the annual maintenance using grease gun wherever necessary including cost of all meterial...
Providing and filling / replacing gear oil of approved quality upto the required gauge level for Radicon Gear unit of hoists / gantry cranes including cost of all materials, machinery, labour etc., co...
Struct. steel Fabricator /Marker /Erector
Helper Core drilling machine
Canal sluice operator
Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all lead and all lifts. (WRD DSR 2021-22 Vol-IV P.No.88 I.No. 7.3 )
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such similar works in all kinds of soils , as per drawing and te...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Providing and laying in position plain cement concrete 1:3:6 (M10) using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt...
Providing and laying in position reinforced cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all sub-structures of building, irrigation works, bridges, drai...
Providing and laying in position reinforced cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all sub-structures of building, irrigation works, bridges, drai...
Providing and laying in position reinforced cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all sub-structures of building, irrigation works, bridges, drai...
Providing and laying in position reinforced cement concrete M20 design mix using 20 mm nominal size graded crushed coarse aggregates for all super-structures of building, road, water, irrigation & sup...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for RCC work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent m...
Providing brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 Liter10 m over and including priming coat of exterior primer applied @ 2.20 kg/10 m) with paint o...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Notification 11.06.2024.doc
Others - Tender notification • 0.21 MB
DTP Gate work Kw-1 INno-441 Call 3.doc
Tender Document • 1.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .