SPECIAL REPAIR OF SECURITY FENCING AND CERTAIN OTHER EM REVENUE AND MINOR WORKS UNDER GE NORTH BINNAGURI

Amount

SCHEDULE A CIVIL WORKS Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete , brick work , including taking out embedded portion and making good disturbed ground complete all as specified. ( Note :- the vertical height above GL shall be measured for the purpose of payment towards work done)

Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keeping serviceable wire for reused in safe custody all as directed.

Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 M complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Supplying only chain link fencing of MS galvanised wire (Hot dipped galvanised), not less than 3 Kg/sqm , of any mesh size and to any type of standards , rails , straining bolts, etc. including provision of binding wire complete all as specified.

Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.

Material and labour for Mild steel bars round bar 10mm dia. and over cut to length, bent to shape required,as in fixing of the chain link fence with fencing post including jointing ends of bars by welding, complete all as specified.

Material and labour for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long and 5 to 10 mm dia. of shank complete all as specified.

Material and labour for Mild steel Galvanised, (hot dipped galvanised) 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of under ground electric cable / pole etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m in depth but not exceeding 3.00 m in depth ; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of under ground electric cable / pole etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:4 complete all as specified.

M&L for providing cement concerete PCC 1:2:4, type B0 (using 12.5mm grade crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic bands and other similar bands , plinth courses, string cources, lacing cources, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for water toughs and the like including weathering, slightly rounded or chamfered angles and throating with necessary finishes complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new plastered or unplastered surafces of wall and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

EXTERNAL ELECTRIFICATION Material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 SP-31, 9.0 metres long including painting all external exposed steel surfaces with two coats of aliminium paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bitumenous paint complete all as specified and as directed.

Material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 SP-22, 8.50 metres long including painting all external exposed steel surfaces with two coats of aliminium paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bitumenous paint complete all as specified and as directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, two or more core, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 10 Sqmm 4 Core sizes ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items )

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, two or more core, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 10 Sqmm 2 Core sizes ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items )

Supply and fixing 60 watts LED street light luminaire with high power LED and unique peanut lens to ensure uniform light distribution ,higher spacing between poles and maintence free system of not less than 60 Watts IP 66 type incl standard fittings pressure die cast aluminium housing with heat reistant toughened glass with epoxy powder coated finsh complete with Electronic driver, Surge protector not less than 5 KV and all accessories duly prewired complete all as specified.

Supply and fixing 30 watts LED street light luminaire new generation energy savings and environmental friendly high power long life LED and unique peanut lens to ensure uniform light distribution ,higher spacing between poles and maintence free system of not less than 30 Watts IP 66 type incl standard fittings pressure die cast aluminium housing with heat reistant toughened glass with epoxy powder coated finsh complete with Electronic driver, Surge protector not less than 5 KV and all accessories duly prewired complete all as specified.

Supply and fixing 50 watts LED street light luminaire new generation energy savings and environmental friendly high power long life LED and unique peanut lens to ensure uniform light distribution ,higher spacing between poles and maintence free system of not less than 50 Watts IP 66 type incl standard fittings pressure die cast aluminium housing with heat reistant toughened glass with epoxy powder coated finsh complete with Electronic driver, Surge protector not less than 5 KV and all accessories duly prewired complete all as specified.

Supply & fixing pole junction box (Loop IN Loop OUT) of size 250mm x 190mm x 150mm , made out of 2.00 mm CRCA sheet CPRI approved factory made, weather, dust & vermin proof with front door and suitable locking arragement including applying two coats of Powder coated paint over exposed external & internal surfaces with three phase and neutral busbar of size 20x3 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and one no SP 6 Amps ‘C’ series mounted on DIN rail including dismantling / taking out old unserviceable any type of busbar box from existing position all complete as specified and directed. (Note :- Making suitable nitch to taking out the junction box from existing position and cutting the existing pole foundation and making good disturbed surface with required PCC /Plaster work and the same shall deem to be included in the unit rate.)

Supply and fixing in repairs street light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in repairs street light bracket made out of GI pipe light grade 40 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for one run of 1.5 sqmm 3 core PVC sheathed multi stranded aluminium conductor cable LT 1100 volts confirming to IS 7098 FRLS (inner sheets) in existing position from pole to junction box to light fittings complete all as specified.

Supply & fixed unplastiiced PVC pipes of pressure rating 10 Kgf/cm sq of 20 mm bore and 3 mm thick fixed with MS flat iron clamp of size 20 x 3 mm in every 1.5 m length of pipe including taking doen old unservicebale of any size and type complete all as specified.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete for pole foundation and finishing the surface ecven & smooth withouit using extra cement including necessary form work complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations/mass concrete for pole foundation/ coping and stay and finishing the surface ecven & smooth withouit using extra cement including necessary form work complete all as specified.

Supply and fixed in repairs MCB TPN 32 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supplying and fixing 40 mm bore dia galvanised mild steel pipe /tubing, light grade complete with all fittings, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note :- Excavation & Earth work shall be measured and paid separately)

INTERNAL ELECTRIFICATION Material & Labour for concealed point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust point controlled by one 5 Amps one way switch complete all as specified and as directed for light /fan point controlled by one way switch 5/6 amps. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC complete all as specified.

Supply and fixing exhaust fan 300 mm sweep steel body with and including MS louvers 900 rpm 50 Hz 230 volts AC, heavy duty , including cutting opening of wall and fixing exhaust fan and making good distrubed surfaces complete all as specified.

Supply and fixing exhaust fan 450 mm sweep steel body with and including MS louvers 900 rpm 50 Hz 230 volts AC, heavy duty , including cutting opening of wall and fixing exhaust fan and making good distrubed surfaces complete all as specified.

Shri Amarnath Sah

Ms Singh Co