RequiredExperience with Government
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No Foam Based Wheeled Fire Extinguishers ( 14 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Water cum Foam based wheeled fire extinguishers Conforming to IS 16018 latest * Water-based extinguishers Nominal Charges Content capacity 45 45.0 Extinguishing Medium Water and AFFF foam mixture * 1/5 AFFF Foam Specification AFFF Concentrate to IS : 4989 part IV latest * Type of Foam Concentrate Type 6 — To be used with 94 percent water and 6 percent concentrates * Propellants Type ISI marked propellant gas cartridges to IS 4947 * Propellant for stored- pressure and cartridge operated wheeled fire extinguishers Carbon dioxide * Internal CO2 Cartridge capacity as per IS:4947 300 gm * External gas cartridge capacity NA * Suitably for the Class "A/B/C/D" of Fire - * Constructional Cylinder Pressure Type Low Pressure Cylinders (service pressure less than 2.5 M * Cylinder Material Low Carbon Steel conforming to IS:513 contain a maximum of 0.25 percent carbon
Required0.05 percent sulphur and 0.05 percent phosphorus. Low Carbon Steel conforming to IS:513 contain a maximum of 0.25 percent carbon
Required0.05 percent sulphur and 0.05 percent phosphorus. Rechargeable Yes * Constructional requirements of complete fire extinguisher as per clause 8 of IS :16018 * Discharge Assembly Hose at least 4.0 m long and a shut-off nozzle at the end of the hose * Wheeled Carriage Assembly yes
Requiredas per clause 8.18 of IS 16018 * Total mass of a fully charged wheeled fire extinguisher(without trolley and trailer) 68 * Durability of fully charged wheeled fire extinguisher as per clause 6.7 of IS 16018 * Electrical Conductivity of Extinguisher No * 2/5 Discharge as per clause 6 of IS 16018 Colour for wheeled fire extinguisher bodies Red * Performance Discharge Capacity minimum 85 percent by mass of the actual rated capacity of the extinguisher
Requiredwhen the extinguisher is set into operation under normal temperature conditions of 27° C ± 5°C * Operating Temperature +5°C to +55°C +5°C to +55°C
Required–5°C to +55°C Effective Discharge Time not less than 40 s and not more than 210 s. * Bulk range throw of wheeled fire extinguishers with a Class A rating 10 * Duration of Discharge wrt capacity 120 * Maximum service pressure (PMS) 15 * Minimum Bursting Pressure 65 * Certification Marking as per clause 9.2 of ISS * BIS Certification Marking Yes * CM/L Number - * Availability of Test Report from Central Govt/NABL/ILAC acredited lab to prove conformity to specification Yes * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Test Report to be provided to the buyer on demand Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.