CONSTRUCTION OF VOCATIONAL LAB AT KV NO 2 UNDER GE ND VISAKHAPATNAM

Amount

SCHEDULE 'A' PART-I [B/R Works]: Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil

Excavation in trenches not exc 1.5m wide and depth for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide, exc 1.5m but not exc 3.0m in depth and for foundations, laying of cables, pipe etc n.exc 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Removing excavated material /soil to a distance exc 1.5 Km but not exceeding 5.0 Km and depositing where directed complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. (Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.)

M & L for PCC 1:48, type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified.

Use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of plinth beams and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of steel formwork to sides of pillars, posts, columns and similar work for fair finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

Use and waste of steel formwork to challah hoods, chajjas and similar work rough finished surfaces of concrete flat complete all as specified and directed.

Use and waste of steel formwork to sides and soffits of floor or roof beams, lintels and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of steel formwork to soffits of suspended slabs including edges of concrete slabs rough finished surfaces of concrete flat complete all as specified and directed.

M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in foundations, rafts, footings, plinth beams, basement slabs etc complete all as specified and directed.

M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for mild steel TMT bars 5mm dia and over upto 10mm dia as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers, binders complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry in PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) with solid blocks, exc 10cm in width and setting in mortar 1:6, complete all as specified and directed

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces duly mixed with and including water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over suitable thickness of wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces by using vaccume based sanding machine and applying two coats of Plastic emulsion paint by using auto roller/airless sprayer, over a coat of alkali resistant primer over suitable thickness of wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M & L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/10sqm including over suitable thickness of wall care putty complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as directed.

M & L for 50mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring / plinth protection including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 40mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in floors, and finishing the surfaces complete all as specified and directed.

M & L for 100mm thick, PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base of flooring / hard standing finishing the surfaces even and fair complete all as specified and directed.

M & L for double charged vitrified coloured ceramic tiles 10mm thick (square/rectangular), area of each tile exceeding 0.42 Sqm but not exceeding 1.0 Sqm, as in floors set and jointed neat with epoxy grout and masking tape shall be put before putting the epoxy grout, grout shall be througly cleaned immediatlely and pointed in white or coloured to match the shade of the tile and laid over and including screed bed or bedding layer in CM 1:6, 15 mm thick complete all as specified and as directed.

M & L for coloured Glazed ceramic tiles of size 450 x 300 x 7 to 8mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for brushing cleaned roof surfaces with neat cement slurry @3kg/ Sqm and applying 10mm thick cement screed in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement and applying polymeric water proofing membrane APP based of weight not less than 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm) laid on primer by forced application including applying evenly a tack coat of of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm at the bottom and another coat at top of the membrane and finally finished with one coat of bitumineous aluminium primer at 100 grams/Sqm complete all as specified and directed.

S & F 50mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., complete all as specified and as directed.

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in floors complete all as specified and as directed.

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in floors complete all as specified and as directed.

S & F 100/75mm dia outlet PVC [SWR] Floor/Nahani Trap with grating including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with Access Door including jointing with solvent cement complete all as specified and as directed.

S & F 75mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F CPVC Pipes 20 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, complete all as specified and as directed. [Note: Quoted rate is deemed to include for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 wherever required as per site condition]

S & F CPVC Pipes 25 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, complete all as specified and as directed. [Note: Quoted rate is deemed to include for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 wherever required as per site condition]

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including 20mm bore PTMT ball valve high pressure complete all as specified and directed.

S & F in repairs 15mm bore bib tap fancy type Chromium plated capstan head, screwed down, screwed for 15mm dia bore iron pipe complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-CHR-5041N or its equivalent]

S & F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PVC flexible waste pipe 32/40mm dia with socket 100cm long complete all as directed

S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F Chromium plated Towel rail, 60cm long between flanges complete all as directed. [Make shall be Jaquar of Cat No. ACN-1111SM or its equivalent]

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, with decorative face veneers on both faces with lipping to match complete all as specified and as directed.

M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F mild steel work as in Bands, straps, hold fasts, stiffners for fencing posts, struts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in roof kerb Coping, benching, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed.

S & F300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S & F Brass barrel Tower Bolt of size 200 mm size with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed.

S & F Butt hinges, 125mm size extruded brass, medium weight complete all as specified and directed.

S & F Brass handles fabricated type of size 150 mm complete all as directed.

S & F Brass cup board lock 75mm size, 4 levers with duplicate keys

M & L for 18mm thick Prelaminated particle board, interior grade, prelaminated two side with decorative choice lamination on both sides, as in kitchen cup boards with suitable fixing arrangement complete all as directed

M & L for 1st class hard wood Plain fillets. square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge or face of sectional area of fillet not exc 6 Sqcm complete all as directed

S & F Brass handles fabricated type of size 100 mm complete all as directed.

S & F magnetic catch for cupboard complete all as specified and directed

S & F stainless steel curtain rod 25mm dia (SS-304) thickness not less than 0.8mm including fixing with suitable SS brackets, fancy type designer knobs matching with curtain rod complete all as specified. [Note: Quoted rate is inclusive for providing additional bracket if length of curtain rail exceeds 1.2m long]

S & F Continuous (piano) hinges, Brass width of flap 40mm (when open)

S & F floor door stopper of Brass body and tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M & L for providing and injecting emulsion for Pre construction anti-termite, treating top surface of filled earth using emulsion CHLOROPHYRIFOS 20 EC at 1% concentration at the rate of 5 litres of emulsion per square metre complete all as specified and directed by Engineer-in-Charge.

M & L for providing and injecting chemical emulsion for pre construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at 2.25 litres per linear running metre including drilling and plugging holes with cement mortar (1:2) to match with the existing surface complete all as specified and directed by Engineer-in-Charge.

M & L for providing and injecting chemical emulsion for anti-termite treatment at points of contact of wood work by chemical emulsion CHLOROPYRIFOS 20 EC at 1% concentration at the rate of 0.5 litre per each hole by drilling 6mm dia holes at a downward angle of 45 Degree at 150mm centre to centre complete all as specified and directed by Engineer-in-Charge.

M & L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge.

M & L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed

S & F powder coated aluminium grill of approved design / pattern with approved standard section and fixed to the existing window frame with CP brass / stainless ateel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as directed by the Engineer-in-Charge.

S & F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane fixed to aluminium windows complete all as specified and directed.

S & F 5.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane fixed to aluminium windows complete all as specified and directed.

S & F Steel cupboard shutters Godrej pattern with double shutters including frame made of 1mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and locking arrangement and applying two coats of spray painting over primer over metal putty fixed to the existing concrete wall complete all as directed by the Engineer-in-Charge. [Note: Approximate size of the cupboard 90cmx190cm. Measurement shall be made in Sqm including frame]

S & F Steel cupboard shelves Godrej pattern made of 1mm thick MS sheet including stiffeners, moulding, bending, welding, necessary fittings and locking arrangement and applying two coats of spray painting over primer over metal putty fixed to the existing concrete wall complete all as directed by the Engineer-in-Charge.

M & L for Cement concrete chequered tiles 30cm x 30cm x 20mm thick, with grey cement and no pigment machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L 18-20MM Granite (of any type) work (table rubbed and polished) in flooring, window cills, steps, screed bed bedding layer, 15 mm thick in cement mortar 1:4 complete all as specified and directed.

SCHEDULE 'A' PART-II [E/M Works]: M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including concealed / surface PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with modular cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fixtures and fittings complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

All as per item No. 78 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on the same board

All as per item No. 78 above but suitable for one 5/6 Amps socket outlet point controlled by one switch on independent board

All as per item No. 78 above but point wiring with PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 4.0 Sqmm (nominal area) suitable for one 15 Amps power point on independent board complete all as specified and directed.

S & F modular switch single pole, 1 way, 6 Amps, 1 module

S & F modular switch single pole, 1 way, 16 Amps, 1 module

S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module

S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module

S & F modular electronic fan regulator, socket type, 2 module complete all as specified and directed.

S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed

S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 18 W output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by the Engineer-in-Charge.

S & F exhaust fan, AC, single phase, 230Volts of size 300mm sweep with louvers, heavy duty, suitable for 50Hz, free air flow complete including provision of 3 core flexible copper cable of suitable size from ceiling rose to fan including making hole of proper size in the wall and making good disturbed surfaces complete all as specified and directed by the Engineer-in-Charge.

S & F MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.

S & F MCB, SPN 40 to 63 Amps, 240 Volts, 10 KA, C series

S & F MCB, SP 6 to 32 Amps, 240 Volts, 10 KA, C series

S & F SRCD protected socket, steel enclosure with two pin and earth plug and socket with 20 amps MCB SP complete all as specified and as directed. Make :-Havells cat part No. DHDDCDP025202003 or its equivalent.

S & F 25mm dia Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. Complete all as directed

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including 25mm dia concealed PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.]

Suuply, laying & testing PVC insulated, sheathed cable, unarmoured, electric control cables (Heavy duty) with stranded copper conductor of size 2 core 16 Sqmm complete all as directed

Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected with galvanised earth wire 4.0mm dia as earth lead by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion complete all as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS angle iron frame 40x40x6mm, RCC 1:2:4 type B-1 cover 40mm thick with 8mm dia steel reinforcement bars at 150mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 15mm dia, earthing lead upto 7.5m including taking down old earrthing sets complete all as specified in preambles of SSR Part-II and as shown in plate No. 3 of SSR Part-I.]

ALLURI CONSTRUCTIONS (BID ID -3487484)

ROHITH INFRA (BID ID -3491258)

K.ADITYA ENGINEERING CONTRACTORS (BID ID -3490720)

SRI LAKSHMI NARASIMHA ENTERPRISES (BID ID -3497287)

PRASAD INFRAS (BID ID -3488883)

Bidder Name

PRASAD INFRAS