UPGRADATION/IMPROVEMENT OF CERTAIN MD ACCN AS PER MAP SPECIFICATION AT AF STN WADSAR AND ADDN / ALTN TO AIRMEN COOK HOUSE (T-5) AT AF STN WADSAR UNDER GE (AF) CHILODA

Amount

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Taking down and refixing shutters of any description exc 1 sqm and n exc 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

Dismantling of steel window /Ventilator frames including shutter (glass & wire mess) and grill complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F in repair for framed work as in door frames or gates chowkats of angle or other section with braces, etc., complete, drilled or welded for ms hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 30 mm thick (stiles), with 2,4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed.

M&L for 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (with shash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified and directed by Engineer- in -Charge.

M&L for 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face. The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated complete all as specified and directed by Engineer- in -Charge.

M&L aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete all as specified and as directed by Engr-in-Charge.

S&F aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tub of size 40x20x2mm (and middle vertical of size 42x46.20x1.50 mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90 mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4 mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and directed by Engineer-in-Charge.

M&L Aluminium powder coated (powder coated of requried colour) windows shutter top, bottom and sides of size 40x18x1.55mm with stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples etc complete all as specified and directed by Engr-in-charge

S&F 5 mm thick glass to aluminium window with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-Charge.

S&F aluminium powder coated (requried colour to match window colour) grill of 5 mm dia squares rectangular triangular circular shape aperture n. exc. 7.00 cm in length or width fixed with H or F channel of décor or equivalent complete all as specified and as directed.

S&F 100 mm long SS butt hinges and fixed to frame with scrwewd or welding / gas welding complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and directed by Engineer - in - Charge.

S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long Floor door stopper of alunium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for painting at old wooden painted surface of any description over 10cm width or grith not otherwise described including preparation , of surface and two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair 25 mm dia Stainless steel drapery rod with and including two nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded and pointed on any mortar complete all as specified and directed.

M&L for grante work (of any type) 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed by Engineer -in -Charge.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the permice complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed.

M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L glazed ceramic coloured tiles 450 x 350 x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 , etc complete all as specified and directed.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc complete all as specified and directed.

M&L for Half brick work sub class B bricks, straight or curved on plan to any radius built in half brick thick walls CM 1:4 complete all as specified and directed.

Demolition of cement concrete (reinforced) of roofs (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) n less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) Type B-1 1:2:4 (using 20mm garded stone aggregate) as in as slab suspended slab, shalves, plateform and the like complete all as specified and directed.

M&L for formworks to sides and sofits of shelves, plateform and thle like rough finished surface of concrete complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of concrete or brick masonary CM 1:6 finished even and smooth (without using extra cement) complete all as specified and directed

M&L for rendering 10 mm thick CM 1:6 and setting coat 5 mm thick CM 1:4 finished even and smooth (without using extra cement) in wall including scaffolding complete all as specified and directed

M&L for rendering 5 mm thick in ceiling surfaces CM 1:4 finished even and smooth (without using extra cement) complete all as specified and directed

S&F of wire netting of galvanised steel wire 1.40mm dia with 20mm size of mess fixed with tinned tacks of wire staples complete all as specified and directed.

M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of weather proof acrylic paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall surface and applyiong two coat of weather proof acrylic paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surface of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above G.L) complete all as specified and directed.

M&L for 75mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in plinth protection and Finishing cement concrete surface even and fair with brooming and every 2mtr constrction joint to be provided and filled with bitumen with saw dust complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as insub base complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey pigment cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick CM (1:6) screed bed or bedding layer complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 57 here in before but 20mm dia.

Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

All as per item No 59 here in before but 20mm dia.

M&L for cutting chases, in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm grith complete all as specified and directed.

Re-fixing old 15mm/20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required complete all as specified and directed.

S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair, two way angle valve cock chromium plated fancy type bore 15mm complete all as specified and directed. Make : L & K code No 0327 or equivalent as approved by GE.

S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs Vitreous china wash basin with pedestal flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs 15 mm dia pillar tapes Fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F in repair PVC waste pipe of 32 mm dia for wash basin/sink complete all as specified and directed.

S&F waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F waste coupling of 40 mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed.

S&F in repair 125 mm dia Fancy type CP shower rose complete all as specified and directed by Engineer-in-Charge.

S&F in repairs SS shop dish of size 100mm complete all as specified and directed.

S&F PVC cabinet with mirror of size 450mmx600mm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern, white excluding fixing cistern and flush pipe trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long including brackets/flanges complete all as specified and directed.

S&F PVC water connection 450 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repair stainless steel 1 mm thick plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed.

Supply & fixed in repair CP peg set of four as per sample kept in GE’s office complete all as specified and directed.

S&F in repairs for PVC kitchen cabinets made with door frame of size 48x40mm, shutter 20mm thick shutter and including 75mm size Stainless steel butt hinges complete all as specified and directed.

S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame complete all as specified and directed.

S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.

S&F door seal strips strong rubber weather stripping door at bottom (standard length) complete all as specified and directed.

S&F in repair for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railling complete incl bolt/bracket for securing to wall complete all as specified and directed.

Dismantling water tanks and exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed.

M&L for removing the tank over roof and re-fixing in the same position including cleaning complete all as specified and directed.

S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L for painting to old steel painted surface of any description over 10cm width or grith not otherwise described including preparation of surface and two coats of synthetic enamel paint complete all as specified and directed.

Taking dawn CI pipe 100mm/75mmof any description complete all as specified and directed.

S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm complete all as specified and directed.

All as per item No 94 here in before but 75mm dia in floor

S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc complete all as specified and directed.

S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let etc complete all as specified and directed.

M&L for bends of any type radius diminishing pieces or tapes (large bore measured) of 75mm dia bore with oval access doors etc complete all as specified and directed.

S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc complete all as specified and directed.

M&L for branch pices single (equal and unequal) ordenary or incerted (spigot or socket type) or with parallel branch of 75mm dia complete all as specified and directed.

S&F 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door complete all as specified and directed.

S&F CI cowls of 100mm complete all as specified and directed.

S&F CI cowls of 75mm complete all as specified and directed.

Taking down PVC pipe (SWR) 75 mm dia bore and connection complete all as specified and directed.

S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints fixed to wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal any radius with acess door complete all as specified and directed.

M&L for Cutting holes into or through brick walls not exc 0.1 Sqm built in cement mortar, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Drilling holes in kitchen platform slab for gas pipe line and making good complete all as specified and directed.

M&L for Non- skid Ceramic coloured tiles 7 to 8mm thick (square/ Rectangular) area of each tiles not exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L Vitrified ceramic (dark shade /double charged / ultracharged) tiles 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 - 25mm thick over cement mortar 15mm (1:6) screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including backing coat complete all as specified and directed.

Grinding and polishing (Mirror finish) to existing Kota stone flooring / skirting in any position complete all as specified and directed.

M&L for granite work (of any type) 20 mm thick (table rubbed and polished) in steps, risers, door jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including CM 1:4 10mm thick including moulding etc complete all as specified and directed.

M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F 18 mm thick factory made PVC solid ply for cupboard shutters, partition, shelves, drawers, and similar work etc of required colour and size consisting of pannels. The visible edge of celuka ply to be lipped with 18 mm wide and 1 mm thick PVC cladding sheet of required colour and fixed with adhesive etc complete as per manufacturer's instruction complete all as specified and directed.

S&F 12 mm thick factory made PVC solid ply for, partition, shelves, drawers, and similar work etc of required colour and size consisting of pannels. The visible edge of celuka ply to be lipped with 18 mm wide and 1 mm thick PVC cladding sheet of required colour and fixed with adhesive etc complete as per manufacturer's instruction complete all as specified and directed.

S&F stainless steel self closing hinges 75 mm size for PVC cupboard shutter complete all as specified and as directed.

S&F stainless steel handles decorative type 125 mm size complete all as specified and directed.

S&F telescopic slider heavy duty for drawer cabinets of 450/600 mm long complete all as specified and directed.

S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed.

M&L aluminium powder coated (powder coated of requried colour) two track sliding windows frame top & sides of size 62 x 31.75 x 1.50 mm, bottom size 62 x 31.75 x 1.50 mm and shutter top & bottom of size 40 x 18 x 1.50 mm and sides (handle) of size 40 x 18 x 1.50 mm and lock side shutter frame of size 40 x 18 x 1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and fixing 4 mm thick glass with necessary rubber beading gasket etc including fixing of stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture covering whole area of opening and fixed with stainless steel wire staples to aluminium frame complete all as specified and as directed.

M&L for aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 1.50 mm thick and shutter with bottom rail of section 150mm x 44.5mm x 1.50 mm thick, middle rail of section 85mm x 44.5mm x 1.50 mm thick and top rail of section 80.4mm x 44.5mm x 1.50 mm thick and styles of section 80.4mm x 44.5mm x 1.50 mm thick with 4 mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150 mm wide and 1.50 mm thick including 150 mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed.

M&L Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm of fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in partition complete all as specified and directed.

S & F 100 mm Butt hinges medium weight cold rolled mild steel complete all as specified and directed.

M&L 5 mm thick cement plaster in CM 1:3 on concrete surfaces of ceilings finished even and smooth without using extra cement complete all as specified and directed.

M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation, priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 25/20 X 12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing complete all as specified and directed for the following :- (a) One light/fan point controlled by one on way switch

All as per item No 129 here in before but One socket outlet 05 Amps on the same board

All as per item No 129 here in before but One socket outlet 05 Amps on independent board

All as per item No 129 here in before but One bell point

All as per item No 129 here in before but Two way light point

All as per item No 129 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and directed.

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F Switch piano, single pole two way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F 3 pin 5 Amps Socket outlet, flush type complete all as specified and directed.

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed.

S&F electric bell ding dong AC 230 volt single pole complete all as specified and directed.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed.

S&F fan regulator electronic step type 230 volts switch /socket type suitable for any type of ceiling fan sweep complete all as specified and directed.

S&F in repairs 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection complete all as specified and as directed for following :- (a) SP 5 To 32 AMP

All as per item No 145 here in before but SPN 40 AMP.

Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed for 25 sqmm, 4.0 core nominal cross section in service connections complete all as specified and directed

S & F in repairs of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted, LED batten fixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w, CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repairs LED light 35 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.Incl all electrical connection complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm incl all electrical connection complete all as specified and as directed.

Supply and fix exhaust fan made of steel body AC single Phase 230V of size 300 mm sweep with, blades, and frame and louvers incl all electrical connection complete all as specified and directed.

Taking down of ceiling fan and depositing to MES store yard including replacement 02 core size 0.75 Sqmm copper wire, painting, servicing and refixing the same on same position after the work complete all as specified and directed.

Taking down of geyser 25 ltr capacity and refixing the same on same position after the work is complete all as specified and as directed.

M&L for in replacement concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green colour complete all as specified and directed. Note- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/floors .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as specified and directed.

Removing excavated soil to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound techinque/ manually and necessary machine complete all as specified and as directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neaoprene 'O' rong of 40 mm size complete all as specified and directed.

DMA PROJECTS (BID ID -3161619)

ALPINE CONSTRUCTIONS (BID ID -3161758)

M/s Matadeen Ramchandra Agarwal (BID ID -3161170)