Re-alignment of pressure main at Alamgari Bazar Srinagar

Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations drains pipes cables etc.(not exceeding 1.5m in width) & for shafts wells cesspits and the like not exceeding 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth & disposal of surplus excavated earth as directed within a lead of 50metres in All kinds of soil

Providing & laying S&S Centrifugally Cast (Spun)/ Ductile Iron pipes conforming to IS : 8329

450mm dia ductile iron pipe K7 pipes

300mm dia ductile iron pipe K7 pipes

250mm dia ductile iron pipe K7 pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

450mm dia ductile iron pipe K7 pipes

300mm dia ductile iron pipe K7 pipes

250mm dia ductile iron pipe K7 pipes

Manufacturing/fabricating/ providing/fixing of MS fittings viz bends tees Collars etc made out of M.S Plates of required thickness excluding cost of lead caulking etc. The work should be leak proof and should be painted anticorrosive red oxide primer. The job is to be paid in fitted and finished from and is to be carried under directions of site engineer.

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 including supply rubber gaskets. 600 mm dia. Pipe. 600 mm dia. Pipe

Providing of mechanical joint 600mm dia which can resist pressure upto 5kg/m2 of standard make. Job includes all sorts of carriage complete job along with Rubber Gasket

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead.

Supplying pig lead at site of work

Providing and fixing of MS Flange of required thickness including cost of nuts bolts and any other pipe special required. Complete job.

450mm dia

300mm dia

250mm dia

Dismantling of 450mm dia DI pipe after laying permanent line incl. all sorts of lift & carriage upto departmental store complete job

Providing and fixing of GI pipes complete job excluding excavation and refilling

65 mm nominal bore

50 mm nominal bore

40mm nominal bore

25mm nominal bore

20mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

65 mm nominal bore

50 mm nominal bore

40 mm nominal bore

25 mm nominal bore

20 mm nominal bore

Providing and fitting of D.I sluice valve of ISI Mark the job includes all sorts of carriage etc. Make: Tailas Kirloskar.

300mm D.I sluice Valve

250 mm D.I Sluice Valve(including Reducer)

Filling available excavated earth (excluding rock) in trenches plinth sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50 m and lift upto 1.5 m. @ 80% of item no. 1

Providing and filling of materials in trenches complete job @ 10 % of item No 1. Stone Dust

Providing and fixing of reflective type SIGN Boards at construction site complete job.

Providing and laying in position of Stone soling in horizontal on level including cost of soling.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering shuttering 1:4:8 stone aggregate 40mm nominal size

Providing & laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering shuttering finishing & reinforcement. All works upto plinth level. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting propping etc. and removal of form for

Foundations footings bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters buttresses plinth and string courses etc.

Suspended floors roofs landings balconies and access platforms.

Steel reinforcement for RCC work including straightening cutting bending placing in position & binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more @ 1.2 Qtl / cum

Providing and fixing C.I. double acting air valve of approved quality with bolts nuts rubber insertions etc. complete including the tail pieces tapers etc. 50 mm dia.

Carriage of material from source upto the site of work by mechanical transport including loading unloading and stacking complete for an average lead

Cement/steel Avg lead 2kms

Sand/ Stone Dust Avg lead 15km

Stone agg Avg lead 10km

Stone Soling Avg. lead of 12 Km