Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.2 LAccepted-Finance | 1 | Accepted-Finance Found Eligible | |
| 2 | 2₹2.3 L+₹3,049 (1.36%)Accepted-Finance | 2 | Accepted-Finance Found Eligible | |
| 3 | 3₹2.3 L+₹3,218 (1.43%)Accepted-Finance | 3 | Accepted-Finance Found Eligible |
| Sl No | Description | Qty | Unit | M/S HI TECH ENGG WORKS L3 | JAI BABA LAL ENTERPRISES L2 | Major Electricals L1 |
|---|---|---|---|---|---|---|
| 1.00 | Replacement of damaged components of the rotor along with allied works of Solid Shaft 6.6 KV. Slip ring type H.T motor No.04 installed at L.I.S Rajal by way of dismantling the motor from motor skirt and then shifting the motor into the vehicle with help crane, unloading the motor at workshop and then dismantling the rotor and stator, removing of old steel wire bands from both ends of rotor windings of motor. Removing of insulation from overhang connections, tracing out the faulty locations/strips, dismantling of overhang connections by de-soldering and extraction of flashed strips along with insulation of damaged strips, precisely and carefully without damaging Cu Strips. Cleaning the rotor slots with chemical cleaner. Complete Job. | 1 | Job | 0 ₹11,500 | 0 ₹11,400 | 112.7 ₹11,157.3 Lowest |
| 2.00 | Insertion of new fully insulated rotor copper strips of 3.00 mm thickness and 18.8 mm width of requisite length as per original Cu. Strip of rotor in place of old flashed strips in respective slots of the rotor with new strip, fixing wedge and checking the IR. value of the new strip, job including cost of material and labour charges. Complete Job. | 12 | Job | 0 ₹76,800 | 0 ₹76,800 | 752.64 ₹74,511.36 Lowest |
| 3.00 | Re-insulation of burnt/heated up insulations of the rotor copper strips after deeply checking the damaged insulation then properly measuring/checking of the IR. value of the strip. Job including cost of material and labour charges. Complete Job. | 18 | Job | 0 ₹46,899 | 0 ₹46,800 | 465.03 ₹46,037.97 Lowest |
| 4.00 | Soldering of all the dismantled overhang connections of both ends of rotor winding and properly insulating the soldered connections. Replacement of the burnt/damaged wedges of the rotor, Cleaning complete rotor with chemical cleaner compound and varmishing with Dr. Beck varnish and drying out with hot air circulation process up to required temperature and binding the both ends of the rotor from the overhang with steel wire bands/glass fibre and insulating material also varnishing the bands. Complete Job. | 1 | Job | 0 ₹44,600 | 0 ₹44,500 | 444.5 ₹44,005.5 Lowest |
| 5.00 | Providing and filling of 15W40 lubrication oil for lubrication of bearing up to the level on overflow pipe after cleaning of bearing oil chamber with flushing oil including the cost of material and labour charges. Job also includes proper greasing to the bearing NU 326/C. Complete Job. | 1 | Job | 0 ₹6,800 | 0 ₹6,900 | 66.64 ₹6,597.36 Lowest |
| 6.00 | Assembling of all dismantled component of motor such as stator, rotor, top and bottom covers, slip ring assembly ,carbon brushes and holding brackets on motor along with checking, greasing, adjusting the bearing, restoration of dismantled cable connections of rotor, stator commutator assembly, L.R.S. trifurcated sealing box and testing commissioning on full load at site. Complete Job | 1 | Job | 0 ₹9,870 | 0 ₹9,900 | 98 ₹9,702 Lowest |
| 7.00 | Carriage/ Shifting of damaged motor from LLS Rajal up to workshop & then shifting of repaired motor No. 04 from workshop to 1.LS Rajal after repairing. It includes loading/unloading charges. (Rate for shifting may vary as per the distance of the workshop from the Lift Station Rajal.). Complete Job. | 1 | Job | 0 ₹31,500 | 0 ₹31,500 | 308 ₹30,492 Lowest |
Tender Value
₹2.3 L
EMD Value
₹4,652
Closing Date
18 Aug 2025, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Replacement of damaged components of the Rotor along with allied works of Solid Shaft 6.6 KV, Slip ring type H.T motor No. 04 installed at L.I.S Rajal
2025_IFC_283594_1
MID/AN/30
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
15 days
Rajal
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Executive Engineer MID Akhnoor/Nowshera
₹4,652
Yes
Office of Executive Engineer MID Akhnoor/Nowshera
21 Aug 2025
7 Aug 2025
19 Aug 2025
7 Aug 2025
18 Aug 2025
9 Aug 2025
8 Aug 2025
Replacement of damaged components of the rotor along with allied works of Solid Shaft 6.6 KV. Slip ring type H.T motor No.04 installed at L.I.S Rajal by way of dismantling the motor from motor skirt and then shifting the motor into the vehicle with help crane, unloading the motor at workshop and then dismantling the rotor and stator, removing of old steel wire bands from both ends of rotor windings of motor. Removing of insulation from overhang connections, tracing out the faulty locations/strips, dismantling of overhang connections by de-soldering and extraction of flashed strips along with insulation of damaged strips, precisely and carefully without damaging Cu Strips. Cleaning the rotor slots with chemical cleaner. Complete Job.
Insertion of new fully insulated rotor copper strips of 3.00 mm thickness and 18.8 mm width of requisite length as per original Cu. Strip of rotor in place of old flashed strips in respective slots of the rotor with new strip, fixing wedge and checking the IR. value of the new strip, job including cost of material and labour charges. Complete Job.
Re-insulation of burnt/heated up insulations of the rotor copper strips after deeply checking the damaged insulation then properly measuring/checking of the IR. value of the strip. Job including cost of material and labour charges. Complete Job.
Soldering of all the dismantled overhang connections of both ends of rotor winding and properly insulating the soldered connections. Replacement of the burnt/damaged wedges of the rotor, Cleaning complete rotor with chemical cleaner compound and varmishing with Dr. Beck varnish and drying out with hot air circulation process up to required temperature and binding the both ends of the rotor from the overhang with steel wire bands/glass fibre and insulating material also varnishing the bands. Complete Job.
Providing and filling of 15W40 lubrication oil for lubrication of bearing up to the level on overflow pipe after cleaning of bearing oil chamber with flushing oil including the cost of material and labour charges. Job also includes proper greasing to the bearing NU 326/C. Complete Job.
Assembling of all dismantled component of motor such as stator, rotor, top and bottom covers, slip ring assembly ,carbon brushes and holding brackets on motor along with checking, greasing, adjusting the bearing, restoration of dismantled cable connections of rotor, stator commutator assembly, L.R.S. trifurcated sealing box and testing commissioning on full load at site. Complete Job
Carriage/ Shifting of damaged motor from LLS Rajal up to workshop & then shifting of repaired motor No. 04 from workshop to 1.LS Rajal after repairing. It includes loading/unloading charges. (Rate for shifting may vary as per the distance of the workshop from the Lift Station Rajal.). Complete Job.
JAI BABA LAL ENTERPRISES (BID ID -2443994)
M/S HI TECH ENGG WORKS (BID ID -2444941)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .