Dismantle, Repair and Re-erection of PLM towers and providing lighting at CHP RTPS

Dismantle, Repair and Re-erection of PLM towers and providing lighting at CHP RTPS

Supply of 3 phase 415V 50Hz 1.5HP induction motor

Supply of 30mtr PLM Gear Box complete with chain and all accessories

Supply of Steel wire rope 8mm/6mm diameter

Supply erection, testing and commissioning of control panel including 32A load break switch, 32A HRC fuse cutouts, 40A Power contactor, Analog timer switch and auto/manual toggle/Selection switch, 32A...

Supplying of Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working volta...

Supply and fixing of 32A copper Busbar box in colour coded sleeves, busbar insulators, Triple pole with neutral, 1.1KV grade

Supply and installation of 230V aviation light complete set

Dismantling of 30 mtr Polygonal Light Mast, repair/reconditioning, painting and re-erection using hydraulic crane and replacement of PLM steel wire rope and flexible Cable complete.

Replacement of 415V 50Hz 3 phase PLM motor

Replacement of PLM gearbox

Replacement of PLM gearbox oil seal, oil and Servicing of Gear box complete

Dismantling old control panel, JB, Fittings etc.

Supply of Stainless steel, nickle plated Double compression gland suitable for 5CX6 Sqmm, Copper unarmoured cable.

Supply of Stainless steel, nickle plated Double compression gland suitable for 3.5CX25 Sqmm, Aluminum Armoured cable.

Supply and laying of GI Pipe, 50 mm Dia for cable rising etc.,

Timer- Dial 24hours 240v Ac 45-65hz. Clock Accuracy: +/- 2.5 Sec Per Day 1 C/O Contact FM Series Make: Larsen & Toubro

MNX 32 CONTACTOR-230V 3 Pole Contactor, Coil Operating Voltage :230 Volts Make: L&T

MNX18 CONTACTOR L& T Power Contactor, 3-Pole , 3 phase, 415 Volts, Current: 18 Amps, AC3 duty, Model: MNX 18 L&T Make, Operating Coil Voltage: 230 Volts AC, 50Hz, Auxiliary Contacts: 2NO+2NC MAKE: L&T

L&T Add On Block 1NO+1NC MNXA2, MAKE: L&T

Supply and fixing of Name plate for towers

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Digging of Pit for providing GI Pipe type Earthing. Ordinary Soil

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip

Laying of cable in Existing trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT cable-2.5 to 25 sq.mm.

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 4...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Brick - Table Moulded Bricks

Caution/Danger Board

Fixing Danger Board