Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.2 L+₹4.6 L (19.2%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical 25 KARAMBHUMI SAMASGARH ROAD SAMAGARH BHOPAL MADHYA PRADESH 462044 | BHOPAL | MADHYA PRADESH | 462044 | - | Rejected-Technical No valid license |
Tender Value
₹29.5 L
EMD Value
₹50,000
Closing Date
25 Jan 2023, 5:00 pmClosed
Asst. Exe. Engineer Agri Kannur
Office of Asst. Exe. Engineer Agri Kannur
Renovation of Polyhouses and shadehouses at DAF Thaliparamba
2023_AGRI_550359_1
AGRI/DOA/51/2022-2023
Open Tender
Civil Works - Others
Item Rate
150 days
DAF Taliparamba
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹50,000
Yes
22 May 2023
17 Jan 2023
28 Jan 2023
17 Jan 2023
25 Jan 2023
17 Jan 2023
Amount
Poly Houses and Shade houses
2.9.1:Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD12/2022-2023:Dismantling old damaged green shade net
OD10/2022-2023:Dismantling old damaged UV sheet
OD16/2022-2023:Dismantling insect proof netting
50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
OD18/2022-2023:Supplying and laying 40 mesh insect proof netting sufficient to cover all vents of the structure
OD24/2022-2023:Supplying and laying 200 micron 5 layer UV stabilized polyethylene sheet fixed in Aluminum locking channel with galvanized zig zag spring including cost of all materials and conveyance but excluding cost of aluminium channel and zig zag spring.
OD25/2022-2023:Supplying fixing and laying 50 to 75% green /black shade net including all laborer charges and tying material etc
OD26/2022-2023::Supplying fixing and laying 50 to 75% green monofilament shade net on the movable shadenet screeing as open close system without damaging shadenet with manual rolling system including all frame works and necessary fittings at a user comforable height
OD27/2022-2023::Supplying and fixing Aluminium locking profile in self driven screw with Galvanised zigzag spring
OD28/2022-2023:Supplying and fixing UV stabilized 2 mm thick plain sheet for draining out water
OD29/2022-2023:Supplying Galvanised zig zag locking spring for poly sheet fixing in Aluminium channel
OD30/2022-2023:Scrapping, cleaning old painted surface and preparing the surface clean for painting free of rust
14.55.1:Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work
Display shed
OD37/2022-2023:Earth work in excavation by mechanical means (Hydraulic excavator)over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD997/2022-2023:Dismantling and stacking materials useful for reuse any thickness of wall of Laterite in cement mortar and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-Charge.
50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
50.6.7.2:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.23:Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand).
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
OD990/2022-2023:Supplying and fixing GI pipe( B class) pillar with MS base plates top and bottom including cutting,hoisting, fixing position, drilling , welding charges and applying a priming coat of approved steel primer, etc. complete
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD996/2022-2023:Supplying and fixing Aluminium locking profile in self driven screw with Galvanised zigzag spring
OD995/2022-2023:Supplying and laying 200 micron 5 layer UV stabilized polyethylene sheet fixed in Aluminum locking channel with galvanized zig zag spring including cost of all materials and conveyance but excluding cost of aluminium channel and zig zag spring.
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
OD1986/2022-2023:Supplying and installing 1.5HP single phase submersible pump set with ISI specification min 4 star rating 45m head, 1.3 lps including pannel board, fittings and and all labour charges etc. complete
50.18.9.6.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 10Kgf/cm2
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wall
OD88/2022-2023:Supply and fitting20m3/hr Disc filter with fittings etc complete
OD75/2022-2023:Providing and fixing PVC ball Valve of approved quality 50 mm nominal bore
OD90/2022-2023:Supplying and fixing 50mm submain flush valve for fixing of the distribution line for flushing
OD87/2022-2023:Supplying and laying LLDPE laterals 16 mm
OD86/2022-2023:Supply of poly gromet take off 16 mm for taking connection from PVC sub main
OD85/2022-2023:Supplying and fixing 16mm poly connector, poly tee
OD91/2022-2023:Supply of 16mm poly end stop
OD93/2022-2023:Supplying and fixing fourway fogger emiters leakproof snap, fit joint , fine droplets and 7-8 lph artoperating pressure, 3.5 bar
OD94/2022-2023:Supplying and tying cable tie for tying pvc pipe to truss
OD95/2022-2023:Supplying stainless steel wire
16.91.1:Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
Special repair of poly house damaged in natural calamity
OD97/2022-2023:Dismantling old damaged UV sheet
OD105/2022-2023:Dismantling Aluminium Channels with zig zag spring
15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,boltd, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
OD99/2022-2023:Engaging labour dismantling irrigation system
2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD100/2022-2023:Supplying 65mm Gi pipe for pillars using department pipe
4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)
50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
OD101/2022-2023:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including hoisting,fixing in position and , including welding and bolted with special shaped washers etc. complete using department GI pipe
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD104/2022-2023:Supplying and fixing Aluminium locking profile in self driven screw with Galvanised zigzag spring- dept channels and new spring
OD102/2022-2023:Scrapping, cleaning old painted surface and preparing the surface clean for painting free of rust
14.55.1:Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work
13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
OD120/2022-2023:Supplying and laying 200 micron UV stabilized polyethylene sheet fixed in Aluminum locking channel with galvanized zig zag spring including cost of all materials and conveyance but excluding cost of aluminium channel and zig zag spring.
OD119/2022-2023:Supplying fixing and laying 50 to 75% green /black shade net including all laborer charges and tying material etc
SHAFEEQ C.A
PRABHAVI BIOTECH AND TRADING PVT.LTD
Bidder Name
B I ABOOBACKER SIDIQ
SHAFEEQ C.A
PRABHAVI BIOTECH AND TRADING PVT.LTD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_807004.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .