Special repair to Health Sub Centre Building at Basalan Tehsil Lad-Bharol District Mandi (HP) under Deposit

Amount

Demolition above Ground level upto floor level including disposal of un-serviceable materials with in 20mtrs lead un- reinforced cement concrete upto 15mm thickness including carriage of material and other incidental charges complete in all respect.

Demolition above ground level upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from RCC/RB works.carriage of material and other incidental charges complete in all respect.

Dismantling doors, windows and clerestory window vantilators etcetra (wood or steel) shutters upto 3.00 (three point zero zero) square metre in area including chowkhats architaves, hold fast and other attachments etc complete and stacking them including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Cutting in earth work and disposal of excavated earth upto a lead of 20mtrs .in Pick work including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (One cement : two sand : four graded/crushed/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their support balconies beams girders bressumers and cantilevers upto floor all level including carriage of material within all leads and lifts complete in all respect.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect.

Providing second class deodar wood work in frames of doors, windows, clere story windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all respect.

Prooviding & fixing panelled glazed or panelled glazed shutter for door window and clerestory windows including black enamelled iron butt hinges with necessary screws 35mm thick 2nd class Deodar wood including carriage of material within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 30mm (forty millimeter) thick second class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85g (Eighty five) gauge with wire of diameter 0.56mm (zero point five six millimeter) for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of material with in all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior grade panelled shutters with 40mm (forty millimetre) thick frame styles and rails of first class deodar wood for doors including bright finished/black enameled iron butt hings with necessary screws as per architectural drawing and approved specification including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

250x16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

250x10mm (Two hundred fifty into ten millimeter)

100x10mm (One hundred into tenmillimetre)

Providing and fixing mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and laying duro stone vetrified tiles(300x300x10mm) in grey/coloured or of approved shade in flooring treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required including carriage of material within all leads, lifts and other incidental chages complete in all respect.

Providing and laying duro stone viterified tiles of size upto (300x300mm (three hundred into three hundred millimetre) of specified shade in skiring and risers of steps upto any height laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

Pointing on square rubble coursed or un-coursed stone masonry with cement mortar 1:3 (one cement : three sand) ruled pointing including curing compete carriage of materials within all leads and lifts complete in all respect.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect.

Repair to plaster in patches of 2.50 sqm (two point five zero square metre) and under 10 to 15mm (ten to fifteen millimetre) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a lead of 20 (twenty) metre with cement mortar 1:6 (one cement : six sand) including curing, carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Extra over item No.17170000 and17171000 for distempering with oil bound distemper on ceiling and /sloping roof.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded/crushed crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate of twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction of Engineer in Charge

Water supply and stanitary installation

Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimeter) nominal bore

20mm (twenty millimeter) nominal bore

Providing and fixing PVC 1000 ltr. (one thousand litre) water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing, high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads and lifts.

110mm (one hundred ten millimeter) nominal size

75mm (seventy five millimeter) nominal size

Providing & fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etcetra completeincluding carriage of materials within all leads and lifts..

110mm (one hundred ten millimeter) nominal size

75mm (seventy five millimeter) nominal size

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

110mm (one hundred ten millimeter) nominal size

75mm (seventy five millimeter) nominal size

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

75mm (seventy five millimeter) nominal size

Providing and fixing 110mm x 75 mm (one hundred ten into seventy five millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC 110mm size (One hundred ten millimetre)size “P” or “S” trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and and PVC pipe with approved adhesive etcetra complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 610 x 510 x 200 mm ( six hundred ten into five hundred ten into two hundred millimetre) stainless steel kitchen sink of approved standrad ISI make with drain board and CP waste with C.I. or M.S. brackets, painted white including cutting hole and making good the same but excluding fitting including carriage of material within all leads and lifts complete in all respect.

Providing and fixing Orrisa pattern vitreous China wash down water closet squatting pan (Indian type W.C.pan)size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing veterious China wash down water closet (European type W.C. pan) with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (seat and cover to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 10 to 12.50 ltrs (ten to twelve point five liters) vertious china low level flushing cistern with a pair mild steel bracket compete with fitting such as lead valve less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythine float, C.P. brass handles unions and coupling for connections with inlet outlet and over flow pipes 40mm (forty millimeter) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing plastic seat (sold/hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers hollow type black or white plastic seat and cover including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre MI union for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully, floor or nahni trap complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 750x20mm (seven hundred fifty into twenty millimetre) CP brass towel rail heavy duty complete with CP brass brackets fixed to wooden plug with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing choromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing & fixing PTMT jet sprey of approved quality and coloured with one metre tube complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing CP brass angle valve 15mm (fifteen millimetre) without nut and pipes complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing CP brass pillar tap with capstan head 25mm dia complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

15mm (fifteen millimeter) nominal bore

Tej Singh