Bid Document of CNCD Department (AMC) to award the requirement of Repairing, Renovation, Maintenance and Upgradation, work etc. of CNCD Dept. AMC.

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

Coarse sand : 8- Graded Brick bats aggregate 40mm normal

1 size) and curing complete excluding cost of formwork in (A) Cmt

Providing and laying cement concrete 1:3:6 (1- Cement : 3-Coarse

2 sand : 6- Hand broken stone aggregates 40mm nominal size) and cmt

curing complete.

Providing and laying controlled cement concrete M.250 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies,

Lintels, Beams, Girders and Cantilever up to floor two level.

GROUND FLOOR cmt

FIRST FLOOR cmt

Extra for additional lift of concrete for all R.C.C.work above floor

two level excluding cost of reinforcement

SECOND FLOOR cmt

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg/Sq. cm. in foundations and

plinth in cement mortar 1:6 (1 cement :6 fine sand) for

conventional type bricks.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg/Sq. cm. in cement mortar 1:6

(1 cement :6 fine sand) for superstructure up to two level height.

For conventional type bricks.

(A) For Superstructure above plinth level up to floor two level

(B) Conventional.

GROUND FLOOR cmt

FIRST FLOOR cmt

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Lime mortar 1:1.5 (

1- Lime :1.5 -coarse sand ) in foundation and plinth.

(B) Conventional.

Extra for half brick masonry in superstructure above plinth level up

8 to floor two level.

(B)Conventional

GROUND FLOOR smt

FIRST FLOOR smt

Providing 15 mm thick cement plaster in single coat on Rough

(Similar) side of single or half bricks walls for interior plastering up

to floor two level and finished even and smooth in (ii) Cement

Mortar 1: 4 (1 Cement : 4 Sand). This includes finishing with a

floating coat of neat slurry and doing plaster after making thaiyaas

/ levellers and after approval from engineer in charge.

GROUND FLOOR smt

FIRST FLOOR smt

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

10 sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry smt

including rubbing and polishing etc. complete.

(B) 30 mm thick.

Providing and laying polished kota stone slab 25 mm thick in risers

of steps, skirting dedo and pillars laid on 10 mm thick cement

11 mortar 1:3 (1 Cement : 3 Coarse sand) and jointed with gray smt

cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Providing and applying penetrating & crystalline water proofing

treatment to RCC Structures. Work shall be carried out suing

12 Penetron Products / Equivalent brand but of same standard and smt

quality. The treatment shall be done as per the instructions of

manufacturer and as approved by the consultants.

13 Providing cement vata (10 cms. X 10 cms size) quarter round in rmt

cement mortar 1:1 including neat cement finishing, watering etc.

Providing and fixing Black or any approved colour Granite Stone

Counter for wash basin and sitting arrangement etc. The counter

shall be sandwich type and shall have Polished kotah stone as base

on which the granite stone shall be resting. The counter shall be

embedded in the wall at least 50 mm and shall be self resting and /

or having granite stone as base. The visible edges of the Polished

Kotah stone shall be cladded with the Granite stone. The shape of

the final product shall be of any shape in plan.

Providing,fixing at site 18-20 mm thick black coloured Granite

stone on the bottom,sides,top of window, door and vent

periphery, Self and sill, with necessary moulding at edges, fixing

15 with araldite wherever required including smt

cutting,grinding,moulding,making necessary holes, metallic Anchor

fasteners, making necessary provision for fixing of MS Grill and

windows, all contingencies etc. complete.

Providing and fixing Double side polished 25 mm thick white or any

colour marble stone to be fixed as a partition in wall. The size of a

partition shall be 1.20 Mts. X 0.75 Mts. One side of 1.20 Mts length

shall be embedded at least 50 mm in the wall vertically and shall

16 be fixed with Cement Mortar 1:1. The partition shall be fixed after smt

cutting the stone as per the design and pattern approved. The

shall be polished on both the sides and shall be fixed as per the

directions of the project consultants. All the visible edges of this

stones shall be properly moulded and polished on site.

Providing and laying white glazed tiles 6mm thick in skirting risers

17 of steps and dado on 10mm thick cement plaster 1:3 (1-cement : 3- smt

coarse sand) and jointed with white cement slurry .For Dado

Providing and laying coloured glazed tiles of the size 300 mm

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

18 risers of steps and dedo on 10 mm. thick cement smt

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

Applying priming coat over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil,

20 grease, dirt and other foreign matter and scoured with brushes smt

fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

21 give an even shade including cleaning the surface an even smt

shade including cleaning the surface of all dirt, dust and other

foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

even shade including thoroughly brushing the surface free from

22 mortar droppings and other foreign matter and sand papered smt

SOR-2023-24 GOVERMENT OF GUJARAT R&B DEPARTMENT

Extra over item (Add 18031 AS PER SOR ITEM NO:18.57 P-135) for

every subsequent coat of wall painting with plastic emulsion paint

23 ceilings roof of approved brand smt

SOR-2023-24 GOVERMENT OF GUJARAT R&B DEPARTMENT

Providing and applying 2 mm thick texture of specified quality

approved make make of Asian, Nerolec or equivalent as per

approval of EIC over plastered surface, at all levels, all floors, all

height, all complete as per drawing, specifications, instruction &

directions of the Engineer-in charge. Payment shall be done as per

drawing/laid at site of plastered area.

Providing and laying Texture paint of 1.00 mm thick and of

25 approved shade, pattern on wall / ceiling of plastered or Sq.M.

wooden panel / ceiling. Rate include necessary back coat

laapi, texture grout, and finishing coat of plastic emulsion

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

27 Febrication new kg

28 Febrication reparing kg

29 Aluminium saction sq.ft

30 Bricks work sq.ft

31 Plaster per sq.ft

32 Floring work with vitrified tiles sq.ft

33 Floring with kota stone sq.ft

34 Plumbing 1/2 per ft

35 Plumbing 1 per ft

Providing and fixing 35 mm thick water proof flush doors, rate also

includes 10 x 7 cms teak wood (pure saag) frame and including

fixing of 1.00 mm thick laminate sheets ( Door Skin) on both sides

of the doors , border pattis of C.P. Saag on thickness of the doors

on all four sides, polishing the same and fixtures fasteners

complete as directed.Atleast 1 Aldropt, 4 hinges, 2 Handles (8") ,

hinges, (4"), 1 stopper (10") , 1 taadi (10") , 1 door magnet / stop in

Gypboard false ceiling (Gyproc ‐MR (Moisture resistant).

Providing and fixing M/F Suspended ceiling, which includes

Gypsteel ULTRA ™ CRP surface ribbed perimeter channels

(having one flange of 20mm and another flange of 30mm and

a web of 27mm) along the perimeter of ceiling, screw fixed to

37 brick wall/partition with the help of nylon sleeves and screws, smt

at 610mm centers. (Single layer of 12.5mm tapered edge

Gyproc® MR (conforming to BS 1230 part‐1) Rate to include

making cut outs for light fittings, grills diffusers, etc with

necessary G.I. framing around the cut outs to make it strong

& stable (Heavy Duty type).

Providing and fixing of Roller blind curtain/blackout. The fabric

shall be woven from formulated platisol extruded over a polyaster

yarn.The fabric shouldl be weaved to provide subtle view of the

side of the blind and should offer elimination of glare and sunlight

radiance upto a minimum of 80%.The fabric shall be flame

Chain-link Fencing ( 4' 0" Tall ) with Necessary 3" Diameter M.S.

Pipe of size 1.50 Mts. and frame of 35 x 35 x 5 mm M.S. angle and

fixing with 25 x 5 mm M.S. Flat, including necessary foundation

work with R.C.C. 1:2:4, of size

at least 350 mm x 350 mm x 230mm. Rate also includes painting all

the steel works with one coat of Primer coat and 3 coats of

approved brand and shade oil bound enamel paint, etc. Complete.

The spacing of the chain-link shall be not more than 50 mm c/c,

and the gauge of the wire used shall be 10 gauge.

Providing and fixing wash down water closet (European type,

W.C.Pan) with integral P or S trap including jointing the trap with

40 soil pipe in Cement Mortar 1:1 (I-Cement: 1-fine sand) (Seal and No

cover to be measured and paid for separately) (A) vitreous china

Pattern :(i) in white colour.

Providing and fixing G.I. inlet connection for flush pipe with W.C.

Providing and fixing plastic seat and cover for wash down water

42 closer with C.P. brass hinges and rubber buffers. (B) Black plastic Each

seal and cover.

Providing and fixing washbasin with single hole for pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

making good the same but excluding fittings.(A)Vitreous China:(ii)

Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted

white including cutting holes in walls and making good the same

but excluding fittings. (C) Vitreous China Sink.(i) 600mm x

450mm x l50mm size

Providing and fixing C.P. brass towel rail complete with C.P. brass

45 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x Each

Providing and fixing C.P. brass waste for washbasin or sink.

Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin.

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing Heavy Duty Stainless Steel flexible

Connection Pipe Set with Acessories

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) l5mm dia.for washyard

Providing and fixing 600mm x 450mm bevelled edge mirror of

51 superior glass mounted on 6mm thick A.C. sheet or plywood sheet Each

and fixing to wooden pluge with C.P. brass screws and washers.

52 Providing and fixing Rubber plug for sink or wash basin. Each

Providing and fixing chromium plated,C.P.Angle stop cock 15 mm

Heavy duty with cap of approved quality for .

Providing and fixing Urinal of approved quality including

54 connection with trap and with integral longitudinal flush pipe.(A) Each

Squating plate pattern white earthenware 550mm x 300mm.

Providing and fixing C.P.brass waste for urinal. (B) 40mm dia.

Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin/urinal.

Providing and fixing chromium plated brass half turn flush cock of

57 approved quality including fixing in pipe line etc. complete.(i) Each

Providing and fixing water closet squatting Pan (Indian type W.C.

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour.

Providing and laying in trenches galvanized mild steel tubes

(Medium grade) of the following nominal bore, and tube fitting

(Earthwork in trenches to be measured and paid for separately)

Providing and laying in trenches galvanized mild steel tubes

(Medium grade) of the following nominal bore, and tube fitting

(Earthwork in trenches to be measured and paid for separately)

Providing and fixing Gun metal check or non-return full way wheel

valve. (A) 15mm dia.

Providing and fixing Gun metal check or non-return full way wheel

valve. (B) 20mm dia.

Providing and fixing Gun metal check or non-return full way wheel

valve. (C) 25mm dia.

Providing and fixing Gun metal check or non-return full way wheel

valve. (D) 32mm dia.

Providing and fixing Gun metal check or non-return full way wheel

valve. (E) 40mm dia.

Providing and fixing ball cock of approved. Quality as directed.

(A)Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved. Quality as directed.

(A)Copper Metal (ii) 50mm dia.

Providing and fixing ball cock of approved. quality as directed. (B)

Abonite (i) 25mm dia.

Providing and fixing ball cock of approved. quality as directed. (B)

Abonite (ii) 50mm dia.

Providing and fixing in position cowel went to pipes.(C) l00mm

Providing, laying and jointing in true line and level 160 diameter

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735 -1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

71 shall be fixed on wall using of PVC clamp of the size 160mm Rmt

diameter x 210mm length x 196 mm height at every 2000 mm

center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Providing, laying and jointing in true line and level 110 diameter

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring,& fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

72 shall be fixed on wall using of PVC clamp of the size 110 mm Rmt

diameter x 149 mm length x 145 mm height at every 2000 mm

center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Providing and fixing PVC SWR pipes IS 13592 for Drain - 75 mmdia

73 SOR-2023-24 GOVERMENT OF GUJARAT R&B DEPARTMENT m- Rmt

Providing and fixing P.V.C. Pipes 10 kgf / Sq.cm. 50mm dia.

74 SOR-2023-24 GOVERMENT OF GUJARAT R&B DEPARTMENT m- Rmt

75 Providing and fixing P.V.C. Pipes 10 kgf / Sq.cm. 40mm dia.. Rmt

Providing and fixing PVC SWR P- Trap IS 14735 for Drain -110x110

Providing and fixing PVC SWR Nahni trap IS 14735 for drain-

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -75 mm

diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints complete.(A) l00mm

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints complete.(B) l50mm

Providing and laying Cement concrete 1:5:10 (1Cement : 5-Fine

sand :10-Graded stone aggregate 40mm nominal size) bedding for

81 stoneware pipes of following internal diameters with necessary Rmt

formwork and curing complete. (A) 100 mm dia. (112 mm Ave.bed

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete.(B) l50mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non- pressure pipes I.S. class NP3 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non- pressure pipes I.S. class NP3 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete. (D) 300mm

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non- pressure pipes I.S.class NP3 of the

following internal diameter with collars and butt ends prepared for

collar joints including testing of joints complete.(E) 450mm

Providing and fixing l00mm sand cast iron grating for gully, floor or

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.

(B) l50mm x l00mm size P or R type

Constructing Brick masonry road gully chamber 500mm x 450mm x

88 600mm including 500mm x 450mm C.I. horizontal grating wih Each

frame complete.

Constructing brick masonry road gully chamber 1100mm x 775mm

89 including 500mm x 450mm (C.I.horizontal grating with frame and Each

vertical grating complete.)

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

Providing and fixing cast iron steps of size 500mm x l50mm x

91 22.5mm and painting with two coats of Anti-corrosive paint etc. Each

Supplying and fixing C.I. cover 300mm x 300mm without frame for

92 Gulley trap (Standard pattern) the weight of cover to be not less Each

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 6l0mm internal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

93 of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse Each

sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete. (iii)Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more inlets.

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and connection

Supplying and erecting water filter cum purifier with

ultra violate technology. (Aquaguard / waterdoc model or

symphony/ crystal/videocon model)

96 Aluminium : smt

Providing & Fixing in position External quality

high grade anodized (preferably M-6), Aluminum Door

Ventilations, window Fix /sliding type - 2/3/4 Track with frame &

shutter using approved quality Metalic color anodised aluminum

section of standard weight of "Jindal" or equivalent make,

including P/F installing 5 mm thick approved Clear or Frosted Glass

of Modiguard or equivalent make with Necessary Fixtures &

Fittings of standard quality as approved by engg.in charge etc.

complete as directed and approved. Rate includes all necessary

hardware, fixtures, locks, handles, door-stop, door-magnets, etc.

as required upto the fullest satisfaction of consultants. The

ventilations shall be of movable type.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m,

vertical member of size 122.20mm x 31.75mm x 1.50mm

@1.398 kg/mt with sliding shutters of horizontal member

97 size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of smt

size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm

thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for

window. (Ahmedabad City Building SOR 2023-24) Item code-

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x 24mm

x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member

size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt

98 with sliding shutters of horizontal member size 40 smt

mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member

of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon Sealant glass fixing to frame as per details etc .

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak wood

99 frames 10 cm x 7 cm. size including anodized

alluminium fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.

(i) Fully Glazed. smt

(ii) Fully Panelled. smt

(iii) Partly panelled and partly glazed. smt

Making Water connection from exi.Muni.Water line. No.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is

recommended one litre chemical emulsion diluted with 19 liters of

kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on

wood surface not protected by paint or varnish.

Providing and fixing hydraulic door closer of approved size of Ebco,

kadson, falcon or equivalent ISI make as directed etc. complete

Providing 2 mm thick F.R.P.Gutter with necessary M.S.Supporting

Dismantling santtary fittings like wash basin . W.C. pan Indian

103 and European type, flushing tank etc. including stacking the Each

materials with all lead and lift.

Supplying and fixing PVC water tank of ISI mark including delivery

at site,supply and fixing inlet,outlet, overflow,ballcock,drainage

sleeves of specific size with necessar neoprene/gasket/ packing/

washer,G.I washer and checknut etc.compt. as directed on terrace,

loft,bathroom etc in any height. The rate shall be included for

fixing additional accessories supplied by suppliyer accessories.

Provoding and fixing 1.2x0.6 mt board with 14 gauge MS sheet

colored three coats of approved quality of oil paint with Radium

Numbering. Fixing with necessary bolt, screws etc. up to any lead

from fabrication unit to Municipal building

Providing & Laying LED Tubelight of approved quality & syska,

106 philips, or equivalent brand with necs. tolls & fittings. Rate also No.

include all types of labour work & conveying charges. Etc. comp.

Removing and scraping of old deteriorated bathroom-toilet Dado /

flooring of any thickness from wall / R.C.C member, flooring

including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Providing & Fixing 25mm dia UPVC valve/cock to wall,ceiling &

floor open / concealed UPVC pipeline Schedule - 80 of "Prince" or

108 equivalent Brand of following nominal bore with all required fitting No.

with brass insert wherever required,clamps & solution incl.making

good the wall,ceiling and floor.

Providing and fixing Flush tank in position with clamps, 32mm

nominal internal diameter flush pipe for high level flushing cistern,

etc. including connecting the flush pipe with cistern and closet and

making good the walls and floors.

Providing and fixing following thickness glass. The glass shall be

fixed either with beading patti or as directed by the consultants. It

also includes necessary frosting in pattern as per the design /

directions and also the moulding if necessary.

b) 8 mm thick (toughened) smt