WBPWD/EE/BED/e-NIQ-71/2024-25

Amount

Taken down the existing fan from its original position i.e, Ceiling / Wall and re-fixing the same after overhauling and repairing:

48'' sweep Ceiling Fan

9 "/ 12'' / 24" sweep Exhaust fan

12'' / 16" sweep Cabin Fan / Wall bracket fan

Washing and cleaning different fan blade,cover/ net with soap and water.

Overhauling Cleaning , greasing ,baking ,heat varnishing the 48'' sweep ceiling fans including testing.

Overhauling Cleaning ,washing, greasing ,baking ,heat varnishing the 9" / 12'' / 24" sweep Exhaust fans 12'' / 16" sweep Wall bracket fan including testing.

Opening the fans, cutting burnt out coil from stator, cleaning the stator, testing, rewinding by supplying super enamelled copper wire of appropriate gauge, minilex paper mica sheet, changing the loops overhauling ,greasing ,backing ,heat varnishing and refitting the same & testing.

48’’ sweep AC ceiling fans

9 "/ 12'' / 24" sweep Exhaust fan

12'' / 16" sweep Wall bracket fan

18'' / 24" pedestal fan / Metal body wall fan

3 HP 3 Phase Motor

S&F of split pin. (Good Quality)

S&F set screw. (Good Quality)

S&F Jam nut. (Good Quality)

S & F rubber insulator. (Good Quality)

Supply & fixing of condenser carrier in place of damaged one including screw etc.

Supply & fixing of new bush bearing against defective one as and where it will be neccessary.

Supply and fixing of suitable down rod wire as required.

S & F 2.5 MFD Condenser(oil filled) Make- Universal

S & F 4.0 MFD Condenser(oil filled) Make- Universal

S & F Ball Bearing (TATA/SKF)

Patch repairing of the ceiling fan / wall fan / exhaust / pedestal fan

Supply and fixing of new shaft in place of old shaft on lathe with necessary machining and processing

Fan stator Shaft welding,lathe cutting and polishing.

Making proper curving, straightening of defective fan blade and its sang to original finish at Co.’s Workshop.

Changing the starting and running coil loop including the side connection wire and also heat varnishing complete as per E.I.C.

S & F 16 SWG GI Safety Wire with necy.Nut- bolt - Washers etc. as approved by PWD as per direction of EIC.

S/F of 1/2'' dia. PVC Flexible pipe from ceiling rose to top canopy of ceiling fan.

S/F New Ceiling rose with replacement of old one & necessary connection of Ceiling fan (Approved Make).

S/Drawing of 2X1.5sq.mm.downrod wire from ceiling rose to connector.

Supply & Replacing of 6 A, ‎Multicolour Speed Control & ON / OFF Switch For Cabin / Wall / Pedestal Fans

Supply & Fixing of heavy duty Steel Bracket Clamp for Wall Mounted Fan With Wooden Gutkha, Screw as required for 10 Kgs. hanging weight capacity.

Supply & Replacing of 300mm, Bright Nickel Chrome Coloured Stainless Steel Fan Guard for 92mm Axial Fans

Loading, Unloading & Carrying charges from site to Co's workshop with to & fro.

Supply of Ceiling Fans complete with all accessories having the following Model Orient NEWBREEZE/ Crompton Aura 1200 mm , 48'' (1200 mm ) Sweep as per direction of EIC.

S & Replacing of 240V, Switch type 100 watt 1 module Fan Regulator as per direction of EIC. (Make- Legrand-Arteor-573616)

S & Replacing of 240V, Socket type 100 watt 2 module Fan Regulator as per direction of EIC.(Make- Legrand-Arteor-573663)

S & D of 240 V, 16" (450 mm) dia whole metal body metal blade Wall Bracket Fan (Make - EPC or equivalent) as per direction of EIC.

S & D of 240V, 450mm (18") Sweep, 1420 RPM Pedestal Fan [Make: EPC / Orient / Equivalent] as per direction of EIC.

S & D of 1420 RPM, 12" (300 mm) Exhaust Fan (EPC) as per direction of EIC.

Less Cost for unserviciable fan parts

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

MONDAL ELECTRICAL ASSOCIATES (BID ID -6042772)

ELEGANT POWER (BID ID -6042427)