SPECIAL REPAIR WKS TO 07 X GOVT MD ACCN NO 96/01 TO 96/07 MANDIR LINE OF SRI C/O STN HQ ROORKEE UNDER GE ROORKEE

Amount

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L in repair old decayed timber (including piecing, scarifying, etc of old and mew timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any height complete all as specified and directed.

M&L for minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using Epoxy Mortar and supplying and applying High performance hybrid polyurea elastomeric waterproofing coating cold applied of spray/brush applied, Dr Fixit liquid membrane with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min. 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying Dr Fixit Fastflex or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per Manufacturer specifications over and including padding of cement concrete Type B1, (1:2:4) (20 mm graded stone aggregate) 40mm average thick on RCC roof surfaces and all other similar works complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work complete all as specified and directed.

M&L for Designer ceiling board 4mm thick with GI framed work of size 4mm main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24xx24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, ceiling boards 60cmX60CmX4mm thick, suspended with GI wire 3mm dia and up to 2 mtr long complete incl plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

Taking down chowkhat or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

M&L for factory made 35 mm thick 100 % solid WPC window glazed and gauzed shutter 95x35 mm thick made from WPC material with density not less than 800 kg/cum. All four corners are fusion welded and screwed with 8 x 50 mm self screws for additional strength after joining all four corners clear spaced to be panspace to be paneled with 5 mm thick glass/stainless steel wire mesh after glazing of inside of shutter 10x12 mm PVC L shaped bead to be nailed or sticked with shutter. Provided 2 nos SS hinges of 100 mm, 02 nos aluminium handle of 125 mm 02 nos aluminium tower bolts of 125 mm and 01 peg stay for each shutter (Glazed and gauzed) incl factory made 100 % solid WPC window frame 125mm x65 mm double rebated frame and mullions 125 x80 mm, made from WPC (Single extruded process) material comprising of virgin PVC polymer of K value 57-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and nontoxic addihives fabricated with meter joints after applying PVC solvent cement and screwed with fully body treated star headed screws having minium frames density not less than 800 kg/cum having good screws holding capacity (screwed withdrawal strength of min 900 N) minium compresive strength of 58 N/mm 2 modules of elasity 900 N\mm2 and resstance to spread of flame of class A category with properity of being termite/bore proof water mositure proof and fire retradant and fixed in position with fasteners//hold fast of required size. Windows shall be provided with MS grill//gaurd bars made of 10 mm MS square bars welded to 6 x12 mm MS flat including painting with counter sunk holes at both ends, gaps between the bars should not be more than 125 mm/ All as per specification drawing or as directed by Engr-in-charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 100x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length and including Good Quality Aluminum Louvre Frame with Pulling Controls having 6 nos in each set two nos are required for each ventilators complete as per direction of Engineer-in-Charge.

M&L for providing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick with particle board core (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 800 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.

S&F 100 mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed.

S&F in repair Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed.

S&F 300mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.

S&F Stainless steel of AISI-304 grade barrel tower bolt 200 mm long, extruded section complete all as specified and directed.

S&F Stainless steel of AISI-304 grade barrel tower bolt 150 mm long, extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm size long complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of 140mm long complete all as specified and directed.

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height complete all as specified and directed.

M&L for proving cement concrete type B-1 (1:2:4) in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed.

M&L for PCC Cement concrete type B-2, (1:2:4) (40mm graded aggregate) 75 mm thick in floors complete all as specified and directed.

M&L for PCC (1:4:8), type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for providing cement concrete type B-1 (1:2:4) (20 mm graded aggregate) as in side of PCC tiles/interlocking tiles, bed blocks for hold fast and similar works complete all as specified and as directed.

M&L for crushed sand filling under precast interlocking paver blocks and all other similar works complete all as specified and directed.

M&L rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-40 Grade laid over sand cushning including compaction of paver blocks using surface vibrator all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, built in CM (1:6), straight or curved on plan exc 6m mean radius, complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L for providing 15 mm thick rendering with cement mortar (1:6) finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for providing 15 mm thick rendering with cement mortar (1:4) finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for providing rendering 10 mm thick in CM (1:3) as in ceiling concrete surface finish even and smooth of any description etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick wall putty complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new/old surfaces complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc primer eyc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

M&L rendering 10 mm thick plaster on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 600x300x7mm/450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shades of tiles, complete all as specified and directed.

M&L for non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm. in floors over 15 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified and directed.

M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non-skid vitrified heavy duty paver colour tiles 8 to 10 mm thick size 300x300mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc complete all as specified and directed.

S&F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc complete all as specified and directed.

S&F in repairs of Partial overlay/fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/ silver complete all as specified and directed.

S&F in repairs of stainless steel cabinet/drawers handle having a length of 250mm and shape complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with of flap 30mm complete all as specified and directed . (ISI Marked)

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

M&L for machine cut, polished cudappah stone work 18- 20 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) complete all as specified and as directed.

M&L for granite (of any approved colour) 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring, sill and all other similar works complete all as specified and directed.

ATT work of injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 literes per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

ATT work of injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

ATT work of injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

M&L in repair GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed.

M&L in repair GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceilling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed.

S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply complete all as specified and directed.

S&F in repair vitreous China squatting pan, 'Orissa patteren', size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F, PVC cabinate looking mirror 300x600mm complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or Cold unserviceable' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 550x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS brackets comple all as specified and as directed.

S&F in repairs stainless steel plate rack of oveall size 24x30x10" made out of 1 mm thick stainless steel sheet and fixed in position complete all as specified and directed.

S&F in repairs of 25 mm dia stainless steel fancy type curtain rod with and including stainless steel fancy type brackets stops in suitable size and necessary side caps etc complete all as specified and as directed

S&F structural work of hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062:2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, bent to any shape etc (cut to ordinary lengths i.e. within 20 mm of the length indicated) complete all as specified and as directed.

Dismantling of water tanks of any capacity and any type and removing to store complete all as specified and directed.

M&L 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve and tank cover (Ball valve make:- Prayag) and tank cover of hoisted and fixed in position all as specified in SSR Part I.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth complete all as specified and directed.

S&F in repair CP, soap dish complete all as specified and directed.

S&F 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 381 mm long Square shape with wall flange complete all as specified and directed.

S&F in repairs for stainless steel peg set of size 38x460x2 mm thick complete all as specified and directed.

S&F as in repair ss grating round 125mm size of anti- cockroach, anti-clog,anti faul etc complete all as specified and directed.

S&F sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with rubber beading, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F of aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs 110 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays upto 04 storeys including all steel scaffloding arrangments complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays upto 04 storeys including all steel scaffloding arrangments complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffold unserviceableing complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bends with access doors, any radius, at any height including steel scaffOld unserviceableing complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair fancy type, CP, Towel Rail, 61cm long complete all as specified and directed.

JAHANGIR CONTRACTORS (BID ID -3480866)

VIMAL CONSTRUCTION CO (BID ID -3485794)

IRFANAHMAD CONTRACTOR (BID ID -3490922)

M/S RAJESH ARORA (BID ID -3491215)

KOHLI BUILDERS (BID ID -3490315)

RAJENDER CONSTRUCTION CO (BID ID -3490510)

shreyansh construction (BID ID -3490904)