Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC 2076 2077 CHIRIMAR MOHALLA AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹44.6 L+₹1.6 L (3.63%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹48.0 L+₹4.9 L (11.4%)Rejected-Finance H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
11 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
SPL REPAIR TO SECURITY WALL AT K AREA INCLUDING CERTAIN SANCTIONED SPL REPAIR, REVENUE AND MINOR WORKS AT N AREA AND SEC 29D UNDER GE CHANDIGARH
2023_MES_623339_1
GE/CHD-56/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹99,800
Yes
13 Dec 2023
14 Oct 2023
13 Nov 2023
14 Oct 2023
11 Nov 2023
30 Oct 2023
14 Oct 2023 - 22 Oct 2023
Amount
Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed
All as per item No 1.00 above but exc 1.50m deep and not exc 3.00m deep and getting out in any type soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/loose soil complete all as specified.
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified.
M&L RCC M-25 design mix using 20 mm graded aggregate in foundation footing and raft like; any thickness; and buttresses complete all as specified.
M&L RCC M-25 design mix using 20 mm graded aggregate in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified.
Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified.
M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mmdia or securing with clips quality complete all as specified.
M&L for two coats cement base paint on newly plastered, undecorated surfaces of walls including preparation of new plastered surfaces complete all as specified.
Demolition of reinforced cement concrete of any description and in any poistion not otherwise specifically provided for complete all as specified and directed.
M&L for PCC 1:3:6 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
M&L brick work with fly ash sub class 'B' bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in copings, kneelers apex stones, bed plates, kerbs, water trough and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drain complete all as specified and directed.
S&F for Vitreous China white wash basin flat back of size 550x400mm including MS brackets, with CP waste coupling including cutting for and pinning in ends of brackets complete all as specified and directed by Engr-in-Charge.
Supply & fix for PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.
S&F for 15 mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified.
S&F for 15mm bore CP angle stop valve fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl elbow, socket, reducers etc., and making good as existing surface complete all as specified and directed .
S&F 16 mm CPVC SDR -11 brass elbow complete all as specified and directed
S&F 16 mm CPVC SDR -11 brass Tee complete all as specified and directed
S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed .
S&F 75 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp pipe 75 mm ,complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to floor, including taking down PVC complete all as specified and directed.
Supply & fix for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-charge.
Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and directed
Demolition and breaking up drain pipes, 150 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed
Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed
Demolition and breaking up drain pipes, 300 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 200 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 300 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.
M&L for providing reinforced concrete pipes , claps NP2 laid and jointed complete with collars 150 mm dia (internal) laid in trenches & jointed etc all as specified and as directed by Engr-in-Charge.
M&L for providing reinforced concrete pipes , claps NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc all as specified and as directed by Engr-in-Charge.
M&L for providing reinforced concrete pipes , claps NP2 laid and jointed complete with collars 300 mm dia (internal) laid in trenches & jointed etc all as specified and as directed by Engr-in-Charge.
Demolition of brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins, arches, pillers etc but excluding ashlar facing etc complete all as specified.
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified.
Material & labour for 15mm thick rendering on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, finished even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately).
Supply only liquid water proofing compound complete all as specified and directed.
Dismantling of cast iron/ reinforced concrete/PVC drain pipes, 100/75/50mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F for 110mm dia PVC rain water pipe, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F for 75mm dia PVC rain water pipe, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F for 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.
S&F for 75 mm PVC (SWR) tee junction any radius with acess door complete all as specified and directed.
S&F for 110 mm PVC (SWR) tee junction any radius with acess door complete all as specified and directed.
M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and directed.
M&L for non skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and in any pattern and shade/colour as directed by Engr-In-charge.
M&L for first quality, glazed ceramic, not less than group-III, straight cut/edge, colored tiles of size 300X450X7mm on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified.
S & F vitreous china wash down water closet (pedestal pattern) white with, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with 'P; & 'S' trap and including flush pipe complete all as specified and directed.
S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.
Cleaning of manholes of various size as follows including taking off manhole covers and re-fixing the same after cleaning, dewatering and desludging manually or mechanically removing the waste materials and sludge to a distance exceeding 100m and depositing where directed by Engineer-in-Charge in borrow pits .(The rates include labour for earth work /excavation and removal of surplus soil to a distance not exceeding 50 metres):- (a) Manholes exc 1.50 m depth but n exceeding 4 m depth.
M&L for providing precast RCC slabs in cement concret 1:2:4 type B1, 1:2:4: (20mm graded stone aggregate) as in manhole cover slabs (for manholes etc) of any size & thickness set in cement mortar 1:6. complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified.
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished) complete all as specified and directed.
S&F in repairs salt glazed stoneware gully traps, 150x150mm square or round mouthed, type P complete all as specified.
M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in floor/sub base complete all as specified and directed.
Demolition of cement concrete of any type and any thick and position complete all as specified.
M&L for framed work such as grills, gratings, sides of man hole covers etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.
M&L two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.
M & L for Cutting into existing manholes for connecting new drains, for 150mm dia pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified.
M&L factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and pigment,(in top layer),different colours, laid over and including 50mm thick fine sand cushioning and joint filled with fine sand complete all as specified and directed.
S&F factory made prepolished precast cement concrete vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.
Material and labour for factory made Precast RCC manhole covers with frame (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 1200mm x 450mm x 75mm with plain faces, including RCC ring / frame and MS frame 3mm thick , set in cement mortar 1:4 complete all as specified. MAKE: CEMOCRETE / VENUS / NTC.
Material and labour for factory made Precast RCC manhole covers with frame (type A-1, 1:1½:3, using 20 mm graded stone aggregates), of size 750mm x 750mm x 75mm with plain faces, including RCC ring / frame and MS frame 3mm thick, set in cement mortar 1:4 complete all as specified. MAKE: CEMOCRETE / VENUS / NTC.
Dismantling angle posts or struts (wood, steel or R.C.C.) any section embedded Concrete, brick work, masonry etc including taking out embedded portion and making good disturbed portion all as specified
Dismaintling barbed wire fencing, galvanised barbed fixed with steel post or wood fllets, if any etc, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings any thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed
M&L for providing, cement concrete PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) in fdn, filling, mass concrete, PCC Block for Steel Post etc including necessary form work complete all as specified.
Raking out joints/ pointing to brick work in brick masonry walls and flush pointing to brick wall in CM 1:4 complete all as specified.
M&L for preparation of newly plastered surface of walls and applying two coats of weather guard exterior emulsion paint (apex) over a coat of alkali resistant primer complete all as specified
S&F Joist, channel, angle, or tee sections, fixed independently by means of welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated and provn of grooves for barbed wire fencing) confirming Fe 410-W(Gde-E-250) quality B complete all as specified and directed
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed
M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
jaswant singh
MOHAMMAD RASHID
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .