Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹22.9 L+₹2.0 L (9.39%)Rejected-Finance 894 NEAR 132 KV POWER HOUSE SINDHARI ROAD BALDEV NAGAR BARMER RAJ 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹23.2 L+₹2.2 L (10.6%)Rejected-Finance H 10 KARNI NAGAR NEW NAGAUR ROAD NEAR MANDORE POLICE STATION 8TH MILL MANDORE JODHPUR 342304 | JODHPUR | JODHPUR | RAJASTHAN | 342304 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹23.7 L+₹2.8 L (13.2%)Rejected-Finance NAYA BASS MAHAMANDIR JODHPUR RAJASTHAN 342006 | JODHPUR | JODHPUR | RAJASTHAN | 342006 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹24.4 L+₹3.4 L (16.4%)Rejected-Finance SHOP NO 13 MOHINI MARKET KISHORE BAGH MANDORE JODHPUR RAJ | JODHPUR | RAJASTHAN | 342001 | L5 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | Anil Builders L4 | Shri Electrical Enterprises L3 | GITANSH ENGINEERS AND COMPANY L2 | MAA KARANI MATA CONSTRUCTION AND COMPANY L1 | SACHIYAY MAA ELECTRICALS L5 | M/S SUMAN ENTERPRISES L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Preventive maintance of Online UPS 3 Phase 415V 50Hz of capacity 10 KVA by skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified. | 3 | Each Job | 3,000 ₹9,000 | 3,000 ₹9,000 | 3,450 ₹10,350 | 2,900 ₹8,700 | 3,000 ₹9,000 | 1,500 ₹4,500 Lowest |
| 2.00 | Preventive maintance of Online UPS 3/1 Phase 415V 50Hz of capacity 5 KVA by skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified. | 2 | Each Job | 1,500 ₹3,000 Lowest | 2,300 ₹4,600 | 2,799 ₹5,598 | 2,350 ₹4,700 | 2,500 ₹5,000 | 1,500 ₹3,000 Lowest |
| 3.00 | S&F in replacement of UPS PCB Card for upto 10KVA Online three phase UPS complete all as specified. | 2 | Each | 6,800 ₹13,600 | 2,500 ₹5,000 | 4,500 ₹9,000 | 4,150 ₹8,300 | 5,000 ₹10,000 | 1,000 ₹2,000 Lowest |
| 4.00 | S&F in replacement of IGBT Driver suitbale for upto 10KVA Online three phase UPS complete all as specified. | 4 | Each | 2,100 ₹8,400 | 2,000 ₹8,000 | 1,950 ₹7,800 | 1,350 ₹5,400 | 2,500 ₹10,000 | 1,000 ₹4,000 Lowest |
| 5.00 | Preventive maintance of Online UPS 1 Phase 415V 50Hz of capacity upto 1 KVA by high skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified. | 2 | Each Job | 2,000 ₹4,000 | 750 ₹1,500 Lowest | 1,250 ₹2,500 | 1,150 ₹2,300 | 2,000 ₹4,000 | 1,000 ₹2,000 |
| 6.00 | S&F in replacement UPS PCB Card for 1 KVA Online singe phase UPS complete all as specified. | 1 | Each | 2,500 ₹2,500 | 1,000 ₹1,000 | 2,800 ₹2,800 | 2,450 ₹2,450 | 2,500 ₹2,500 | 800 ₹800 Lowest |
| 7.00 | S&F in replacement of IGBT Driver suitbale for upto 10KVA Online three phase UPS complete all as specified. | 2 | Each | 2,000 ₹4,000 | 1,500 ₹3,000 | 1,300 ₹2,600 | 950 ₹1,900 Lowest | 1,000 ₹2,000 | 1,000 ₹2,000 |
| 8.00 | Taking out old unsv light of any cap and supply, fixing Testing and Commissioning of ALL in ONE Solar LED Street Light Fixture of 40 Watt in Single Piece Extruded Aluminum Housing IP-65 IK , Including 6 Meter Hot Dip Galvanized Octagonal Pole as per Specifications mentioned below herewith. The All in One Solar LED Street Light Fixture must encases with Solar PV Panel of Capacity 60Wp Mono Crystalline at PSH 4hrs, Battery type and Size - 12.8V-24Ah (LiFePO4), Luminance Efficacy > 150 lumens/Watt , CRI > 70, Dimming Facility With PIR Sensor Which works as Follows - 1st 1 Hrs on motion 100% and without 25% brightness next 4 Hrs on motion 40% and without 25% brightness next 6 Hrs 25% irrespective of motion final 1 Hrs on motion 40% & without 25% (Till Dawn Condition). CCT - 5700 to 6500 K. The Charge controller cum driver Must be MPPT Charge Controller with silicon potted ( Potted Type ) with Efficiency (of the electronics) > 90%, Duty Cycle - Dusk to Dawn (12hours) and other safety features like - External switch (IP-66) to On/Off , Protections for reverse flow of current through the PV Module, Battery Overcharge & deep discharge cut off. The All in One Solar Street light Must be Mounted on 6 meter long hot dipped Galvanized OCTAGONAL street light pole. The bottom of pole shall be 130 mm dia and top shall be 70 mm dia with 3 mm thickness, high tensile strength conforming to BS EN 10025, Single Side Coupler / Arm Bracket of suitable size for Mounting Solar All in One Street Light Fixture, base plate shall be 220 x 220 x 12mm with 4 nos of anchor bolt 'J' type 700 mm long 20mm dia with nut washer and bolt. Make of Light and Make of Octagonal Pole should be same complete all as specified.
Make- Crompton Cat Part No. CSOP-839-40-57-HL5-PIRLM-PG or Equivalent of make mentioned in Appendix 'B'.
Note :- Excavation & PCC work shall be measured and paid separately under respective items of schedule. | 15 | Each | 42,000 ₹6,30,000 | 43,000 ₹6,45,000 | 39,000 ₹5,85,000 | 30,900 ₹4,63,500 Lowest | 38,000 ₹5,70,000 | 44,000 ₹6,60,000 |
| 9.00 | All as per Ser No 8 above but 30 Watt all in one solar light. Make- Crompton Cat Part No. CSOP-838-30-57-HL5-PIRLM-PG or Equivalent of make mentioned in Appendix 'B' | 10 | Each | 36,000 ₹3,60,000 | 41,000 ₹4,10,000 | 35,000 ₹3,50,000 | 29,900 ₹2,99,000 Lowest | 34,500 ₹3,45,000 | 38,500 ₹3,85,000 |
| 10.00 | Excavation in trenches in soft/ loose soil n.exc 1.5mtr wide and not exc 1.5mtr in depth and getting out complete all as specified. | 5.04 | Cum | 300 ₹1,512 | 200 ₹1,008 | 321 ₹1,617.84 | 309 ₹1,557.36 | 150 ₹756 Lowest | 200 ₹1,008 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Dec 2025, 6:00 pmClosed
Garrison Engineer, Banar
Garrison Engineer Banar, Jodhpur-342027
REPAIR AND MAINT OF OLD UPS OF VARIOUS CAPACITIES BATTERIES AND CONNECTED ITEMS AT TECH AREA AT NAGTALAO UNDER GE BANAR
2025_MES_743397_1
8825/73/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
BANAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer Banar
₹50,000
Yes
11 Feb 2026
6 Dec 2025
3 Jan 2026
6 Dec 2025
27 Dec 2025
20 Dec 2025
Amount
Preventive maintance of Online UPS 3 Phase 415V 50Hz of capacity 10 KVA by skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified.
Preventive maintance of Online UPS 3/1 Phase 415V 50Hz of capacity 5 KVA by skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified.
S&F in replacement of UPS PCB Card for upto 10KVA Online three phase UPS complete all as specified.
S&F in replacement of IGBT Driver suitbale for upto 10KVA Online three phase UPS complete all as specified.
Preventive maintance of Online UPS 1 Phase 415V 50Hz of capacity upto 1 KVA by high skilled trademan including cleaning of UPS panel with blower & tighting of all power and control terminations points, checking of complete wiring and repair the faulty portion with new wire/thimbles testing of UPS and to make it in functional condition complete all as specified.
S&F in replacement UPS PCB Card for 1 KVA Online singe phase UPS complete all as specified.
S&F in replacement of IGBT Driver suitbale for upto 10KVA Online three phase UPS complete all as specified.
Taking out old unsv light of any cap and supply, fixing Testing and Commissioning of ALL in ONE Solar LED Street Light Fixture of 40 Watt in Single Piece Extruded Aluminum Housing IP-65 IK , Including 6 Meter Hot Dip Galvanized Octagonal Pole as per Specifications mentioned below herewith. The All in One Solar LED Street Light Fixture must encases with Solar PV Panel of Capacity 60Wp Mono Crystalline at PSH 4hrs, Battery type and Size - 12.8V-24Ah (LiFePO4), Luminance Efficacy > 150 lumens/Watt , CRI > 70, Dimming Facility With PIR Sensor Which works as Follows - 1st 1 Hrs on motion 100% and without 25% brightness next 4 Hrs on motion 40% and without 25% brightness next 6 Hrs 25% irrespective of motion final 1 Hrs on motion 40% & without 25% (Till Dawn Condition). CCT - 5700 to 6500 K. The Charge controller cum driver Must be MPPT Charge Controller with silicon potted ( Potted Type ) with Efficiency (of the electronics) > 90%, Duty Cycle - Dusk to Dawn (12hours) and other safety features like - External switch (IP-66) to On/Off , Protections for reverse flow of current through the PV Module, Battery Overcharge & deep discharge cut off. The All in One Solar Street light Must be Mounted on 6 meter long hot dipped Galvanized OCTAGONAL street light pole. The bottom of pole shall be 130 mm dia and top shall be 70 mm dia with 3 mm thickness, high tensile strength conforming to BS EN 10025, Single Side Coupler / Arm Bracket of suitable size for Mounting Solar All in One Street Light Fixture, base plate shall be 220 x 220 x 12mm with 4 nos of anchor bolt 'J' type 700 mm long 20mm dia with nut washer and bolt. Make of Light and Make of Octagonal Pole should be same complete all as specified. Make- Crompton Cat Part No. CSOP-839-40-57-HL5-PIRLM-PG or Equivalent of make mentioned in Appendix 'B'. Note :- Excavation & PCC work shall be measured and paid separately under respective items of schedule.
All as per Ser No 8 above but 30 Watt all in one solar light. Make- Crompton Cat Part No. CSOP-838-30-57-HL5-PIRLM-PG or Equivalent of make mentioned in Appendix 'B'
Excavation in trenches in soft/ loose soil n.exc 1.5mtr wide and not exc 1.5mtr in depth and getting out complete all as specified.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, erecting of pole etc not exceeding 10 sqm on plan and getting out in hard rock by mechanical plant bor, chisel cutting complete all as specified.
Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified.
Material and labour for replacement of PCB Card for 110 V DC UPS complete all as specified.
Material and labour for replacement of PCB Card for 24 V DC UPS complete all as specified.
S & F in replacement of Street light nature switch (using infrared sensor technology) based automatic street light control panel. the panel should be suitable enough to take SIngle Phase load of 5 KW. Nature switch operation should be based on natural light Lux* level. required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 Lux. The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs. The sensor alongwith suitable one Nos power Contractors and one Nos incoming SPN of 40 Amp & 1 Nos outgoing SPN of 40 Amp & circuit wiring (Copper) of min 10 sqmm with lug should be enclosed in a pole/wall mountable rust proof, electric shock proff, termite proof and FR grade SMC elclosure confirming to IP 66. The circuit should also have provision for Manual operation (i.e. Sensor by Pass option).
Material and labour for replacement of Capacitor having capacity 20 mfd complete all as specified.
Material and labour for replacement of Single phase Rolling shutter copper motor having weighlifting capacity 400 kg ,power 200 W ,Output torque 280 N-M & Lifting height 6 meter complete all as specified.
Material and labour for replacement of Electromagnetic relay 240V AC,12 A ,28 V DC,8 Pin having cat part No NC68AF-2H or equivalent complete all as specified.
Material and labour for replacement of 65AH, 12V SMF - Sealed Maintenance Free battery suitable for 1 to 10 KVA UPS complete all as specified.
Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of Laundry Machine 30 kg capacity set complete ( Dismantiling laundry machines , cleaning completely all the parts and carrying out necessary repair, re-assembling and testing) complete all as specified.
Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of Laundry Machine Dryer 30 kg capacity set complete ( Dismantiling laundry machines , cleaning completely all the parts and carrying out necessary repair, re-assembling and testing) complete all as specified.
Material and labour for replacement of sealed, valve regulated lead acid maintenance free battery , 12 volt,12 AH suitable for upto 10 KVA UPS complete all as specified.
Material and labour for replacement of Elevated unidirectional Medium intensity Runway Taxiway lighting fixture for Taxi Track.Light weight Die cast aluminium alloy frangible body Stove enamelled aviation yellow Paint, with SS Hardwares,Strurdy and Non Corrosive construction with 8 W LED Lamp, complete with Blue Glass, lens clamping mechanism, blanking plate,breakable coupling, Neoprene Gasket etc complete as required. The entire Fitting shall be designed to withstand Heat and Jet blast forces complaint to FAA complete all as specified.
Material and labour for replacement of Elevated unidirectional Medium intensity Runway Taxiway lighting fixture for Runway light weight Die cast aluminium alloy frangible body Stove enamelled aviation yellow Paint, with SS Hardwares,Strurdy and Non Corrosive construction with 200 W Halozen lamp light , complete with white Glass, lens clamping mechanism, blanking plate,breakable coupling, Neoprene Gasket etc complete as required. The entire Fitting shall be designed to withstand Heat and Jet blast forces complaint to FAA complete all as specified.
Material and labour plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in base of the pole as a foundation&Coping or in any situation complete all as specified.
Material and labour for replacement of sealed, valve regulated lead acid battery , 2 volt,100 AH suitable for Battery Bank consisting of 110 Volt alongwith terminal connector, iron rack suitable for battery holding in three compartment and all other accessories as per technical specification complete all as specified.
Material and labour for replacement of lead acid long tubular maintenance free battery, 12 volt, 150 AH suitable for upto 10 KVA UPS complete all as specified.
GITANSH ENGINEERS AND COMPANY (BID ID -3509312)
Shri Electrical Enterprises (BID ID -3509331)
Anil Builders (BID ID -3509327)
SACHIYAY MAA ELECTRICALS (BID ID -3507039)
M/S SUMAN ENTERPRISES (BID ID -3509712)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
882573.rar
Tender Documents • 0.66 MB
BOQ_832409.xls
BOQ • 5.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .