Zilla Parishad 15th F.C PFMS(Tied)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH including contract profit 13.615%

Cutting open C.C. road surface with concrete saw cutter and removal with Breaker etc.

Stone dust Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH. including contract profit 13.615%

Plain Cement Concrete (1:4:8) using 40mm size HBG (SS5) metal from approved quarry (obtained by blasting) including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site for Foundations (APSS No. 402) including contract profit 13.615%

Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd Class for Basement.including contract profit 13.615%

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials and labour charges such as mixing, curing etc.,complete including contract profit 13.615%

Cost and supply of 225 mm dia RCC NP2 Class Socket and Spigot including all taxes etc. complete.including contract profit 13.615%

Lowering the RCC S/S Pipes carefully into the trench , laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing , the cost of jointing materials ,i.e., cement mortar (1:1.5) , hemp yarn etc. and testing including filling with water with a water lead upto 500 metres excluding cost of rubber rings as per BIS No. 783/85.including contract profit 13.615%

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for cover slab .including contract profit 13.615%

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded.including contract profit 13.615%

Construction of granular sub-base by providing well graded material (Table 400.1) with grading III material (HBG chips+stone dust) CBR Value not less than 15 and PI value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Static Road Roller 80-100 kN capacity to achieve the desired density, complete as per Technical Specification Clause 402 MORD.including contract profit 13.615%

Construction of un-reinforced Plain cement concrete pavement, thickness as per design, over a prepared CC Levelling Course with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, mixing in a concrete mixer and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel), laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing , spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction joints, admixtures as approved, curing of concrete slabs for 14- days and water finishing to line and grade as per drawing and Technical specification clause. 1501 including contract profit 13.615%

Fixing channels levelling the concrete with Beam vibrator vacume dewatering power trowelling to finish as per the directionof Engineerning incharge rate inclusive of labour charges all complete for finished iteam of workincluding contract profit 13.615%

Carrying cut groove cutting 75mm deep with petrol driven saw as per the directions of Engineer-in-Charge, rate including of labour charges, machinery charges all complete for finished item of work.including contract profit 13.615%

Cost and conveyance of Quarry rubbish filling for subgrade/ filling low lying portion including cost and conveyance of all materials, Seigniorage and stacking the material at site to the departmental gauge for premeasurments including all labour charges for spreading , watering and tamping , etc., complete .including contract profit 13.615%

Providing Inagutation stone of Telephone Black Granite 18-20 mm thick (Black) and carving letters upto 100 mm thick including all cahrges complete.including contract profit 13.615%