Repairing And Renovation Of Excisting Bulding Under Muncipal Corporation At Ghatlodiya Ward North West Zone

Sr. Qty Items Rate Per Amount Rs.

1 20 Excavation for foundation up to1.5 m depth 201.81 Cmt

including sorting out and stacking of useful

materials and disposing of theexcavated stuff upto

50 Meter lead.(A) Loose or soft soil (EXECUTED

WITH MANUAL LABOUR)

2 5 Excavation for foundation for depth from 1.5 m to 222.72 Cu.M.

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil (EXECUTED WITH

3 5 Excavation for foundation for depth from 1.5 m to 474.47 Cu.M.

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(C) Hard Murrum (EXECUTED WITH

5 15 Excavation for foundation for depth from 1.5 m to 270.83 Cu.M.

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(C) Hard Murrum (EXECUTED WITH

MECHANISED EFFORTS/MACHINARIES)

5 10 Filling available excavated earth (excluding rock) in 129.1 Cmt

trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm. in depth consolidation each

deposited layer by ramming and watering.

6 2 Filling in plinth with sand underfloors 455.63 Cmt

including watering ramming, consolidating and

dressing etc. complete.

7 1 Filling in foundation and plinth with murrum or 286.2 Cmt

selected soil in layers of 20 cm. thickness including

watering, ramming and consolidating etc.

8 1 Providing and laying cement concrete1:5:10 (1- 2492.51 Cmt

Cement: 5- coarses sand and:10-hand broken stone

aggregates 40mm nominal size) and curing complete

excluding cost of formworkin (A) Foundation and

Plinth (upto 10 ton).

9 1 Providing and laying cement concrete1:4:8 (1- 2653.67 Cmt

Cement: 4- coarses and:8-hand broken stone

aggregates 40mm nominal size) and curing

complete excluding cost of formworkin (A)

Foundation and Plinth (upto 10 ton).

10 2 Providing and laying cement concrete 1:3:6 (1- 2976 Cmt

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in (A) Foundation and

11 1 Providing and laying cement concrete 1:3:6 (1- 4006.15 Cmt

Cement:3-coarse sand:6-hand broken stone

aggregates 20mm nominal size) and curing

complete including cost of formwork in (A) wall

caps/coping (upto 10 ton)..

12 4 Providing and laying cement concrete work 1:2:4 (1- 3923.53 Cmt

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

concrete work in (A)

Foundations, footings, Base or columns and Mass

13 1 Providing and laying cement concrete work 1:2:4 (1- 4012.47 Cmt

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work in (B)

Slabs, landing, shelves, Balconis , Lintels, Beams,

Girders and Cantilever upto floor two level.

14 2 Providing and laying cement concrete work 1:2:4 (1- 4012.47 Cmt

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced

concrete work in (D)

Columns, Pillars posts and struts upto floor two

15 0 Provdg. & laying cement concrete 1:2:4 (1 cement : 2 6487.07 Cu.M.

coarse sand : 4 graded stone aggregates 20 mm

nominal size) for reinforced concrete chhajjas

not exceeding 10 cm. thickness upto floors two

level including finishing the exposed surfaces with

cement mortar 1:3 (1 cement : 3 find sand) to give a

smooth and even surface centering and form work

and curing complete excluding cost of

16 1 Providing and laying in position Ready Mixed M- 3790.21 Cum

150 grade concrete for reinforced cement

conctere work, using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work intransit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured as

per mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures

inrecommended proportions as per IS:9103 to

accelerate/ retard setting of concrete, improve

work ability without impairing strength and

durability as per direction of theEngineer-in-

charge. Without Fly Ash (Min cement level as per

latest IS456 shall be maintained) (Cement level

17 1.00 Providing and laying in position Ready Mixed M- 4793.1 Cum

200 grade concrete for reinforced cement

conctere work, using cement content as per

approved Design Mix manufactured in fully

automatic batching plant and transported to site

of work intransit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured as

per mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying, excluding

the cost of centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS:9103 to

accelerate/ retard setting of concrete, improve

work ability without impairing strength and

durability as per direction of theEngineer-in-charge.

Without Fly Ash (Min cement level as per latest IS456

shall be maintained) (Cement level 400 kg )

18 1.00 Providing and laying controlled cement concrete 3977.88 Cu.M.

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base ofcolumns

and Mass concrete

19 1.20 Providing and laying controlled cement 4484.17 Cu.M.

concreteM.200 and curing complete excluding the

cost of formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of oundation

level upto floor two level

20 1.00 Providing and laying controlled cement concrete 4558.2 Cu.M.

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts upto

floor two level.

21 1.00 Providing and laying controlled cement concrete 5418.91 Cu.M.

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (E) Staircases excluding landing

upto floor two level

22 1.00 Providing and laying controlled cement concrete 4701.97 Cu.M.

M.200 and curing complete excluding the cost of

formwork and reinforcement for reinforced

concrete work in (K) Vertical and Horizontial its

upto floor two level.

23 20 Brick work using common burnt clay building 3981.21 Cmt

brickshaving crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(B)

24 12.00 Extra for brick work in superstructure above plinth 272.25 Cmt

level upto floor two level (B) Conventional

25 5 Extra for brick work in superstructure above floor 39.79 Per Floor

two level Item No. 2(6.13) (B) Conventional Per Cum

26 15 Half brick masonry in common brunt clay building 583.49 Smt

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:5 ( 1- Cement :

coarse sand ) in foundation and Plinth conventional

brickwork (up to 10 ton)

27 10 Extra for half brick masonry in super structure 52.8 Smt

above plinth level upto floor two level (B)

28 1.00 Providing formwork of ordinary timber planking soas 171.68 Smt

to give a rough finish including centering uttering

strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the ame

for in situ reinforced concrete and plain concrete

work in. (A) Foundations Footings Bases of lumns

etc. and Mass concrete.

29 1.00 Providing formwork of ordinary timber planking soas 252 Smt

to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the ame

for in situ reinforced concrete and plain concrete

work in. (B) Flat surfaces such as soffits of pspened

floors slabs Landings and the like. loors etc. upto

200 mm in thickness.

30 1.50 Providing formwork of ordinary timber planking so 270.9 Smt

as to give a rough finish including centering

shuttering strutting and propping etc. Height of

propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain

concrete work in. (B) Flat surfaces such as soffits of

suspended floor roof slabs Landings and the like. (2)

Floors etc. above 200mm in thickness.

31 1.00 Providing and fixing 35 mm thick shutters for 3557.15 Smt

Doors, windows and clear story windows including

anodised alluminium butt hinges with necessary

screws. (A) Indian Teak Wood(iii) Partly panelled

and partly glazed.

32 1.50 Providing and fixing 35 mm thick panelled ,glazed or 3459.09 Smt

panelled and glazed shutters, for Doorswindows and

clearstory windows including anodisedalluminium

But hinges with necessary screws and indian teak

wood shutters with. (A) Plywood sheet

33 1 Providing and fixing 35 mm thick panelled ,glazed or 3406.53 Smt

panelled and glazed shutters, for Doors windows

and clearstory windows including anodised

alluminium But hinges with necessary screws and

indian teak wood shutters with. (D) Asbestos sheet

34 3 Providing and fixing 25 mm thick shutters for 3034.1 Smt

cupboards etc. including anodised alluminium butt

hinges with necessary screws. (A) Indian teak wood.

(i) Fully Panelled.

35 5 Providing and fixing 25 mm thick shutters for 2594.74 Smt

cupboards etc. including anodised alluminium butt

hinges with necessary screws. (A) Indian teak wood.

(ii) Fully Glazed.

36 2 Providing and fixing plain asbestos cement sheet 6 224 Smt

mm thick in partitions including fixing to fames with

screws etc, complete with 50 mm x 12 mm Deodar

wood beading (Frames to be paid separately) (upto

37 2 Providing and fixing in partitions 4 mm thick medium 328 Smt

hard board of approved quality including fixing to

fames with screws etc complete with 50 mm x

mm teak wood beading (Frames to be paid

separately) (upto 10 ton)

38 3 25 mm thick wooden shelves supported on 40 x 1360 Smt

40 mm x 6 mm T or L iron brackets fixed at

suitable distances but not exceeding 75 cm. apart

with Mango wood or equivalent quality. (upto

39 1 40 mm thick wooden shelves supported on 40 x 1810 Smt

40mm x 6 mm T or L iron brackets fixed at suitable

distances not exceeding 75cm. Apart with

Mango wood or equivalent quality. (upto

40 5 Providing and fixing M.S. round or square bars with 68.53 kg

M.S. flats at required spacing in wooden frames of

windows and clerestory windows.(upto10 ton)

41 15 Providing and fixing M.S. grills of required pattern to 100.17 kg

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square

or round bars with round headed bolts and nuts or

by screws (A) Plain Grill. (upto 10 ton)

42 3 Providing and fixing M.S. grills of required pattern to 143.64 kg

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square

or round bars with round headed bolts and nuts or

by screws (A) Ornamental Grill. (upto 10 ton)

43 180 Providing & Fixing M.S.Grill, Gate, Elevation Element 91 Kg

Of Decorative Pattern With M.S.Channel, Flat,

Medium Grade M.S.Pipe, Square Or Round Bars

With Round Heanded Bolts, Nuts, Or By Screw. Incl.

Applying One Coat Zinc Primer And Two Coat Of

Oil Paint Etc.Comp.

44 2 Providing and fixing glazed louvered glass 4102.54 Smt

windows and ventilators with teak wood frame

cm. x 7 cm. size including 3 coats of oil painting to

wood work etc.complete. (upto 10 ton)

45 1 Providing and fixing 35 mm thick shutters for Doors, 4595.06 Smt

windows and clere story windows including Indian

teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings

including primer coat of approved quality and two

coats of oil painting etc, complete.(ii) Fully Glazed.

46 0 Providing and fixing 35 mm thick shutters for Doors, 5285.45 Smt

windows and clere story windows including

Indian teak wood frames 10 cm x 7 cm. size including

black enamelled iron oxidixed fixtures and fastenings

including primer coat of approved quality and two

coats of oil painting etc, complete.(ii) Fully Panelled.

47 1 Providing and fixing 35 mm thick shutters for Doors, 4940.25 Smt

windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings

including primer coat of approved quality and two

coats of oil painting etc, complete. (iii) Partly

panelled and partly glazed.

48 5 Providing and fixing 30 mm thick FACTORY MADE 1135.02 Smt

SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S.tubes of 19 gauge thickness

and size of 19 mm x 19 mm for stiles and 15 mm x

mm for to p and bottom rails.M.S. frames hall have a

coat of steel primers of approved make and

manufacture, M.S. frames hall be covered with

mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm formings tiles, and 5 mm thick 75 mm

wide PVC sheets for to prail, lock rail and bottom rail

on either side, and 10 mm (5 mm x 2) thick, 20 mm

wide cross PVC sheet as gap insert for to p rail and

bottom rail, Panelling of 5 stiles and rails with

mm wide x 5 mm thick PVC sheet beading on

eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the

interiors ide of the ‘c’ channel using PVC

solventcement adhesive etc. complete as per

direction of Engineer incharge, manufacture’s

specification and drawing.

49 3 Providing and fixing in position collapsible steel 5391.23 Sq.M.

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonal 20 x6 mm size with top

and bottom rails T iron 40 x 40 x 6 mm with 38 mm

dia steel pulleys complete with bolts, units, locking

arrangements, stoppers, handles, including a priming

coat of red lead paint & approved make.

50 1.5 Providing and fixing 1 mm thick M.S. sheet sliding 3652.12 Sqm

shutters with frame and diagonal braces of 40x40x6

mm angle iron, 3.15 mm M.S.gusset plates at

Junctions and corners 25 mm dia. pulley,

40x40x6 mm angle and T-iron huide rail at top and

bottom respactively with handles, stoppers and

locking agangement etc, including applying a priming

coat of red lead paint. (upto 10 ton)

51 2 Providing and fixing rolling shutters of approved 3468.72 Sqm

make made of 80 mm wide M.S.laths inter-locked

together through their entire length and jointed

together at theends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and out

side locking with push-pull operation including the

cost of hood cover and spring etc. complete.

(A) Shutters having width below 3.5 M.

52 1 Providing and fixing rolling shutters of approved 4450.51 Smt

make made of 80 mm wide M.S.laths inter-locked

together through their entire length and jointed

together at theends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and out

side locking with push-pull operation including the

cost of hood cover and spring etc. complete.

(A) Shutters having 3.5 M. & Above

53 4 Providing & Fixing in position Alluminium doors with 2900 Smt

frame using approved quality anodised extruded

alluminium section as approved by Engg.in

charge(Jindal alluminium) (a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top

section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt)

(c) Shutter bottom section at 114.3x44.45 mm at

(1.37kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm

thick approved color Acrylic sheet of standard

quality fixed with glazing chips on upper pannel &

Laminated sheet on lower pannel (wtt.0.13

kg/Rmt) etc.comp.as direction of engg.in

54 2 Providing and fixing extruded aluminum window 2119.14 Sq. M.

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc

55 1 Providing & Fixing in position Alluminium vents with 1950 Sq. M.

frame using approved anodised extruded alluminium

section as approved by Engg. In charge.(Jindal

alluminium) units equivalent Approved Rate)Frame

section of 63.50 x 38.50 mm. (wt. 0.68Kg/Rmt) incl.

Providing & Installing 5 mmthick approved color

Acrylic sheet of standard quality etc. comp.

56 1 Providing and fixing standared extruded of 1163.92 Sq. M.

alluminium section of size 63 mmx38.10 mmx1.2 mm

(Jindal Section:2434, @ Wt.0.643 Kg/mt) with

colour anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete

for Ventilation

57 1 Providing and fixing standared extruded of 1815.14 Sq.M.

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour Powder

Coated alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as

details etc complete for Fix window.

58 1 Providing and laying 40 mm thick marble chips 515 Sqm

flooring rubbed and polished (I.E.terrazo) to

granolithic finish with under layer 30 mm thick

cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-

graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white, black

or white and blak marble cihps of required sizes

from 1 mm to 4 mm nominal size laid in cement

marble powder mix 3:1 (3- Cement:1-Marble powder

by weight) in proportion of 4:7 (4- Cement: 7-

marble chips by volume) (C) Medium

Shade pigment with approx 50% white cement and

50% ordinary cement (In top layer only) (upto

59 2 Providing and laying marble chips skirting (Terrazo) 869.4 Sqm

or dedo rubbed, and polished to Granolithic finish to

player 6 mm white, black or white and black marble

chips of size from smallest to 4 mm nominal size

laid in cement marble powder mix 3:1 (3-Cement:

marble powder by weight) in proportion of 4:7 (4-

cement marble powder mix: 7- marble chips by

volume) (B) Light shade pigment with white cement

(In top layer only)

60 15 Providing and laying white glazed tiles 6mm thick in 908.17 Sq.M.

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

61 15 Providing and laying Ceramic tiles 6 mm thick in 960.47 Sq.M.

flooring treads of steps and landing laid on a bed of

12 mm thick cement mortar 1:3 (1- cement :3-

coarses and) finishing with flush pointing in white

cement.(upto 10 ton)

62 10.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 1469.91 Sq.M.

36''x36'' in flooring treads of steps and landing laid

on a bed of 12 mm thick cement mortar 1:3 (1-

cement:3-coarses and) finishing with flush pointing

inwhite cement. (upto 10 ton)

63 15.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 1130.15 Sqm

24''x24'' in skrting risers of steps and dedo on 10 mm

thick cement plaster 1:3 (1- cement: 3-coarse

sand) and jointed with white cement slurry (upto

64 5 Providing and laying Vitrified tiles 8 to 10 mm thick, 1523.61 Sqm

in skrting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement:3- coarse sand) and

jointed with white cement slurry (upto 10 ton)

65 10 P & L 24" x 24" vitrified 8 mm thick tile flooring over 1261.58 Sq. M.

20 mm (average) base of cement mortar 1:6 (1

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

66 10 P & L 24" x 24" vitrified 8 mm thick tile flooring over 1383.99 Sq. M.

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

67 15 Providing and laying polished granite stone slab 18 2672 Sq.M.

mm thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement : 3 coarse

sand) and jointed with gray cement slurry including

rubbing & polishing etc. complete.

68 2 Providing and laying marble stone slab flooring over 2194.63 Sq.M.

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

1.5 - coarse sand) laid and jointed with gray cement

slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick

69 20 Providing and laying polished Kota stone slab 1085.48 Sq.M.

flooring over 20 mm (Average) thick base of cement

mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc.complete. (B)

mm thick (upto 10 ton)

70 5.00 Providing and laying polished kota stone slab 25 mm 1176.03 Sq.M.

thick in risers of steps, skirting Dedo and pillars laid

on 10 mm thick cement mortar 1:3 (1- Cement :3

coarses and) and jointed with gray cement

slury mixed with pigment to match the shade of

slab including rubbing and polishing etc.complete.

71 2 Providing and laying cement concrete flooring 297.68 Sq.M.

1:2:4 (1-cement: 2-coarses and:4-graded stone

aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (A)

40mm thick. (upto 10 ton)

72 0 Providing and laying cement concrete flooring 348.08 Sq.M.

1:2:4 (1-cement: 2-coarse sand:4-graded stone

aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B)

50mm thick. (upto 10 ton)

73 3 Providing and fixing pre-cast concrete kerb 358.06 Rmt

stone of gray cement based concrete block 30 cm

length, 30 cm height and 15 cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C:M 1:3 (1 cement :3 fine sand) etc

complete. (upto 10 ton)

74 0 Providing and fixing pre-cast Rubber Dye / steel Dye 680.1 Smt

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

75 10.00 Providing and laying broken china mosaic flooring 739.89 Sqm

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them up to15 cm along the wall, clearing with

water and oxalic acid etc .asdirected.

76 7 Providing and laying coloured glazed tiles of the 1426.95 Sqm

size 300 mmx200 mmx8 mm/300 mmx450 mmx8

mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1cement: 3 coarse sand)

& jointed with white cement slurry.

77 70 Providing corrugated G.I. sheet of class-3 roofing 719.93 Sqm

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8 mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses. (1) 0.80 mm thick sheet.(up to10 ton)

78 5 Providing ridges or hips 600 mm over allin plain G.I. 635.58 Sqm

sheet class-3 fixed with G.I. J or L Hooks and nuts

mm dia G.I. Limpet and bitumen washer complete.

79 2 Providing and fixing 150 mm wide 450 mm over all 555.71 Sqm

semi circular plain G.I.sheet class-3 gutter with Iron

brackets 40 mmx3 mm size Bolts, Nuts, washers

etc. including making necessary connection with

rain water pipes. (i) 0.80 mm thick

80 2 Providing and fixing on wall face C.I. Rain water pipe 283.62 Rmt

including filling the joints with spun yarn soaked in

neat cement slurry and cement mortar 1:2(1-

Cement : 2-fine sand) (A) 75 mm dia.

81 500.00 Providing 15 mm thick cement plaster in single coat 174.83 Sqm

on Rough (Similar) side of single or half brick walls

for interior plastering up to floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-

cement :3-sand)

82 45 20mm thick sand faced cement plaster on walls upto 297.68 Sqm

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

83 100 Colour washing with lime on wall surface (two coats) 12.29 Sqm

over and including a primary coat of white washing

to give an even shade after through brooming the

surface to remove all dirt, dust, mortar drops and

other foreigh matter.

84 70.00 Removing dry or oil bound distemper by a 11.19 Sqm

washing and scraping and sand papering the wall

surface smooth including necessary repairs to

scratches complete.

85 75.00 Distempering with dry distemper of approved brand 46.94 Sqm

and manufacture (two coats) and of required shade

on wall surfaces of given an even shade, over

and including a priming coat of whiting after

thoroughly brooming the surface free from mortar

dropping and other foreign matter.

86 30 Distempeing (Two coats) with oil bound distemper 76.08 Sqm

of approved brand and manufacture and of

required shade on wall surfaces to give an even

shade, over and including a priming coat with

distemper primer of approved brand and

manufacture after thoroughly brushing the

surface free from mortar dropping and other

foreign matter and also including preparing the

surface even and sand papered smooth.

87 10 Extra Coat for Above Item over above for every 30.09 Sqm

subsequent coat of approved brand and

88 45 Wall painting (two coats) with plastic emulsion 78.44 Sqm

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

89 15 Extra over item for every sub sequent coat of wall 33.39 Sqm

painting with plastic emulsion paint of approved

90 45 Extra over item for painting with plastic emulsion 5.36 smt

paint of approved brand on ceilings and sloping

91 30 Applying priming coat over new steel and other 34.34 Sqm

metel surface after and including preparing

the surface by throughly cleaning, oil, grease, dirt

and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

92 50 Painting two coats (excluding priming coat) on 86.94 Sqm

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

including cleaning the surface an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.

93 30 Painting one coats (excluding priming coat) on 54.35 Sqm

previously painted steel and other metal surface

with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.

94 15 Extra over item for every sub sequent coat of paint. 50.4 Sqm

95 25 Painting two coats (excluding priming coat) on 64.66 Sqm

new steel and other metal surface with synthetic

enamel paint, brushing to give an even shade

including cleaning the surfaceofalldirt,dust and other

foreign matter.

96 52 Painting one coats (excluding priming coat) on 43.79 Sqm

previously printed steel and other metal surface with

synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust

and other foreign matter.

97 5 Extra over Above item for every sub sequent coat 43.47 Sqm

98 5 Painting two coats (excluding priming coat) on 20.16 Sqm

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dustand

other foreign matter.(75 mm dia)

99 4 Painting two coats (excluding priming coat) on 25.05 Sqm

external surface of new rain water, soil, waste and

vent pipes and fittings with ready mixed

bituminous brushing, black, anti corrosive to give

an even shade including cleaning of all dirt, dust and

other foreign matter.(100 mm dia)

100 3 Appliying priming coat over new wood and wood 40.17 Sqm

based surface after and including preparing the

surface by throughly cleaning oil, grease, dirt and

other foreign matter, sand papering and knotting.

(B) Ready mixed paint brushing wood primier pink.

101 3 Appliying priming coat over new wood and wood 40.17 Sqm

based surface after and including preparing the

surface by throughly cleaning oil, grease, dirt and

other foreign matter, sand papering and knotting.

(C) Ready mixed paint brushing priming for enamel

102 2 Extra over item 59 for every subsequent coat of 36.39 Sqm

priming coat. (B) Ready mixed paint brushing wood

103 1 Extra over item 59 for every subsequent coat of 36.39 Sqm

priming coat. (C) Ready mixed paint brushing

priming for enamel

104 10 Painting two coats (excluding priming coat) on 87.11 Sqm

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to give

and even shade including cleaning of all dust, dirt

and other foreign matters and papering and

105 50 Finishing wall with weather proof exterior emulsion 113.4 Sqm

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

106 50.00 Applying two coats of Birla (white cement based) or 40.19 Sqm

Asian (acryliclapy-putty) or equivalent & two coats of

primer of approved brand and manufacture on new

wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

107 5 Writing letter or figures on any surface with black 3.15 per letter

japan paint (stops, comas, hyphens and the like not per

to be measured and paid for separately) (i) Block Cm/Ht

(Letters/Figures) (Per 10 Letter pet CM.HT)

108 0 Extra over items for using thick white paint instead 0.07 per letter

of black japan paint. (i)Block (Letters/Figures) per

109 5 Writing letter or figures on any surface with black 3.47 per letter

japan paint (stops,comas, hyphens and the like not per

to be measured and paid for separately) (ii) Indian Cm/Ht

(Letters/Figures)

110 0 Extra over items for using thick white paint instead 0.07 per letter

of black japan paint. (ii) Indian (Letters/Figures) perCm/Ht

111 3 Painting lines, deashes, arrows, letters etc on roads, 121.91 Sqm

Air fields and like in two coats with road marking

paint, brushing including cleaning the surface of all

dirt, dust and other foreign matter. (i)Over 10cmi n

112 2 Painting lines, deashes, arrows, letters etc on roads, 12.14 Rmt

Air fields and like in two coats with road marking

paint, brushing including cleaning the surface of all

dirt, dust and other foreign matter.(ii) Upto 10 cm in

113 0 Painting lines, deashes, arrows, letters etc on roads, 50.4 Sqm

Air fields and like in one coats with road marking

paint, brushing including cleaning the surface of all

dirt, dust and other foreign matter. (i)Over 10cm in

114 0 Painting lines, deashes, arrows, letters etc on roads, 5.52 Sqm

Air fields and like in one coats with road marking

paint, brushing including cleaning the surface of all

dirt, dust and other foreign matter. (ii) Upto 10cm in

115 1 Demolition including stacking of serviceable 1047.38 Cu.M.

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

116 2 Demolition of Brick work and stone masonry 544.95 Cu.M.

including stacking of serviceable materil as and

disposalof unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

117 11 Dismentaling tiled of stone floors laid in mortar 47.25 Sqm

including stacking of serviceable materil as and

disposal of unserviceable materials with all lead and

118 5 Dismentaling of sheet roofing including ridges, 47.25 Sqm

Hips, Valleys, Gutters etc. stacking of serviceable

materil as and disposal of unserviceable

materials with all lead and lift.(i) G.I.sheet roofing.

119 5 Dismentling steel work including distempering and 3.63 Kg.

stacking the materials with all lead and lift.

120 2 Dismentling doors, windows, ventilators etc. (wood 185.85 Each

or steel) shutters including chowkhats architraves,

hold fasts and other attachment etc. complete and

stacking the material within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

121 2 Dismentling doors, windows, ventilators etc. (wood 248.85 Each

or steel) shutters including chowkhats

architraves,hold fasts and other attachment etc.

complete and stacking the material with in all lead

and lift.(ii) Exceeding 3 Sq.M.in area.

122 20 Dismentling barbed wire in fencing including making 66.15 Rmt

rolls and also including dismentling fencing posts

including all earth work concrete in base and

making good the disturbed ground stacking

useful materials as directed and disposing as

directed and disposing of the unserviceable

materials with all lead and lift.

123 5 Dismentling C.I. pipes G.S.W. pipes abd A.C. rain 74.03 Rmt

water pipes with fittings and clamps including

stacking the materials with all lead and lift (for any

124 5 Dismantling santtary fittings like wash basin . W.C. 401.63 Each

pan Indian and Europe an type, flushing tank etc.

including stacking the materials with all lead and lift

125 20 Scraping oil paint from steel and other metal surface 48.83 Smt

and making the surface even (with Hand

126 10 Removing and scraping of old deteriorated plaster 19.38 Smt

of any thickness from wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

127 1 Providing and fixing M.S. fan clamps of shape and 168.53 Each

size as specified in existing R.C.C. slab including

cutting chase and making good.

128 1 Cutting out cracks of roof terrace to V-section, 64.58 Rmt

cleaning out, wetting, grouting with cement and

sand slurry 1:3 (1-cement 3-sand ) (upto 10 ton)

129 1 Cutting out cracks roof terrace to V-Section cleaning 75.29 Rmt

out and filling solidly with a hot mixture of bitumen

and clean dry sand (1:1 by weight) (up to 10 ton)

130 3 Providing and fixing of Ridge flashing for roof panel 688.28 Sqm

shall be made out of 0.5 mm thick pre coated GI

sheet. The Pre coatedsheet shall be of minimum

240 mpa steel grade confirming to IS 14246:1995

and shall have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns epoxy primer

on both side of the sheet and polyester top coat 15-

18 micron. The PP GI Sheet shall have plastic

protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge

shall be fixed to the steel members by

poprivetor self drilling/self stitching fastners @

maximum 450mm c/c along length of

capping/flashing etc complete .

131 15 Providing and fixing 1.20 Metre high fencing with 385.4 Rmt

2.0 Metre long M.S. Angle posts 40 mm x 40 mm x

mm and oil painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg. per

100 Metre, strained and fixed to posts with G.I,

staples including fixing the posts in ground with

M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

132 25 Renovation and Repairing work in Chainlink fencing 735 Rmt.

any size and also refixing work incl. febrication

work with all materails to be painted one coat of

primer and twocoats of paint as directed inline and

133 2 Constructing a sink (chowkedi) with C.C. 1:2:4, 12 2235.66 Rmt

cm. thick over B.B. masonry in C.M, (1:6) in front and

dwarf wall 1.0 Mt. high and 23 cm. thick cement

plaster to masonry / in C.M.1:3) and cement

concrete flooring in 1:2:4: mix 5cm.dia.drain pipe

134 1 Constructing a cooking platform 60 cm. width and 70 933.98 Rmt

cm high resting on B.B. Masonry walls 23 cm. thick

in C.M. (1:6) with (i) Fixing or precast R.C.C. 1:2:4)

cm. thick slab with marble chips set in C.M. (1:6) (6

mm thick terrazo) with plastering on exposed faces

walls in C.M. (1:4) etc complete.

135 30 Carring out timber treatment to all wood work 54.98 Smt

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labour and material etc.

complete. Using Chlordene 20 EC. As Per

6113_part III Consentration Weight1.00 percent is

recommended one litre chemical emulsion dillute

with 9 liter of kerosene precent

concentration. Total dillute concrentration will be

10 litre inclusive of the litre chemical emulsion

appication 0.75 / Litre chemical per one Sqmt

printed two coat wood surface.

136 2.5 Applying general insecticide pest control treatment 88.4 Smt

to floors, cup boards etc including labour

material etc. complete. Using Heptachloride 20 EC.

As Per 6113_pests Consentration Weight

percentis recommended one litre chemical emulsion

dillute with 39 liter of water will give. Total dillute

concrentration will be 40 litre inclusive of one

litre chemical emulsion appication 0.5 Litre

chemical / Sqm of surface is recommended as per I.S

137 30 Carring out plinth treatment to post construction / 104.9 Smt

existing structure by spraying chemical solution for

termite control treatment including labour and

material consist ment with I.S. specification.

Using Chlordene and Chior purfiles 20 EC. As Per

6131_paret-II Consentration Weight on percentis

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1% concrentration inclusive of one

litre chemical emulsion appication attherate of

5 Litre chemical / Sqm of surface is recommended as

138 10 Carrying out wall treatment for termite control 37.34 Smt

including spraying with chemical solution in oil

base (0.5 Lit./Sq.M.) including labour and material

Using Hepachlor concentration 20 EC. As Per

IS.6316_paret-II Consentration by Weight

percentis recommended i.e one litre chemical

emulsion dillute with 39 liter go fIS concrentration

total dillite concentration will be 40 litre inclusive of

one litre chemical emulsion appication at the rate of

7.5 Litre chemical / Sqm of surface is recommended

139 600 Providing erecting and fixing double coated ISI 3.91 Litre

water tank of required capacity each with all

necessary fittings and connection etc. complete on

140 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.

A 3 (A) 15mm (upto 10 ton) 244.13 Rmt

B 2 (B) 20mm (upto 10 ton) 297.25 Rmt

C 2 (C) 25mm (upto 10 ton) 393.93 Rmt

D 2 (D) 32mm (upto 10 ton) 491.51 Rmt

E 2 (E) 40mm (upto 10 ton) 596.73 Rmt

F 1 (F) 50mm (upto 10 ton) 779.6 Rmt

141 0 Providing and laying in trenches galvanised mild

steel tubes (Midium grade) of the following

nominal bore, and tube fitting (Earth work in

trenches to be measured and paid for separately)

5 (A) 15mm (upto 10 ton) 150.91 Rmt

2 (B) 20mm (upto 10 ton) 190.97 Rmt

2 (C) 25mm (upto 10 ton) 279.39 Rmt

2 (D) 40mm (upto 10 ton) 421.12 Rmt

2 (E) 65mm (upto 10 ton) 716.66 Rmt

2 (H) 80mm (upto 10 ton) 910.69 Rmt

142 1 Making connection of galvanised Mild steel 600.08 Each

distribution branch with galvanised mild steel main

50 mm to 80 mm nominal bore by providing and

fixing tee including cutting and threading the pipes

143 0 Providing and fixing to wall ceiling and floor 6.0

Kg.F/Cm2 working pressure poluthene pipes of the

following out side Dia. Low densidy, complete

with special falnge compression type fittings,wall

clips etc.including making good the wall ceiling and

144 Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy, complete

with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling and

2 (C) 32mm 116.4 Rmt

145 1 Providing and fixing cast iron (Spun) Nahni trap of 600.08 Each

the following nominal diameter of self cleaning

design with C.I. screaed down or higned grating

including cost of cutting and making good the walls

and floor 100 mm inlet and 50 mm outlet.(C)100mm

146 2 Providing and fixing water closet squatting Pan 926.1 Each

(Indian type W.C.Pan) size 580 mm (Earth work,

bed concrete, foot rest and trap to be measured

and paid for separately) (A) Vitreous China. (I)Long

pattern = White colour

147 1 Providing and fixing wsh down water closet (Europe 1290.8 Each

an type, W.C.Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar1:1

(1- Cement:1-fine sand) (Seal and cover to be

measured and paid forseparately) (A) vitreous China

Pattern :(i) in white colour

148 2 Providing and fixing 100 mm size P or S trap for 311.85 Each

water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar1:1

(1-Cement : 1-Fine sand)(A) Vitreous China.Pattern in

149 2 Providing and fixing wash basin with single hole for 1400.18 Each

pillar tap with C.I.or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings. (A) Vitreous China: (ii) Flat

Back wash basin 550 mm x v 400 mm size.(i) In white

150 1 Providing and fixing Kitchen sink with C.I. or M.S. 2257.69 Each

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. © Vitreous China Sink. (i) 600 mm x

mmx 150 mm size

151 2 Providing and fixing 600 mm x 450 mm bevelled 825.48 Each

edge mirrror of superior glass mounted on 6 mm

thick A.C. sheet or ply wood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

152 1 Providing and fixing chromium plated brass half 261.16 No.

trun flush cock of approved quality including fixing

in pipe line etc. complete.(ii) 25mm dia.

153 1 Providing and fixing C.P. brass towel rail comlete 597.22 Each

with C.P.brass brackets fixed to wooden plugs with

C.P. brass scews.(B) 600mm x 20mm size.

154 1 Providing and fixing 600mm x 120mm glass shelf 561.03 Each

with C.P. brass bracket and guard rail complete

mixed to wooden plug with C.P. brass screws.

155 2 Providing and fixing toilet paper holder. (A) 414.53 Each

156 3 Providing and fixing screw down bib taps of 184.98 Each

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia.

157 1 Providing and fixing screw down bib taps of 212.68 Each

following size.(A) Brass screw down bib tap polished

bright. (ii) 20mm dia.

158 1 Providing and fixing screw down bib taps of 184.98 Each

following size.(B) Brass chromium plated screws

down Bib Tap. (i) 15mm dia.

159 1 Providing and fixing screw down bib taps of 212.68 Each

following size.(B) Brass chromium plated screws

down Bib Tap. (ii) 20mm dia.

160 3 Providing and fixing screw down bib taps of 157.29 Each

following size.(C) Gun metal screw down bib tap.

161 1 Providing and fixing screw down bib taps of 176.09 Each

following size.(C) Gun metal screw down bib tap.

162 1 Providing and fixing pillar tap, capstan head, screw 305.67 Each

down high pressure with screws, shanks and back

nuts. (i) 15mm dia

163 2 Providing and fixing pillar tap, capstan head, screw 351.18 Each

down high pressure with screws, shanks and back

nuts. (ii) 20mm dia.

164 2 Providing and fixing Gun metal check or non-return Each

fullway wheel valve.

165 3 Providing and fixing Gun metal check or non-return 184.98 Each

fullway wheel valve.(A) 15mm dia.

166 3 Providing and fixing Gun metal check or non-return 201.8 Each

fullway wheel valve.(B) 20mm dia.

167 3 Providing and fixing Gun metal check or non-return 416.47 Each

fullway wheel valve.(C) 25mm dia.

168 1 Providing and fixing Gun metal check or non- 311.61 Each

returnfullway wheel valve.(D) 32mm dia.

169 2 Providing and fixing Gun metal check or non- 656.86 Each

returnfullway wheel valve.(E) 40mm dia.

170 2 Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing in

pipe line etc. complete.

171 2 Providing and fixing chromium plated brass half 252.26 Each

trun flush cock of approved quality including fixing

in pipe line etc. complete.(i) 20mm dia.

172 2 Providing and fixing chromium plated brass half 261.16 Each

trun flush cock of approved quality including fixing

in pipe line etc. complete.(ii) 25mm dia.

173 2 0 Providing and fixing chromium plated brass half 273.03 Each

trun flush cock of approved quality including fixing in

pipe line etc. complete.(iii) 32mm dia.

174 2 Providing and fixing Urinal or approved quality 1026.01 Each

including conecting the Urinal with waste pipe , tap

etc.complete. (A) White earthen ware flat back or

corner type size 430mm x 260mm x350mm.

175 3 Providing and fixing Urinal of approved quality 1535.63 Each

including connection with trap and with integral

longitudinal flush pipe. (A) Squating plate pattern

white earthen ware 550mm x 300mm.

176 2 Providing and fixing chromium plated, bottle trap 292.87 Each

with necessary couplings of approved quality for

177 2 Providing and fixing ball cock ofapproved quality as 131.57 Each

directed. (A) Copper Metal (i) 25mm dia.

178 1 Providing and fixing ball cock of approved quality as 101.89 Each

directed. (B)Abonite (i) 25mm dia.

179 30 Providing laying and jointing in true line and level 15 71.93 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with solvent, including cost of all

materials.adhesive

180 15 Providing laying and jointing in true line and level 25 90.93 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX orequivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

181 5 Providing laying and jointing in true line and level 32 117.97 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

182 5 Providing laying and jointing in true line and level 40 146.65 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

183 3 Providing laying and jointing in true line and level 50 193.73 Rmt

mm dia. U.P.V.C. Pipe (SCH-40) for cold water

including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

184 12 Providing in line level plumb, fabricating and fixing 390 Rmt

three row horizontal barbed wire fencing and

punched tape concertina coil of 9 turns per meter of

610 mm dia fixed with clips on top of the angle iron

posts. The punched tape concertina coil having sharp

barbs at every 25 mm spacing shall be 0.5 mm thick

and 19 mm width and weighting 13 kg/100 mt.

(Average) as per manufacture's specification. The

rate shall also include providing and fixing

mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c

spacing embaded in RCC column, angle posts shall be

painted with one coats of red oxide and two coats of

enamel paint of approved quality at top compound

185 5 Providing & Fixing 3 mm thick F.R.P.sheet of 1930 SqM

Approved Quality & Color / Pattern as per

Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size

using hollow pipe of16 gauge & size 2"x1" & 1"x1"

,G.I. & Bitumen Washers, Silicon paste application

for fixing the sheet . Rate also includesnecessary

bending, cutting, labor charges , Zinc Primer coat &

Two coats of oil painting of color as approved by

consultants & making good the wall. (N.S.)

186 1 Providing 2 mm thick F.R.P. Gutter with necessary 400 Rmt

M.S. Supporting Brackets. (N.S.)

187 1 Providing & Supplying JCB Machine on rental basis in 600 Hrs.

case of emergency situation and break down type

work & also during unavoidable condition as per

instruction of engg.incharge , rate includes all nece.

shifting, fuel and operating charges and stacking of

useful & non-useful materials separately up to store.

(No payment should be allowed for non working

condition of machinery and for pipe line excavation

and laying work) ( Based on Previously approved rate

188 2 Providing & Fixing Door closer - complete of 474.58 No.

Approved make to wooden / Aluminium Doors as

per direction of engg. In charge.

189 2 Providing and fixiing M.S. Fan clamps type 1 of 16 124.74 No.

mm dia M.S. bar bent to shape with hooked ends of

R.C.C. slabs during laying incl. painting the exposed

protion of loops, all as per standard design complete.

190 42 Providing cement vata (10cm. x 10 cm. size) quarter 23.45 Rmt

round in cement mortar 1:1 including neat cement

finishing, watering etc. complete.

191 2 Providing and Fixing 1 H.P. Electrical monoblock or 6800 Set

submarcible water pumps withmotor and required

cable and switch board of approved brand and make

etc.comp.as directed.

192 700 Providing TMT Bar FE 415 reinforcement for R.C.C. 66.59 Kg.

work including bending, binding and placing in

position complete upto floor two level

193 20 Conveyance charge of Earth,Lime, Murrum, building 235.51 Cu.M.

rubbish earch manure or sludge and excavated rock

and fly ash,aggregate of any kind etc.comp.upto

194 4 Providing and laying polished granite stone slab 18 2690 Smt

mm thick in risers of steps, dedo and pllars laid on

mm thick cement mortar 1:3 (1 cement:3 coarse

sand) and jointed with gray cement slurry including

rubbing & polishing etc.complete.

195 10 P/M/F chainlink jali 8'x4' size as per details sketch & 1230 Rmt

instructionof engineer in charge same as lal darwaja

garden pattern consisting of 3'dia. M.S black pipe 'A'

class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of

9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with

MS flat of size 25x3 mm welded jali etc.comp.The jali

is to be welded to MS pipe with MS flat as

instruction given.The M.S pipe and the M.S angle

frame are to be painted one coat of primer and two

coats of paint as directed in line and level. (N.S)

196 5 Supplying and fixing of 300 mm-L x 150 mm-B x 380 393 Rmt

mm-H Kerb block for Footpath in M-20 grade using

20 mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork , mould

with well equipped with vibratory system for kerb

stones of approved design including curing, etc.

complete, including the cost of formwork etc.

complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding

with necessary equipments and materials. The rate

shall also include the flush pointing in CM (1:3) for all

joints of the kerbstones. Filling of zari alone the sides

of the kerb stone fixed with Bituminous concrete

Bituminous concrete / C.C. mixed in proper position

to flush with the road surface as directed by

Engineer in change to form a portable mixture.

197 15 Providing and Laying of Rubber Moulded Paver Block 429 Smt

Grey/Coloured 60 mm thick, M-35 Grade of any size

shape (Usually Uni-Paver Blocks) using black trap

good quality aggragate of 20 mm nominal size for

footpath,parking areas, service lanes and other areas

as mentioned in the drawing / instruction of

engineer in charge. Cost includes formworks using

rubber mould, Rate providing and laying paver

blocks as per required grading and specification. The

paver block shall be mechanically compacted. The

work of paving blocks shall be executed in line and

level by skill mason of flooring work only. It should

be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block

necessary then it should be cut by machine only and

carting. The finished surface of the paver block shall

have resonably good, plain finished. Paver blocks

shall be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be allowed

for production. Laying on 5 cms thick sand

198 15 Labour work for fixing interlocking blocks / any kind 78 Smt

pavement on up to 50 mm th sand bedding,

watering and fixing in line & level as well cleaning

site etc.comp. as directed.

199 Box type metal letters forming composite box made

from 1mm thick stainless steel plate of grade

having brush finish of following font size to be fixed

at Main Gate in english and or Gujrati and including

fixing charges approved before fixing by clent /

A 0 400mm high 1000 Nos.

B 0 300 mm high 750 Nos.

C 0 230 mm high 565 Nos.

200 2 Provdg. & laying S.W. Gully trap with brick masonry 1279.4 No.

chamber & water tight G.T.Stone including fixing of

covervSquare mouth trap 100 mm x100 mm size P-

201 2 Providing and laying (to level or slopes) and jointing 211.05 Rmt.

with stiff mixture of Cement Mortar in proportion

1:1 Salt glazed stoneware pipes including testing of

pipes and joints complete.(A) 100mm dia.

202 2 Providing and laying (to level or slopes) and jointing 288.23 Rmt.

with stiff mixture of Cement Mortar in proportion

1:1 Salt glazed stoneware pipes including testing of

pipes and joints complete.(B) 150mm dia.

203 1 Constructing brick masonry chamber for 2903.89 Each

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

204 0 Constructing brick masonry chamber for 3624.51 Each

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i)Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

205 10 Providing, supplying and fixing precast C.C. blocks (M- 219 Rmt.

20) edge kerb having size of 75 x 300 x 300 mm

depth and as per design conveying it to the site,

jointing into C:M 1:3 and racking out the joints incl.

necessary excavation of asphalt, soil etc..completed.

206 2 Providing and fixing PVC Printed pain colour false 766 Smt

ceiling with grid type with alluminium frame

consisting of 600mm x 600mm 3mm thick plain PVC

sheet used as panel insert in a frame work made

using anodized alluminium T section of size 1 x

(235 x 25mm, 19 gauge or 1 mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm) The

alluminium frame work is supported from the

cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level

etc. The aluminium frame work is supported on side

wall with the use of alluminium L section of size 1 x1

(25 x 25mm) angles etc. complete as per direction of

Engineer in charge. Manufactures specification and

207 Providing and supplying of labour for necessary

manual excavation, cleaning, Shifting of Material Or

any other, or for any other work as directed by

Engineer In charge. The Rate includes Handcart with

A 7 Labour charges - Mazdoor (As per Amc Circular no-4 497.50 EACH

B 1 Labour charges - Supervision for Machinery 711 EACH

C 1 Fitter/Plumber/Mason 697 EACH

D 1 WELDER/ Gas cutter at Day /night 689 EACH

208 6.00 Up to 0.30 meter (By any type of Breaker Machine or 200 SMT

R.C.C.Cutter machine including cost of operator, fuel,

& transportation etc complete.

209 2 0.30 meter & above (By any type of Breaker Machine 350 SMT

or R.C.C.Cutter machine including cost of operator,

fuel, & transportation etc complete.

210 1 CatchPit Jali Fixing P/F FRC catch pit jali with frame 1383.9 No.

600mm x 600mm clear opening etc. comp. As

directed by engineer in charge. (Based on Central

211 Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. Nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.

A 3 15 MM DIA 165.21 Rmt

B 3 20 MM DIA 202.97 Rmt

C 1 25 MM DIA 247.25 Rmt

D 1 32 MM DIA 330.36 Rmt

E 1 40 MM DIA 437.66 Rmt

F 1 50 MM DIA 647.3 Rmt

212 1 Supplying and fixing C.I. cover 300mm x 300mm 491.8 Each

without frame for Gulley trap (Standard pattern) te

weight of cover to be not less 4.53 Kg.)

213 0 Providing and fixing to wall ceiling and floor

10.0Kg.F/Cm2 working pressure polythene pipes of

the following out side Dia. Low densidy, complete

with special falnge compression type fittings,

wall clips etc. including making good the wall ceiling

214 10 Providing and fixing sheet glass, selected quality 1176.1 Smt

(Type-C) bedded in putty and fixed with teakwood

and necessary cutting of glass. (2) 6 mm thick.

215 10 Providing and fixing rough cast wired glass, 6mm 559.26 Smt

thick bedded in putty and fixed with wooden

beading including the cost of wooden beadings of

Indian teak wood and necessary cutting of glass. (C)

Wired - figured glass

216 0 Providing and supplying ISI Standard RCC pipes (of

sulphate resisting Cement )in standard lengths of

following class and diameter suitable for rubber ring

joints (socket and spigot) including all

taxes,insurance, transportation,treight

charges,octroi,inspection charges, loading,unloading,

conveyance to departmental stores, stacking etc.

complete (GWSSB SOR 2022-23)Class NP3 Test

pressure 0.7 Kg/Sq.Cm

a 3 300 mm dia 755.00 Rmt

217 Lowering, laying and jointing R.C.C. pipes in C.M.1:1

1/2 of following diameters in proper position , grade

and alignment at all level as directed by Engineer-in-

charge including conveyance from stone to site of

work, labour giving hydraulic testing as per ISI code.

(item no.11a ,GWSSB SOR 2023-23)NP3

218 Providing and supplying ISI marked only standard

length Stonewate pipes in standard lengths of

following class and diameter including all

taxes,insurance, transportiton, fright charges,

octroi,inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

complete (item no.11 ,claas A,IS - 651 - 1989)(GWSSB

5 100 mm 113 Rmt

3 150 mm 163 Rmt

2 200 mm 252 Rmt

2 230 mm 299 Rmt

219 0 Lowering, laying and jointing stone ware pipes of

following diameters with cement joints in C.M.1:1

proportion in proper position , grade and alignment

at all level as directed by Engineer-in- charge

including conveyance from stone to site of

work,Jointing material etc.comp.(item no.12,GWSSB

220 0 Constructing Chamber of following size including

excavation, refilling, BBCC (1:5:10) for foundation,

C.C.Channel (1:2:4), finished 15 mm thick cement

plaster inside in CM 1:3, finishing with cement slurry,

Brick masonary in CM 1:5 & excluding the cost of

chamber seat cover etc..completed.

2 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to 2533 No

0.90meter for pipe dia <=150 mm.

1 0.60 X 0.75 mt. size Inside Clear, Depth from 0.0 to 3219 No

0.90meter for pipe dia <=20 mm.

2 0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to 4374 No

1.20 meter for pipe dia <=20 mm

221 Constructing Slab Type M.H. Chamber Of The

Following Size Including Excavation, Refilling, Brick

Bats Cement Concrete (1:5:10) of thickness 15 C.M.,

CC Channel (1:2:4)of thickness 10 C.M., finished

mm thick cement plaster inside & outside (Only for

shaft) In Cm 1:3, Finishing With

Cement Slurry, P/F 4 Mm Dia M.S.Steel Hdpe Coated

Steps 35 Cm C/C At 35 Cm Staggered Masonary In

Cm 1:5, Rcc Slab In Cc1:1.5:3 of thickness

C.M.,Including Cantering & Reinforcement (Single

jalli at 15 C.M. c/c

bothway 10 mm dia.)But Excluding The Cost Of

Manhole Seat Cover Etc..Completed Of Size 0.75 X

1.00 Meter (Inside Clear, M.H. length should be

parallel to the flow) (Based on Drainage SOR 2009-

0 1.00 to 2.00 meter depth, (Slab at Ground level) (for 6330 No

pipe dia <=230 mm)

222 0 Making connection to the ex. M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be well

repaired as per instructions. etc..complete.

1 a. 150 mm to 300 mm dia. 1500 No

0 b. 400 mm to 600 mm dia. 2500 No

223 0 Cutting the pipes of following dia coming in the new

M.H.in running sewer including cutting bars,

including removing debris /silt from the M.H. and

carting at a suitable distance etc..complete as

directed. No payment for M.H. work will be made

until pipe is not cut completely in all respect.

(Based on Drainage SOR 2009-10)

1 150 mm to 300 mm dia. 1270 No

224 0 Repairing damaged M.H. and rasing M.H. up to road

level incl. removing damaged brick work and

repairing by brick masonry in C.M. 1:5 and plaster in

C.M. 1:3 and fixing C.I.steps and existing MH sheet

cover, removing the debris from MH and carting the

same as directed. (Based on Drainage SOR 2009-10)

1 (A) up to 0.15 mt. (@ Two Coarse) 820 No

1 (B) up to 0.35mt. (@ Four Coarse) 1300 No

0 (C) up to 0.65 mt. (@ Seven Coarse) 2010 No

0 (D) up to 0.90 mt. (@ Ten Coarse ) 2420 No

225 3 Repairing damaged I.C./ Raising removing damaged 450 No

brick work and repairing by brick masonry in C.M.

1:5 and plaster in C.M. 1:3 and fixing C.I. steps and

existing chamber sheet cover, removing the debris

from chamber and carting the same as directed.

(Based on Drainage SOR 2009-10)

226 2 Lettering and lettering charges and printing 2000 No.

Muni.corporation symbol with help or skilled artist

including colour costst.

227 1 Prismatic grade reflective sheeting with super high 3600 Smt.

performance durable ,micro prismatic material

confirming to type XI as per ASTM-D 4956 -09 &

Cutting , pesting letter according to IRC standard in

dual language with micro prismatic material

confirming to type XIsmatic confirming to type XI

228 2 Extra for providing and mixing water proofing 48.67 per

material in Cement concrete in mix proportion Quintal

recommended by the manufacturers.

229 3 Non reflective solar contact film for fixing on glass. 402.54 Sq.mt.

230 5.00 Rapairing Of Door & Window (Wood).It Also 150.00 No.

Including Labour Charges For Erection And

Fixing Door Shutter & Frame Etc.And Necessary

Repair As Per Site Condition.(N.S.) I00375

231 10.00 Repairing of Doors/Windows shutters and Frames 300.00 No.

including refixing-aligning shutter, providing,

replacing, fixing MS hinges, Aluminium aldrops,

stoppers, tadi etc. complete excluding painting as

per specifications.(app.rate)

232 2.00 Supplying electric breaker machine for RCC slab or 1071.42 PER SHIFT

asphalt demolishing work on site by using operator,

fuel, power supply etc.complete as directed. (no

payment should be allowed for non working

condition of machinery and for pipe line excavation

and M.H. work. Allowed only for break down work)

(Based on Previously approved rate by CE sir )