Sarkari Kanya Chhatralay At Balvantpura,Ta.- Himatnagar, Dist.- Sabarkantha

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

1 Dismentling doors, windows, ventilators etc. 47.00 191.85 No

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area.

2 Dismentaling tiled or stone floors laid in mortar 117.50 49.18 Smt

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

3 Filling in foundation and plinth with murrum or 322.70 294.38 Cmt

including watering, ramming and consolidating

etc. complete.

4 Porviding & fixing Grill in gap of window by using. 61.10 1500.86 Smt

Angle section L35 x 35 x 5 & G.I..S.T.jali of

gauge wire having gap of 1" x 1" fixed with angle

by flat of 25 x 6 mm incl. priming coat & two coats

of oil painting including. All labour etc. complete.

5 Providing and fixing 35 mm thick shutters for 54.00 3403.77 smt.

Doors, windows and clear story windows including

anodised alluminium butt hinges with necessary

screws. (A) Indian

Teak Wood (ii) Fully Glazed.

6 Provoding and fixing flush door shutters, solid 15.20 1829.74 Smt

core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels, including anodised

alluminium butt hinges with necessary screws. (B)

Non-decorative type and block board core

anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

7 Providing & fixing openable Double shutter 18.80 3202.71 smt

pivoted door as per detail drawing with Anodized

Aluminium standard extruded hollow section

20102 for frame 101.60 X 44.45 X 2.5 mm @ wt

1.979 kg/mt & shutter section 19516 size 53.7 X

44.45 X 3 mm @ wt 1.238 kg/mt anodized

Aluminium of approved colour with 5 mm thick

transparent float glass using of transparent silicon

gasket with fixed transparent glass, SS fixture &

fasting etc complete as per instruction of

Engineer in charge & approved make. Door - DW.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

8 Providing and laying white glazed tiles 6mm thick 42.90 950.53 Smt

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand ) finishing with flush pointing in

white cement.

9 Providing and laying coloured glazed tiles of the 74.60 1487.88 Smt

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3(1 cement :

coarse sand) & jointed with white cement slurry.

(Type-C) bedded in putty and fixed with wooden

beading including the cost of wooden beadings of

first class teakwood and necessary cutting of

glass. (1) 5 mm thick

11 Providing and fixing washbasin with single hole 6.00 1683.32 Nos

for pillar tap with C.I. or M.S. brackets painted

white including Rubber plug, sutting holes and

making good the same but excluding fittings and

also including rate of C.P. brass waste for

washbasin or sink (A) 32mm dia. and M.I. fisher

union for washbasin or sink. (A) 32mm dia.; (A)

Vitreous China:(ii) Flat Back washbasin 550 mm x

v 400mm size. (i) In white colour.

12 Steel work, welded in built up sections framed 1550.00 91.08 Kg.

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

13 Providing and fixing Godrej type steel cupboards 59.80 13130.00 Smt

in wall with steel frames and shutters using

gauge M.S. steel sheel including necessary

fixtures, fastening like kocks handles, hinges with

approved shade of sparay painting etc. comp. as

14 Providing laying and jointing in true line and level 85.00 148.12 Rmt

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

15 Providing laying and jointing in true line and level 130.00 91.84 Rmt

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.

16 Providing laying and jointing in true line and level 50.00 72.65 Rmt

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.

17 Constructing brick masonry chamber for 10.00 2932.93 No.

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x+C17 610mm intenal dimensions

total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

18 Wall painting (two coats) with plastic emulsion 2269.70 82.97 Smt

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and

sand papered smooth.

19 Distempeing (Two coats) with oil bound washable 5691.80 75.43 Smt

distemper of approved brand and manufacture

and of required shade on wall surfaces to give an

even shade, over and including a priming coat

with alkali resistance primer of approved brand

after thoroughly brushing the surface and other

foreign matter and also including preparing the

surface even and sand parpered smooth.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

20 Finishing wall with water proofing cement paint of 3386.90 139.00 Smt

on wall surfaces (Two coats) to give an approved

brand and manufacture and of required shape

even shade after thoroughly brushing the surface

to remove all dirt and remains of loose powered

materials.Finishing wall with weather proof

exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after

thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials etc

21 Providing and fixing 1.20 Metre high fencing with 82.00 391.93 Rmt

2.0 Metre long M.S. Angle posts 40mm x 40 mm

x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c.

with five Horizontan lines and two diagonals of

galvanised steel barbed wire weighting 9.38 Kg.

per 100 Metre, strained and fixed to posts with

G.I, staples including fixing the postsin ground

with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10

etc complete.

22 Painting two coats (excluding priming coat) on 452.60 68.57 Smt

new steel and other metal surface with synthetic

enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and

other foreign matter.

23 Painting two coats (excluding priming coat) on 100.30 110.46 Smt

new wood and wood based surface with ready

mixed paint, brushing, oil, gloss, semi gloss to

give and even shade including cleaning of all

dust, dirt and other foreign matter sand papering

and stopping.

24 Excavation for foundation upto 1.5 m depth 27.30 122.99 Cu.mt.

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil

25 Providing and laying cement concrete 1:2:4 (1- 5.30 3757.61 Cu.mt.

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

26 Brick work using common burnt clay building 15.10 4245.09 Cu.mt.

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Conventional

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

27 Providing and laying ordinary cement concrete 3.50 7454.03 Cu.mt.

1:2:4 (1- Cement 2- coarse sand : 4- graded

stone aggregates 20 mm nominal size) exposed

wotk with curing etc. complete inclduing the cost

of formwork but excluding the cost of

reinforcement for RCC wotk in (iii) Slab having

more than 10 cm and upto 13 cm. thickness

28 Providing TMT Bar FE 415 reinforcement for 245.00 68.33 Kg.

R.C.C. work including bending, binding and

placing in position complete upto floor two level

29 Providing and laying Anti skid Ceramic tiles 6mm 6.40 994.37 Sq.mt.

thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement.

30 Providing and laying Colour Ceramic tiles 6mm 27.70 1090.32 Sq.mt.

thick in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

31 Providing and laying Mirror polished Green 18.00 3213.82 Sq.mt.

marble 16 mm thick for For Doors /windows sill &

Jams Cladding as per design incl. Half roulded

round edges on 10 mm thick cement mortar 1:3

(1 -cement : 3 coarse sand ) jointed with grey

cement slurry including rubbing and polishing etc.

32 Providing and fixing window having extruded 0.40 1705.65 Sq.mt.

aluminum colour Powder coated section frame

main outer size 63.50 x 38.10x 1.95mm (of Jindal

section no. 4605@ Wt. 1.094 Kg/Rmt), horizontal

two track member size 61.85mm x 31.75mm x

1.20mm (of Jindal section no. 8687, @ Wt.

Kg/mt),vertical member of size 61.85mm

x31.75mm x 1.30mm (of Jindal section no.

@ Wt. 0.659 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm

(of Jindal Section No. 8949 @ Wt. of

Kg/mt), vertical member of size 40mm x 18mm x

1.29 mm (of Jindal section no: 8947 @ Wt. of

0.456 kg / mt / section 8948, @ Wt. 0.457 kg/mt)

with 5 mm th transparent bronze colour tinted

float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

33 Providing and fixing 30mm thick FACTORY MADE 2.10 2236.14 Sq.mt.

SOLID BOTH SIDE PRELAM PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes

of 19 gauge thickness and size of 19mm x 19mm for

stiles, top and bottom rails. M.S. frame shall have a

coat of steel primer of approved makde and

manufactures. M.S frame covered with 5mm thick heat

moulded prelim PVC ‘C’ channel of siz 30mm

thickness, 70 mm width of which 50mm shall be flat

and 20mm shall be tapered in 45 degree Angle on

either side forming stiles, and 5mm thick, 95mm wide

pream PVC sheet out of which 75mm shall be flat and

20mm shall be tapered in 45 degree on the inner side

ot form top and bottom rail and 115mm wide prelim

PVc sheet out of which 75nmm shall be flat and 20mm

shall be tapered on both side to form lock rail, Top,

bottom and lock rails shall be provided either side of

the panel. 10mm (5mm x 2) thick 20mm wide cross

PVC sheet shall be provided as gap insert for top rail

and bottom rails. Panelling of 5mm thck both side

prelim PVC sheet to be fitted in the M.S. frame

welded,sealed to the stiles and rails with 7mm (5mm +

2 mm) thick x 15mm wide PVC sheet beading on inner

side, and joined togeth with solvent cement adhesive.

An additional 5mm thick PVC strip of 20mm width is to

be stuck on the interior side of the ‘C” chanel using

PVC solvent adhesive etc. complete as per direction of

Engineering in charge, manufacture’s specification and

34 Providing and fixing 90 cm high Stainless steel 26.00 3760.33 Rmt.

railing made from anticorrocive 304 grade S S

pipe of 50 mm dia (16Gauge) as hand rail with S

S 304 grade Baluster of 38 mm dia (16Gauge) as

a vertical support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of 16 mm dia

(16Gauge) at eqal distance fixed including

accessories as per detailed drawing as directed

etc complete.

35 Providing 15 mm thick cement plaster in single 38.40 184.78 Sq.mt.

coat on fair side brick / concrete wall for interior

plastering up to floor two level and finished even

and smooth in (i) cement mortar 1 : 3 (1 cement :

3 sand) for Ground Floor

36 20 mm. thick sand faced cement plaster on wall 55.20 321.10 Sq.mt.

up to height 10 Meters above ground level

consisting of 12mm thick backing coat of C.M. 1 :

3 (1 cement : 3 sand) and 8 mm thick finishing

coat of C.M. 1 : 1 (1 cement : 1 sand) etc.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

37 Providing and fixing washbasin with single hole 1.00 1519.50 Nos.

for pillar tape with C.I. or M.S. brackets painted

white including cutting holes and making good

thesame but excluding fittings. (A) vitreous china :

II. Flat back washbasin 550 mm x 400 mm size (I)

IN white colour

38 Providing and fixing Urinal of approved quality 1.00 1619.12 Each

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

39 Pro. & Fix. wash down water closet (European w. 1.00 2402.79 Nos.

c .pan) with integral "P" or "S" trap and PVC

flushing cistern with a pair of C.L.I. Or Mild steel

Brackets, complete with fittings such as lead

valve siphon, 15 mm. Nominal size brass ball

valve with polythene float, C.P. Brass handle

unions and couplings for connections with inlet,

outlet and over flow pipes, 40 mm. dia. flush bend

including cutting holes in walls and making good

the same connecting the flush bend with cistern

and closet etc comp incl plastic sheet cover, Jet

spray heavy duty with S.S. Braided hose 60 cm

long including jointing trap with pipe in cm 1:1 (a )

Vitreous china in white or color {Hindustan, Cera,

Parryware or equivalent }

40 Providing and fixing 600 mm x 450 mm bevelled 1.00 859.41 Nos.

edge mirror of superior glass mounted on 6 mm

thick A.C sheet or plywood sheet or PVC framing

and fixed to wooden plugs with C.P brass screw

abd washers.

41 Providing and fixing toilet paper holder.(A) C.P. 1.00 427.99 Nos.

42 Providing and fixing C.P. brass towel rail comlete 1.00 616.42 Nos.

with C.P. brass brackets fixed to wooden plugs

with C.P. brass scews.(B) 600mm x 20mm size.

43 Providing and fixing Screw down Quarter turn bib 4.00 186.83 Nos.

taps of following size (A) Brass chromium plated

screw down Bib tap (I) 15 mm dia {Plumber,

Mark, Esco equivalent brand}

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

44 Providing and fixing CP brass Quarter turn pillar 1.00 308.73 Nos.

tap, capstan head screw down high pressure with

screw, shanks and back ndts (A) 15 mm dia

{Jaquar, Plumber, Mark Long pipe}

45 Providing and fixing CP brass stop cock of 4.00 205.83 Nos.

approved quality 15 mm size with adjestable wall

46 Providing and fixing chromium plated brass half 2.00 254.78 Nos.

trun flush cock of approved quality including fixing

in pipe line etc. complete.(i) 20mm dia.

47 Providing erecting and fixing Tripple Layer 500.00 8.08 Liter

coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings

and connection etc. complete on terrace.

48 Providing and fixing to wall ceiling floor 6.0 Kg. 3.00 280.23 Rmt.

F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following

outside dia. low density, complete with necessary

fittings ,wall clamps etc including making good the

wall ceiling and floor. {Finolex, Supreme, Prince

or equivalent brand} (F) 75mm dia

49 Providing and fixing to wall ceiling floor 6.0 Kg. 6.00 339.05 Rmt.

F/Cm2 working pressure polythene pipes for soil

waste and ventilating pipes of the following

outside dia. low density, complete with necessary

fittings ,wall clamps etc including making good the

wall ceiling and floor. {Finolex, Supreme, Prince

or equivalent brand} (G) 110mm dia

50 Providing and fixing gun metal check or non 3.00 420.63 Nos.

return full way wheel valve (A) 25 mm Dia

51 Providing and fixing gun metal check or non 3.00 663.43 Nos.

return full way wheel valve (B) 40 mm Dia

52 Providing and fixing PVC SWR Nahni trap IS 1.00 586.60 Nos.

14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

53 Providing and fixing S.W. Gully trap with C.I. 1.00 1246.92 Nos.

Grating brick masonary chamber and water tight

C.I. Cover with frame of 300 mm. X 300 size

(inside) with standard weight (I) Square mouth

traps (C) 150 mm. X 100 mm size p or R type

54 Constructing brick masonry chamber for 2.00 3660.76 Nos.

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions

total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm

and 450mm deep for pipe line with one or two

55 Providing and Fixing "U" shape hand rail (Cera) 2.00 4242.00 Nos

for handicap toilet as per engineer incharge

instruction

56 Providing and Fixing Vertical Grab bar (Cera) for 1.00 2777.50 Nos

handicap toilet (as per engineer incharge

instruction

57 Providing and construction 3.00 mt inner dia and 1.00 81927.16 Nos.

6.50mt deep sock pit including excavation BBCC,

Brick masonary work at bottom and top including

RCC Slab at top in honey combica masonary in

mud goober as directed.

58 Providing Septic tank of size 4.95x198x2.00 mt. 1.00 76460.00 Nos.

depth including necessary excavation and 23 cm

thick brick masonary in CM 1:6 and horizental

portion with bottom concrete 1:5:10 and 40 mm

thick IPS and 15 mm thick inside plaster 12 cm

thick cc 1:2:4 slab with two manhole cover

including connection with sockpit and other

sanitary items.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

59 Applying general insecticide pest control 6.10 80.62 Sq.mt.

treatment to floors, cupboards etc including

labour material etc. complete. Using

Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is

recommended one litre chemical emulsion dillute

with 39 liter of water will give. Total dillute

concrentration will be 40 litre inclusive of one litre

chemical emulsion appication 0.5 Litre chemical /

Sqm of surface is recommended as per I.S

60 SIGNAGES ON WALL 3.00 1010.00 Nos.

Providing, Fabricating & Fixing wall signage's

using 304 grade Stainless steel brushed steel

finish plate of 1.5 mm thick fixed on a wall using

s.s studs including punched (laser cut) lettering

carried out on s.s plate of required size and text

as directed by Engineer over the S.S plate etc.

complete.Size:(45 cm x15 cm)

61 Filling in foundation and plinth with sand in layers 6.20 481.80 Cu.mt.

of 20 cm. Thickness including watering ramming

and consolidating etc. comp.

62 Providing and laying water proofing treatment 4.40 1079.65 Sq.mt.

with china mosaic tiles flooring over avgas 40 mm

C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Gritt

6 to 12 mm size} bedding for maintaining slope

for plain and curve surface & 12 mm to 20 mm of

broken piece of white glazed tiles to be laid over

cement mortar bedding of C M 1:3 (1 cement :

sand ) contain one Kg of water proofing materials

per bag of O P C at plain or / and slops and to be

tempered to bring mortar ceramic up to surface

with usingwhite cement and colour pigment

including rounding of junctions and extending

them up to 15 cm along the wall and curing with

bends any patens or design as per drawing and

cleaning by using oxalic acid etc complete.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

63 Point wiring by Point wiring for Light / Bell with 30.00 582.77 Pts

2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.(f) with medium

class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III

64 Point wiring for FAN with 2-1.5 sq.mm & earth 10.00 809.01 Pts

wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan

regulator mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed..(f) with medium class

Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III

65 Providing & erecting following type of Modular 10.00 27.27 Nos.

Type Accessories with necessary connection. As

desired by Engineer In charge (1) 6 Amp. SP one

way switch

66 Providing & erecting following type of Modular 5.00 51.51 Nos.

Type Accessories with necessary connection. As

desired by Engineer In charge (2) 16 Amp. SP

one way switch

67 Providing & erecting following type of Modular 5.00 82.82 Nos.

Type Accessories with necessary connection. As

desired by Engineer In charge (3) 6/16Amp.

Universal socket

68 Providing & erecting following type of Modular 10.00 42.42 Nos.

Type Accessories with necessary connection. As

desired by Engineer In charge (4) 6 A socket

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

69 Providing & Erecting following Shockproof tissino 150.00 31.31 Nos.

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden

Box. erected on wall/ ceiling. (1) One no Single

pole 6 A Switch / Bell push

70 Providing & Erecting following Shockproof tissino 75.00 31.31 Nos.

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden

Box. erected on wall/ ceiling. (2) One no 3/5 pin

71 Providing & Erecting following Shockproof tissino 25.00 47.47 Nos.

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden

Box. erected on wall/ ceiling. (3) One no Single

pole 16 A Switch

72 Providing & Erecting following Shockproof tissino 25.00 47.47 Nos.

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden

Box. erected on wall/ ceiling. (4) One no 6/16 A

Universal Socket

73 Providing & Erecting following Shockproof tissino 75.00 219.17 Nos.

type accessories erected on 3 mm thick PC

(Polycarbonate) sheet in PVC/ Metal/Wooden

Box. erected on wall/ ceiling. (14) Electronic Hum

free EME Socket Type Steps Fan Regulator

74 Providing and erecting ISI mark Medium class 210.00 33.33 Mtrs.

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (b)

75 Providing & erecting PVC Corrugated Flexible 45.00 21.21 Mtrs.

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes. (2) 25 mm

76 Supplying and laying UPVC cable trunking 20.00 428.24 Mtrs.

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and flame

proof confirming BS with necessary end caps

Internal and external bend, flat bends, coupler,

tee etc..All necessary accessories and measuring

of following sizes (2) 100 mm x 50 mm trunking

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

77 Providing and erecting Mains with 1.1 KV grade 141.00 104.03 Mtrs.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

78 Providing and erecting Mains with 1.1 KV grade 120.00 226.24 Mtrs.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (g) 4 wire 4 sq. mm

79 Providing and erecting Mains with 1.1 KV grade 80.00 326.23 Mtrs.

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (h) 4 wire 6 sq. mm

80 Providing and erecting Mains with ISI marked, 90.00 115.14 Mtrs.

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (f) One

wire 10.00 sq. mm

81 Providing and erecting Mains with ISI marked, 30.00 295.93 Mtrs.

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (h) One

wire 25.00 sq. mm

82 Supplying and erecting Flexible PVC insulated 120.00 58.58 Mtrs.

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed. e) 1.50 Sq.mm 3 core round PVC

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

83 Providing & erecting Switch board for Computer 5.00 1133.22 Nos.

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/ metallic /white

front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III

84 Supplying and erecting LED indoor fittings with 150.00 295.93 Nos.

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

wattage capacity between the ranges shown.) (A)

Tube Light with integral/ non-integral driver . (iii)

18-20 Watts, Surge - 2kV,IP-20, conventional

feet Cat III

85 Supplying and erecting LED street light / Flood 3.00 2843.15 Nos.

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V, Power Factor more than

0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer

between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (i) 36 - 47 watts Cat-III

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

86 Supplying and erecting LED street light / Flood 10.00 6177.16 Nos.

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V, Power Factor more than

0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.

(fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings. The Engineer

between the ranges shown.) (B) Flood Light (IP-

65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (iv) 90 - 119 watts Cat-III

87 Providing and erecting Approved make Four pole 3.00 8861.74 Nos.

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

88 Providing and erecting Miniature circuit breaker 11.00 297.95 Nos.

single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

89 Providing and erecting Miniature circuit breaker 30.00 123.22 Nos.

single pole 6A to 25A suitable to operate on

V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

90 Providing & erecting 240 V MCB double pole 27.00 362.59 Nos.

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B)

Amp. Cat-III

91 Providing & erecting 415 V MCB Four Pole for 30.00 811.03 Nos.

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (C.) for

Amp. Cat-III

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

92 Providing and erecting Sheet Steel powder 3.00 6497.33 Nos.

coated Vertical MCB distribution board (VTPN) -

flush / surface mounted double door (IP54) fitted

with copper insulated busbar, isolated neutral bar,

earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3, suitable for 63/100 AMP

TPN MCCB + RCCB as incomer and three phase

outgoing as per following .(The DBs should be

used of same company of MCB to be used) (B)6

way outgoing

93 Providing and erecting Sheet Steel powder 4.00 2339.16 Nos.

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar

and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B)

three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (i) 4 way

94 Providing and erecting Approved make RCCBs 6.00 2458.34 Nos.

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (iI)

Amps.DP Cat. III

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

95 Supplying & erecting earth pit of minimum bore 4.00 4591.46 Nos.

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly

stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain

moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

96 Providing , erecting , fabricating the M.S. 35.00 77.77 Kgs.

structure as per requirement on site incorporating

proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting,

welding, grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with necessary

grouting, cementing, plastering & finishing

97 Providing and erecting XLPE (IS:7098)(I)-88 ISI 660.00 140.39 Mtrs.

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (A) 4 core 4 Sq. mm

98 Making trench in soft soil of suitable width of 90 120.00 55.55 Mtrs.

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

99 Making trench in Hard Murrum / Tar Road of 30.00 74.74 Mtrs.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground.

100 Making trench in Hard Murrum / Tar Road of 15.00 357.54 Mtrs.

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

101 Providing and, fixing heavy duty flange type brass 24.00 33.33 Nos.

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (A)

2 to 4 core 2.5 / 4 Sq. mm

102 Providing and erecting Approved make Ceiling 15.00 1596.81 Nos.

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by

Engineer in charge]

103 Supplying and erecting 19 / 20 mm. nominal bore 10.00 108.07 Mtrs.

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leckage and earthing.

104 Supplying & erecting single phase approved 8.00 2054.34 Nos.

make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable for

medium duty having following dia size and

maximum speed in RPM [A] 300-305 mm dia

RPM Cat-II

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

105 Rewinding of Any fan by using supper enamelled 80.00 401.98 Nos.

copper wire and over hauling and putting in

working order with original speed with guarantee

for one year including credit of D.M. retained by

106 Supplying & erecting approved make SMC press 2.00 515.10 Nos.

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per

requirement having locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box. (b) 250mm x

200mm x 100mm [deep]

107 Supplying & erecting approved make SMC press 14.00 476.72 Nos.

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per

requirement having locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep]

108 Supplying & erecting approved make Digital time 2.00 3168.37 Nos.

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

14 memory programme, suitable to operate on

240V + 5%, 16A with, floating contacts Minimum

switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover

erected as required with necessary connection

erected as directed.

109 Supplying & erecting power contactor ,AC3 duty 2.00 2782.55 Nos.

for time switch complete erected as per direction

Cat III [D] 4 pole 440V 40 Amp.

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

110 Providing and erecting water cooler having 2.00 54515.76 Nos.

storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C

within a hour, The water cooler should be

comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats,

relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be

made from Stainless Steel. and ISI Certified.

111 Supplying & erecting 5 stage single reverse 2.00 15620.66 Nos.

osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O'

ring presediment filter GAC filter, carbon filter

suitable buster DC pump capacity 80 psi, mention

with 40 psi inline type post carbon filter auto low &

high pressure switches with following size of

storage tank & LPH capacity & erected as

directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank

112 Providing & erecting open well horizontal mono 1.00 17279.08 Nos.

block pump set with cast iron body, complete for

three phase submersible motor having [C] For

HP 3 phase open well horizontal mono block

pump set suitable for 85 LPM to 270 LPM @

mtr to 33 mtr head suitable for 50/65 mm dia

delivery pipe Cat.II

113 Supplying & erecting approved make motor 2.00 7722.46 Nos.

control cubical panel (Direct - on - line) made

from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and

locking, arrangement consisting of suitable size of

ON- OFF isolator (AC - 3/23duty) main fuses,

single phasing preventer, indicating lamps for R-

Y - B phases, overload relay, Automatic water

level controller, Ammeter, Voltmeter each with

socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle

iron frame grouted on wall as directed. The

isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only. (A) DOL up to

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

114 Providing and erecting ISI marked PVC insulated 58.00 146.45 Mtrs.

PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size. (C)

Core x 4 Sq. mm

115 Supplying Installation Testing and Commissioning of 4MP 6.00 8876.89 Nos.

IP IR Outdoor Bullet Camera having following

specifications and features etc :- 1) Signal System:

PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera

should display Camera title, Date & Time in live &

recorded video 2)Image Sensor: 1/2.8" or better

progressive Scan CMOS to get color image even at night

condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC

ON, 0 lux with IR or better) True Day & Night High

Performance Mechanical IR cut filter with auto switch,

Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with

effective distance upto 50 meter or better and 30 meter for

colour view in night, Imaging: 1/3s to 1/30000s electronic

shutter support, Auto Gain Control , White Balance- Auto,

Back Light Compensation, Multi zone Privacy Masking,

HLC, Digital Watermarking. 3) Compression (Minimum):

Video:- H.265 or better, Audio:- G.711U/A, G.711Mu,

G.726, AAC, G.723 4) Wide Dynamic Range:- WDR

(120dB or more) 5) Digital Noise Reduction:- DNR (3D)

On/Off 6) Video Streaming & Frame Rates :- Triple

streaming , configurable Main stream: 4MP

(2560×1440)25/30fps , Sub streams minimum:

720P@25/30 fps 7) Image Setting: Rotate Mode,

saturation, brightness, contrast, sharpness adjustable

through client software or web browser, Edge Analytics:

Tripwire, Intrusion, Motion Detection 8) Cyber Security:

AES 256-bit Encryption, Configuration encryption, trusted

execution, Digest, security logs, account lockout, video

encryption, IP/MAC filtering, HTTPS, trusted upgrade 9)

Onboard Storage: Camera should support built-in Micro

SD/ SDHC/ SDXC Card slot upto 512 GB. It should be

supplied with minimum 128GB memory Card. 10)

Recording Management: Format SD, overwrite, storage

management, video to NAS device, 11) Alarm Trigger :

Motion/tampering detection; network disconnection

detection; IP conflict detection; memory card state

detection; memory space detection 12)Network Protocol:

SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS,

SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP,

SMTP, RTSPS,20) IR life: 40000 hours or higher 21)

Video Bit rate: 32 KBPS - 8 MBPS or better 22)

Standards: BIS with ER, STQC Certified, CE, FCC and

RoHS unicast, 13) System Capability: ONVIF, Camera

shall support open source VMS 14) Ethernet: 1 RJ

10/100 Ethernet port 15) Audio : It should support 1 x Built-

In Mic and 1/1 Alarm In/ Out for External Mic. and

Speakers as per site requirement. 16) Power Input: The

camera should support simultaneous dual power

input—12 VDC (via power adapter) and PoE (802.3af)—to

ensure continuous operation in the event of a failure in

one power source. 17) Power Requirement: 12VDC/24

VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67

weather proof, IK10, Metallic body 19) Operating

Condition:- Ambient Temperature:- (- )05°C to 50°C,

humidity 95% (max) (non-condensing) 20) IR life:

hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or

through client software or web browser, Edge Analytics:

Tripwire, Intrusion, Motion Detection 8) Cyber Security:

AES 256-bit Encryption, Configuration encryption, trusted

execution, Digest, security logs, account lockout, video

encryption, IP/MAC Description of Item

filtering, HTTPS, trusted upgrade 9)

(with brief

Onboard specification

Storage: and reference

Camera should to book

support built-in of

Micro Quantity Rate In figures Unit Amount

SD/ SDHC/ SDXC Card slot upto

specifications) 512 GB. It should be

1 supplied with minimum 128GB

2 memory Card. 10) 3 4 5

Recording Management: Format SD, overwrite, storage

management, video to NAS device, 11) Alarm Trigger :

Motion/tampering detection; network disconnection

detection; IP conflict detection; memory card state

detection; memory space detection 12)Network Protocol:

SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS,

SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP,

SMTP, RTSPS,20) IR life: 40000 hours or higher 21)

Video Bit rate: 32 KBPS - 8 MBPS or better 22)

Standards: BIS with ER, STQC Certified, CE, FCC and

RoHS unicast, 13) System Capability: ONVIF, Camera

shall support open source VMS 14) Ethernet: 1 RJ

10/100 Ethernet port 15) Audio : It should support 1 x Built-

In Mic and 1/1 Alarm In/ Out for External Mic. and

Speakers as per site requirement. 16) Power Input: The

camera should support simultaneous dual power

input—12 VDC (via power adapter) and PoE (802.3af)—to

ensure continuous operation in the event of a failure in

one power source. 17) Power Requirement: 12VDC/24

VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67

weather proof, IK10, Metallic body 19) Operating

Condition:- Ambient Temperature:- (- )05°C to 50°C,

humidity 95% (max) (non-condensing) 20) IR life:

hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or

better22) Standards: BIS with ER, STQC Certified, CE,

FCC and RoHS (A)4MP @ 25/30fps@1440P (2560 x

1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens

(as per site requirement).

116 Supplying Installation Testing and Commissioning of 1.00 10965.57 Nos

following Channel Network Video Recorder (NVR) with

camera licenses to record for all channels having

specifications and features etc as mentioned below : 1)

Network Video Recorder Embedded/ Installed OS (Linux)

along with Camera Licenses for number of channels of

NVR to record per NVR and to provide a live view,

storage and simultaneously Multi-channel playback of all

IP, IR camera or more and must be ONVIF with minimum

support of 256Mbps incoming Bandwidth. 2) NVR should

support H.265 or better, H.264,MJPEG, MPEG4 support

3) Must support 1 channel Input, 1 channel Output, RCA

for Two-way Talk 4) Intelligent auto power on when power

resumes after power outage. 5) Storage: It should support

minimum 2 SATA Slots with 20TB capacity/ Slot. 6)

Connectivity Interface : 1 Nos. x 10/100/1000 Mbps

Ethernet Ports, 1x RS485, 1x RS232 7) Backup Interface

: Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0)

8) Video Output Ports: 1x HDMI and 1 VGA 9) Alarm

Ports: It should have 4/1 Ch In/ Out ports to connect

various type of external sensors and output devices like

hooter/ Siren etc. 10) Email & SMS Altert options: Option

for SMS/ Email Alerts to minimum 5 designated mobile

number for power failure, HDD failure, vandalism,

tempring, network disconnection and panic 11) Web &

Mobile Application: Web, Mobile app ( For iPhone, iPad,

Android Phone) for alerts and viewing. 12) Protocols:

HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS,

SMTP, UPnP, DDNS, Alarm Server, IP Search, Multicast,

Auto Registration, ONVIF (Profile T, Profile S, Profile G),

CGI, SDK and OEM Cloud for remote monitoring without

any public IP need. 13) Standards: CE, FCC, RoHS and

BIS Certified 14) Power Supply : Should support 12VDC,

4Amp or AC100-240V, 50/60Hz Power supply. 15)

tempring, network disconnection and panic 11) Web &

Mobile Application: Web, Mobile app ( For iPhone, iPad,

Android Phone) for alerts and viewing. 12) Protocols:

HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS,

SMTP, UPnP, DDNS, Description of Item

Alarm Server, IP Search, Multicast,

(withRegistration,

Auto brief specification and reference

ONVIF (Profile T, Profile S,toProfile

of Quantity Rate In figures Unit Amount

CGI, SDK and OEMspecifications)

Cloud for remote monitoring without

1 any public IP need. 13) Standards:

2 CE, FCC, RoHS and 3 4 5

BIS Certified 14) Power Supply : Should support 12VDC,

4Amp or AC100-240V, 50/60Hz Power supply. 15)

Operating Condition : Ambient Temperature (-5°C to

50°C), humidity 90% (max) (non-condensing) 16) The

VMS, NVR application shall support all the features &

functionalities of the offered cameras. 17) VMS should

consist of Base license and Channel Licenses. VMS

should be provided with camera Licenses , with no

dependency of VMS licenses by binding with the MAC

address of the cameras to achieve the functionality. 18)

The NVR OEM shall be responsible for providing a mobile

application compatible with both Android and iOS devices,

enabling remote monitoring and playback of

cameras/NVR footage. 19) The OEM must provide its own

DDNS server hosted in India, eliminating the need for a

public IP address for remote monitoring over the Internet.

20) Must support Resolution: 7680x4320 (8K),

21) Must support recording resolution upto 32MP 22)

Must support Continuous, Alarm, Motion, Instant, Panic

Recording Mode 23) When alarm recording is enabled

and an event occurs, you can click the alarm icon on

monitoring page to view the alert details. The snapshot

function is supported on monitoring and playback page

24) The Network Video Recorder (NVR) shall be

configured to send email whenever a system message is

created or an alarm event occurs. The email server shall

be a valid SMTP server. Each recipient email address

shall be configured to receive any combination of critical,

warning, or informational messages or alarm notifications.

When an alarm occurs, the email message includes the

NVR name, time of alarm and a list of camera that is

configured to record upon alarm 25) It should support

Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS,

DDNS, FTP, NTP, UPnP, Multi IP Setting. Convert

multiple recording files to one avi/MP4 file. 26) General AI

Based Search: Search Pictures by channel, time, event

type, target classification (Fall Detection, People

Approach Detection, People No. Exception Detection,

People Staying Detection, Violence Detection. 27) Alarm

Notifications based on: Motion detection, video tampering,

video loss, scene changing, PIR alarm, Camera external

alarm, Face detection, face recognition, perimeter

protection (intrusion and tripwire), ANPR, people counting,

stereo analysis, crowd distribution, heat map, Disk Full,

Storage Error, IP Conflict and abnormal behavior of fan

28) Alarm Notification should be linked with Recording,

snapshots, Camera external alarm output, buzzer, logs,

presets and email. 29) Built-In Artificial Intelligence: NVR

should have built-in AI :- - 2 Channel face detection and

recognition, - Minimum 4 Channel perimeter protection, -

Minimum 8 Channel Smart Motion Detection 30) Face

Recognition Database Capacity: It should support total

Blacklist and Whitelist capacity of Minimum 20,000 Faces

or more with Face Detection speed of 12 face

images/sec. 31) Face & Human Attributes Search:

Search Pictures/ Video by Gender, age group, glasses,

expressions, face mask, beard, Top color, top type, hat,

bag, age, gender and umbrella. 32) ANPR Capability: It

should support ANPR Camera with License plate, plate

color, vehicle body, vehicle model, vehicle logo, calling,

seatbelt, vehicle registration location etc vehicle

attributes. 33) Alarm Notifications based on: Motion

Blacklist and Whitelist capacity of Minimum 20,000 Faces

or more with Face Detection speed of 12 face

images/sec. 31) Face & Human Attributes Search:

Search Pictures/ Video by Gender, age group, glasses,

Description of Item

Item expressions, face mask, beard, Top color, top type, hat,

bag, brief specification

gender and 32)

and umbrella. reference to book ofIt

ANPR Capability: Quantity Rate In figures Unit Amount

should support ANPR Camera with

specifications) License plate, plate

1 color, vehicle body, vehicle 2model, vehicle logo, calling, 3 4 5

seatbelt, vehicle registration location etc vehicle

attributes. 33) Alarm Notifications based on: Motion

detection, video tampering, video loss, scene changing,

PIR alarm, Camera external alarm, Face detection, face

recognition, perimeter protection (intrusion and tripwire),

ANPR, people counting, stereo analysis, crowd

distribution, heat map, Disk Full, Storage Error, IP Conflict

and abnormal behavior of fan, cybersecurity exception 34)

Alarm Notification should be linked with Recording,

snapshots, Camera external alarm output, buzzer, logs,

presets and email. 35) General AI Based Search: Search

Pictures by channel, time, event type, target classification

(Fall Detection, People Approach Detection, People No.

Exception Detection, People Staying Detection, Violence

Detection. 36) Smart playback function: Should support

playback to improve the playback efficiency 37) VCA

(Video Content Analytic): Should support multiple video

contented analytics based on camera analytics

16 Channel Network Video Recorder (NVR) having

display split :- Main screen: 1/4/8/9/16, 2nd screen:

117 Supplying, Installation, Testing and 1.00 14020.82 Nos

Commissioning following capacity Serveillance

grade Hard Disk with upto 256MB/s Transfer

Rate, 256 MB Cache, 7200 RPM Disk Speed,

inch form factor, SATA Interface, BSMI, ICES-

003/NNB-003, CE, FCC, KC, Maghreb, RCM,

UKCA, VCCI, CB-Scheme, TUV, UL

Certifications.(A) 6TB (Terabytes)

118 SITC of 24 x 10/100/1000BASE-T PoE ports, 2 x 1.00 46195.38 Nos

Gigabit SFP ports, Advanced L2 switching and

security features, L2+ Static Routing, Optional

“standard mode” or “surveillance mode”

management user interface, Remote and Cloud

management, 190W PoE budget Including 3 Year

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

119 Supply, Installation, testing and commissioning of 1.00 15065.16 Nos

24 port Cat 6 19" Fully loaded Modular Toolless

Patch Panel enables all possible combinations of

the various types of cable (UTP, FTP, SFTP)

mounted on the same panel by using various

toolless connector blocks/modules. Have a metal

structure enabling them to be durably fixed to the

uprights of the 19” chassis and assuring

automatic grounding between toolless RJ-45

connectors, the panel, and the 19” uprights of the

enclosure. Include rear cable support with plastic

cable guides to hold cable without need for cable

ties. Include quick mounting system to mount the

panel into the 19” rails without use of cage-nuts.

These may be used to secure the connections of

wifi access points, IP cameras, servers, or other

critical devices. Front Removal IO's option for

maintenance and trouble shooting with 6 Different

Colours Labels for Labelling & Identification of

Individual Ports. Tested and guaranteed under

dual circuit IEEE PoE++ more than 90W for up to

2500 on-load connections / disconnections.

120 Supplying and fixing of following size Wall Mount 1.00 5943.85 Nos

Rack having Fixed Structure with 0.8mm CRCA

Sheet, completely knocked-down condition (CKD)

Shape, Vertical Mounting Rail 1.6 mm with

'U'Marking, Minimum 2 cable entry/exit provision

at Top and bottom with rubber protection, Front

5mm Toughened Glass with lock, wall mounting

kit, Powder coated Color- RAL- 7035, complied

with UL & RoHS, 2 x 6 sockets 16A power

distribution units, 3 numbers closed cable

organizer, Hardware mounting screws packet of

20 x 1 number, etc. complete as required. (A) 6U

121 Supply, Installation, Testing & Commissioning of 4.00 877.69 Nos

back box with blank plat for camera

Description of Item

(with brief specification and reference to book of Quantity Rate In figures Unit Amount

specifications)

122 Supply, Installation, Testing and commissioning 1.00 52328.10 Nos.

of 42/43" UHD Signage/Professional Display|500

Nits Brightness |50000:1 Contrast Ratio |

Operation: 24x7|1xVGA; 2xUSB 2.0 , 4x HDMI

2.0 In, Secure USB 2.0 (Internal), RJ45, RJ12,

RS232, Optical SPDIF|1xHDMI 2.0 out, Supports

Daisy Chain |Speaker 2x10 W|30-degrees Tilting

Installation | Open Content Management Support,

Scheduler, USB-Autoplay, AutoLaunch, HDMI-

CEC, HDMI-Wakeup, Auto-switch on Failover,

Panel Lock, OSD Rotation, NoSignalPowerOff,

Screen Saver, Pixel shift,Scheduler, Videowall

support, Remote control via LAN, Realtime Clock,

Joystick, Rocker Switch| Optional : SDM or OPS

compatibility, Embedded IR, IR extender option |

Optional: Overlay Touch Kit

Compatibility|Certifications: Safety, EMC, CE

[Sony, Samsung, LG, Panasonic]

Total Rs.

Rupees FourtyThree Lakh Fifty Thousand Five Hundred FourtyNine and Paisa Thirty Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my / our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. 10500.00 must be recovered from Contractor's

respective R.A. Bill.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Himatnagar Himatnagar