05 /EE/PMD/PHED OF 2024-2025/Sl15

Amount

Vertical electrical sounding using resistivity meter to get parameter in terms of depth and discharge including cost of transportation of machine and tools, plants, to site including the shifting the machine and plants in different points in following sites and submission of 03 copies of date collected from each site for analysis and interpretation of VES data including analysis of data and interpretation of layer parameter and report preparation on ground water availability a) short sounding for less than a depth of 200 mtr from G.L. For 01 no Pin Point Site -03 nos Test, For 01 nos Pin Point Site -1x3 NOS Test

Mobilisation and transportation of the Rig machine and its accessories and other matrials etc to the site.

Drilling a bore hole in DTH process through any kind of soils and rocks in overburden suitable for lowering and fitting fixing of 200 mm internal dia casing pipe(casing pipe may be supplied departmentally) up to an average depth of 25±5 mtrs. and subsequently 165 mm diameter boring through any kind of rocky formation upto a total depth of 170 mtrs (for dry drilling or sufficient water not achieved drilling may be continued up to 200 Mtr) including all other works necessry for boring and lowering fitting fixing of MSERW /UPVC casing pipes suitable for 165mm dia drilling in rock bed and grouting the same as per direction of E.I.C .including (in case of MSERW casing pipes) the cost of welding of MSERW casing pipes and welding the top of the casing pipe with one 8mm thick MS cover plate(with supply and delivery of that plate) Necessary arrangement to be made for proper security of bore hole. Note:- a) MSERW/UPVC casing pipes should be properly inserted or lowered in overburden zone for proper RBTW formation. b)In case of collapse borehole payment will be done for clear measurable depth only. a) 0 to 23 mtrs

b) 25 to 177 Mtrs or above

Supply and delivery at site of upvc pipe (CM) of 200 mm dia conforming to IS 12818:2010 a) 200mm dia Make-Utkarsh/Supreme/PHE approved make. NB-Material to be supplied as per requirement of Site.

Washing and devoloping tube well with air compresssor pump and engine for 8 (eight) hours contineous pumping per day with necessary 5 arrangements for testing the yield in gallon per hour with V notch including hire and labour charges for all tools and plants scaffolding as required.

Making suitable size tubewell foundation guard 1m x 1 m as required dimension with supplying of necessary cement brick, sand and stone chips including plastering and neat cement finish complete masonary works and hinge MS fabricated top gate with locking arrangement as per direction of EIC.

Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS: 8034 (and as amended thereafter) with standard MOC for potable clear col water and BEE 3 Star or above rated. The pump shall be directly coupled with a continuous rated 2-pole suitable wet type vertical squirel cage induction motor conforming to IS: 9283 (and as amended thereafter), suitable for operation in AC Three phases 415 V, 50HZ, suitable for DOL starter (category B motor) (Make: Approved Vendor list of PHED) Discharge: 3.0 m3/hr. Head: 139 Mtr.

Supply and delivery of 1.1KV grade 2.5 sq.mm x 3 core water proof flat submersible cable IS 694:2010 for above submersible pump. (Make: Approved Vendor list of PHED)

Supply and delivery of the following pipes, valves and gauges etc at site:- 3 mtr long 40 mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

40 mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

40 mm dia. GM Globe valve ISI Screwed End

40 mm dia. GM Check non return valve ISI Screwed End

40 mm dia. GI Elbo

40 mm dia. GI Tee

40 mm GI Nipple

40 mm x 32 mm GI reducer

Supply and delivery of 1.1KV grade 4 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part 1) 2011 with Up To Date Amendments. (Make: Approved Vendor list of PHED)

Supply, fitting fixing of at site fabricated top cover suitable for tube well made of 10 mm thick MS plate with suitable hole for entry of 40 mm dia column pipe and 32 mm GI pipe for cable protection including supply of all 40 mm dia short pieces, MS flange, Socket, Enlargers and 32 mm dia all fittings short pices GI pipe with tube well as per required to complete the job.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Making suitable size Tubewell with valve cover foundation guard 1000 mm x 1000 mm as required dimension with supplying of necessary cement, brick sand and stone chips including plastering and net cement finish complete masonery work and hinge MS fabricated top gate with locking arrangement as per direction of EIC.

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Supply & Making necessary pvc Schedule 80 pipe (dia of pipe not less than 32mm) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job.

Supply & delivery of DOL starter for 3 HP Submersible pump motor with volt meter, Amp meter,ASS,VSS,Push button switch,trip indicater lamp complete,suitable for three phase 415 V supply, with IP54 protection (3.8 - 6 Amp) Make:- BCH/ABB/KSB/Havells

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work 32 mm PVC Pipes

40 mm PVC Pipes

Laying of cable upto 3/4 core 4 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of power cable from starter & cable protection pipe as required and all to complete the job including all connection with MCC panel & testing commissioning as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED (BID ID -5525358)

TAPAN KUMAR DEY (BID ID -5529559)