SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION UPGRADATION / MODIFICATION WORK AT SONARI SEWAGE PUMPING STATION ALONG WITH 05 (FIVE) YEARS OF O&M WORK OF SOUTH (KANAKPUR) ZONE-B OF DRAINAGE DEPARTMENT OF SURAT MUNICIPAL CORPORATION.

Name of Work:- SETC OF ELECTRICAL, MECHANICAL AND

INSTRUMENTATION UPGRADATION / MODIFICATION

WORK AT SONARI SEWAGE PUMPING STATION ALONG

WITH 05 (FIVE) YEARS OF O&M WORK OF SOUTH

(KANAKPUR) ZONE-B OF DRAINAGE DEPARTMENT OF

SURAT MUNICIPAL CORPORATION.

LAST DATE OF SUBMISSION OF TENDER FEE & : From Dt. 20-04-2026 to

E.M.D IN HARD COPY 30-04-2026 up to

(BY SPEED POST / RPAD THROUGH POSTAL AUTHORITY ONLY)

LAST DATE OF ONLINE SUBMISSION OF : Up to Dt. 20-04-2026 up

TENDER (ALONG WITH NECESSARY to 18.00 Hrs.

DOCUMENTS, CERTIFICATES ETC.)

SCHEDULE-B2 OPERATION & MAINTENANCE AUGMANTATION WORK ...............................

SCHEDULE-B3 OPERATION & MAINTENANCE WORK ..............................................................

1 The Schedule of quantities and Rates are to be read for the purpose of

pricing in conjunction with instructions to tenderers, technical

specifications, drawings and conditions for contract.

2 The price quoted in the summary of costs, sheets of schedule of quantities

and rates shall be of all-inclusive value for the work described including

all cost and expenses which may be required for the execution of the work

described together with all general risks, liabilities and obligations set

further or implied in the documents on which the tender is based.

3 The quantities furnished are approximate. In the event of actual quantities

varying from those furnished herein or items deleted or added the

percentage (Plus / Equal/ minus) quoted for the entire work shall remain

firm and no extra claims in this respect will be entertained. The payment

shall be made based on the actual quantities in the complete work.

4 Percentage (Plus/Equal/ Minus) quoted by tenderer shall be firm even if

the scope in the contract reduced/increased.

5 Percentage (Plus/ Equal/Minus) and the total amount entertained in the

5 Percentage (Plus/ Equal/Minus) and the total amount entertained in the

summary of cost, sheet of schedule quantities and rates shall be given on-

6 Detailed specifications of items of work are described in the Technical

Specifications. It gives guidelines to the reference of relevant clauses of

specification and mode of measurement. Tenderer shall read this in

conjunction with other technical specifications and quote rates

7 The Quality Assurance Plan provided shall be strictly followed.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION UPGRADATION /

MODIFICATION WORK AT SONARI SEWAGE PUMPING STATION ALONG WITH 05 (FIVE)

YEARS OF O&M WORK OF SOUTH (KANAKPUR) ZONE-B OF DRAINAGE DEPARTMENT

OF SURAT MUNICIPAL CORPORATION.

I/We, the undersigned, hereby tender for carrying out the work described in the schedule

subjected to the conditions mentioned in various sections and subsections of this tender

Should this tender be accepted, I/We hereby agree to abide by and to fulfill all the terms and

provisions of specifications and conditions of contract and default thereof of forfeit and pay

to Municipal Corporation the sum of money mentioned in the said condition.

The Earnest Money Deposited by me / us with tender may be forfeited to The SURAT

MUNICIPAL CORPORATION, if I /We do not deposit security deposit in accordance with

the relevant clause of the conditions of contract, otherwise the said sum of

4,44,200.00/- shall be retained by the Municipal Corporation as any account of such

security as, aforesaid.

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

3 . NAME OF WORK: -

SETC OF ELECTRICAL, MECHANICAL AND INSTRUMENTATION UPGRADATION /

MODIFICATION WORK AT SONARI SEWAGE PUMPING STATION ALONG WITH

05 (FIVE) YEARS OF O&M WORK OF SOUTH (KANAKPUR) ZONE-B OF DRAINAGE

DEPARTMENT OF SURAT MUNICIPAL CORPORATION.

ESTIMATED COST: 4,44,13,100.00 /-

TENDERER’S BID FOR CAPITAL WORK:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs. 3,40,57,100.00/-

TENDER AMOUNT (IN FIGURES): Rs. (STRICTLY ONLINE)

TENDER AMOUNT (in WORDS): Rs. (STRICTLY ONLINE)

TENDERER’S BID FOR O&M WORK DURING AUGMENTATION PERIOD

(1 month Rate):

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs. 1,47,334.00/-

TENDER AMOUNT (IN FIGURES): Rs. (STRICTLY ONLINE)

TENDER AMOUNT (in WORDS): Rs. (STRICTLY ONLINE)

TENDERER’S BID FOR O&M WORK for 5 Years:

PERCENTAGE EQUAL/ ABOVE/BELOW OF Rs. 85,88,000.00/-

TENDER AMOUNT (IN FIGURES): Rs. (STRICTLY ONLINE)

TENDER AMOUNT (in WORDS): Rs. (STRICTLY ONLINE)

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation

4. SCHEDULE- B ABSTRACT

Sr. No. Description Total Amount

Sr. No. Description Total Amount

A Electro-Mechanical (Capital) Work for SPS

O&M Work for SONARI SPS AUGMENTATION PERIOD

(The cost towards augmentation work shall be sanctioned on a

monthly basis and shall be payable based on the actual cost

incurred during the execution of augmentation work)

C O&M Work for SPS

Total Amount of Schedule B

Total Amount of Schedule B

(Excluding GST)

SCHEDULE-B1 ELECTRO-MECHANICAL WORK

MECHANICAL ESTIMATE

SR. DESCRIPTION QTY. UNIT UNIT TOTAL

1 NON CLOG SEWAGE 4 Set 13,62,234.67

SUBMERSIBLE PUMP SETS

Supply, installation ,testing and

commissioning of Non Clog sewage

Submersible Pump Sets having with

motor as per specification.

Capacity : 515 LPS , Head : 25 MT.

(Approx. 200 KW, 270 HP)

2 KNIFE GATE VALVE 4 Set 1,52,783.90

Supply, Installation, Testing and

Commissioning of Manually operated

Knife gate valves for the discharge line

of Pump Sets as per Detailed Tender

Size : 500 mm Día

Location : Delivery of Pump sets

Mode of Operating : Manual

3 NON RETURN VALVE 4 Set 1,39,392.12

Supply, Installation, Testing and

Commissioning of Non Return Valve

as per detailed tender specification.

Size 500 mm Día

Location : Delivery of Pump sets

4 C.I. DISMANTLING JOINT 4 Nos. 38,474.78

Supply, installation, testing and

commissioning of C.I. Dismantling

Joint as per IS 1538, Design

Temperature :50 C.

Size : 500 mm Dia

5 LIFTING ARRANGEMENT 3000 Kgs. 243.16

Supply, Installation, Testing and

Commissioning of Lifting

Arrangement screen S.S material for

SPS as per Detailed Tender

6 C.I. FITTINGS & SPECIALS 5000 Kgs. 58.58

Supply, Installation, Testing and

Commissioning of C.I. as per detailed

Tender Specification.

7 KNIFE GATE VALVE 1 Nos. 10,01,271.19

Supply, Installation, Testing and

Commissioning of Knife Gate valve

for Common Header Line as per

Detailed Tender Specification

Size : 1100 mm Día

Location : Common Header

Mode of Operation : Electrically

8 NON RETURN VALVE 1 Nos. 5,93,009.95

Supply, Installation, Testing and

Commissioning of Non Return Valve

as per Detailed Tender Specification

Size : 1100 mm Día

Location : Common Header

9 C.I. DISMANTLING JOINT : 1100 1 Nos. 2,06,355.93

mm for Common Header

Supply, testing & commissioning of

flange ends C.I Dismantling as per

detailed Tender Specification.

10 AIR VALVESupply, Installation, 1 Nos. 41,866.52

Testing and Commissioning of Air

valve for Common header line as per

Detailed Tender SpecificationSize :

11 5 TON EOT 1 Set 5,59,792.50

Providing & erecting Single girder type

three way direction fully electrically

operated E.O.T. crane with electrically

operated hoist, class II duty, geared

travelling trolley as per tender

Specifications.

Capacity : 5 Ton, Span : As per site

12 M.S. FABRICATION WORK 10000 Kgs. 98.98

For Grills, Jalisa , I Beams, Grating at

Various Opening, ISMB / Girder

Channels for EOT Crain etc.

13 S.S. FABRICATION WORK 20000 Kgs. 243.16

Various S.S Fabrication Work at

Pumping Station for Manual Screen

and Ladder, Nut and bolt for C.I.

14 S.S. PIPES & SPECIALS 15000 Kgs. 243.16

Supply, installation, testing and

commissioning of S.S. Pipes &

Specials with necessary supports &

15 C.I. WALL THIMBLE MOUNTED 4 Nos. 6,65,633.05

Supply, Installation, Testing and

Commissioning of Wall Thimble

mounted sluice gate as per Detailed

Tender Specification

Size : 1200 mm (w) x 1200 (h) mm

Mode of Operation : Electrically

16 SITC of Actuator on existing sluice 4 Nos. 97,754.24

gate including 50 mm dia approximate

5 mtr. Length shaft & Servicing &

Overhauling of Existing Sluice Gate as

per tender specification.

Size of Gate : 1200 mm (w) x

17 Supply, Installation, Testing and 1 Nos. 17,895.18

Commissioning of Float and board

type level Indicator with all accessories

as per Detailed Tender Specification

Range : 0-15 Mtr.

18 Supplying & Fixing SMC Chequered 20 Sq. 5,897.37

plate having 12 mm thickness, made Mt.

out of SMC Confirming to IS 13410 &

by Hot press Compression Moulding

technique Suitable cut & fixed with

MS Angle Frame to Fit Trench Widths

as per site requirement approved. by

engineer in charge.

19 Supply, Installation, Testing and 40 Sq. 580.28

Commissioning of FRP Chequered Mt.

Plate as per Detailed Tender

20 Supply, Installation, Testing and 250 Rmt. 1,785.09

Commissioning of Railing as per

Detailed Tender Specification

21 DEWATERING PUMPSupply, 1 Nos. 1,64,952.19

testing & commissioning of

Dewatering Pump.Capacity : 10 LPS,

18 Mtr Head, 5 HP

22 Supplying & erecting approved make 1 Nos. 15,133.17

self-priming domestic monoblock

water pump with 1 H.P motor, suitable

for operation on 230 volts, 50c/s. AC

supply with metallic flange, and M.S.

impeller delivery for lifting line water

to over head tank

23 CHAIN PULLEY BLOCK 1 Nos. 18,422.40

Supply, Installation, Testing and

Commissioning of 2.0 Ton Chain

Pulley Block with Triple gear

arrangement, lifting hook, load chain &

locking device for Lifting of Manually

Operated Screen and Dewatering

Lift (6m + 1m), Capacity : 2 Ton

24 Supply, Installation, Testing and 1 Nos. 12,711.86

Commissioning of Grass Cutter with

30 meter cable for SPS

25 Supply of Aluminium Self Supported 1 Nos. 4,661.02

"A" Type ladder (8 Feet)

26 Flexible Garden Pipe 100 Feet 29.66

27 PRESSURE GAUGE 4 Nos. 3,042.12

Design, Supply, Installation, Testing

and Commissioning of Diaphragm

sealed Pressure Gauge. (Each Pump

Range : 150 mm Dial- 0 to 4 Kg/cm2

28 TOOLS & TACKELS 0 Lot 53,155.32 -

Supply of various tools and tackles as

described in Technical Bid.

29 Construction of Necessary size M 20 2 Lot 73,343.28

Grade RCC Chamber with all requires

materials for Installation of Common

Header Valves. (3x3) and Flow Meter.

30 Dismantling, Loading, Transportation 1 Job. 42,372.88

and Unloading of all existing pumping

station's accessories such as pump set,

screen, panel, cable, valves, gates etc.

at SONARI SPS to SMC warehouse

or with in Surat limit.

31 Charges for By Pass arrangement to 1 Job 1,27,118.64

provide, operate & maintain the

pumping machineries with all required

manpower, electrical and mechanical

equipment with (DG set in Case of

power failure) Till satisfactory

commissioning of new installation &

As per detailed scope of work.

32 Desilting Work for Wet Well and SPS 1 Job 84,745.76

with requires safety measures and

detail scope of work

33 Erection Work of Plugging for New 1 Job. 22,500.00

34 Erection Work of Plugging for New 1 Job. 23,500.00

35 Erection Work of Plugging for New 1 Job. 26,500.00

ELECTRICAL ESTIMATE

1 11 KV TWO POLE STRUCTURE. 1 Lot 1,21,869.63

'Supply Installation Testing

Commissioning of 11 KV Two Pole

2 HTMC PANEL 0 Lot 5,80,136.00 -

Supply Installation Testing

Commissioning of HTMC Panel.

3 DISTRIBUTION TRANSFORMER 2 Nos 10,54,858.14

11 /0.433 KV, 630 KVA ONAN,

Energy Efficiency Level 2 outdoor

type step-down transformer as per

tender Specifications, Data sheet, IS

1180 and relevant and as per given

description etc.

4 60 KVAR Fixed Capacitor For 120 kVAR 287.85

Distribution Transformer- 2 Nos

5 Foundation for Transformer 2 Set 69,361.91

6 Fire Protection Wall for Transformer 1 Set 68,486.90

7 HT PANEL 1 Nos. 10,00,710.02

SITC of Indoor type HT panel as per

tender Specifications, Data sheet, IS

and as per given description etc.

Comprasing of Vacuum circuit breaker

for 1 No. incomer, 2 Nos. O/G feeeders

for Required KVA 11/0.433 kv

distribution transformers.

8 H.T. CABLE : 11 KV, 3c x 120 80 Mtr. 690.84

sq.mm XLPE (E) armoured cable

9 H.T. CABLE TERMINATION : 6 Nos. 8,880.93

Heat shrinkable type outdoor H.T.

cable end terminations suitable for

KV, 3c x 120 sq.mm. XLPE (E)

armoured cable.

10 H.T. CABLE TERMINATION : 4 Nos. 6,306.44

Heat shrinkable type Indoor H.T. cable

end terminations suitable for 11 KV, 3c

x 120 sq.mm. XLPE (E) armoured

11 POWER MOTOR CONTROL 1 No. 34,50,160.00

SITC of LT panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

12 JUNCTION BOX 4 No. 23,028.00

Supply, erection, testing &

commissioning of Junction Box for

Pumpset as per tender Specifications,

Data sheet, IS and as per given

description etc.

13 APFC PANEL 1 No. 2,56,493.54

160 KVAR Automatic Power Factor

Correction panel as per tender

Specifications, Data sheet, IS and as

per given description etc.

14 Supply, laying, connection, testing and 320 Mtr 1,223.11

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered -

Transformer to SPS PMCC Panel (4

Run For Each X'Mer) as per

Specification and IS 7098 Part ISize :

15 Supply, laying, connection, testing and 280 Mtr 684.78

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered-

PMCC Panel To JB To Pump sets-1 (2

Run) as per Specification and IS

Size : 3 c x 240 sq.mm

16 Supply, laying, connection, testing and 70 Mtr 346.43

commissioning of heavy duty, 1.1 KV

XLPE AL conductor armordered-

PMCC Panel To APFC Panel (2 Run)

as per Specification and IS 7098 Part I

Size : 3½ c x 95 sq.mm

17 Supply, laying, connection, testing and 100 Mtr 297.95

commissioning of XLPE Copper

conductor armoured-for industrial

socket, External LDB, Instrument

Size : 4 c x 10 sq.mm.

18 Supply, laying, connection, testing and 100 Mtr 86.86

commissioning of XLPE Copper

conductor YWY- other work

Size : 3 c x 2.5 sq.mm.

19 Supply, laying, connection, testing and 100 Mtr 142.41

commissioning of XLPE Copper

conductor YWY- Industrial points

Size : 4 c x 4 sq.mm.

20 Supply, laying, connection, testing and 300 Mtr 97.97

commissioning of XLPE AL conductor

armoured-for Street Ligth in SPS

Size : 4 c x 10 sq.mm.

21 Supply, laying, connection, testing and 300 Mtr 81.81

commissioning of PVC CU conductor

Unarmoured-for Street Light in SPS

Size : 4 c x 2.5 sq.mm.

22 Supply, laying, connection, testing and 250 Mtr 347.46

commissioning of XLPE Copper

conductor YWY- Actuator panel and

other panel/work as per IS

Size : 16 c x 1.5 sq.mm.

23 Supply of FRLS PVC Insulated ISI 500 Mtr 43.65

Mark Cu Conductor Two Wire 1.5 Sq.

mm. for Electrification work of

Pumping Station.

24 CABLE TERMINATION'Supply of 20 Nos. 1,532.17

connection, testing and commissioning

of Double compression brass/steel

cable glands and crimping type

bimetallic lugs / sockets with necessary

tools and equipments as specified in

specifications and IS.Termination

Using Double compression brass/steel

cable glands and crimping type

bimetallic lugs / sockets of heavy duty,

1.1 KV XLPE AL conductor

armordered - Transformer to SPS

PMCC Panel (4 Run For Each X'Mer)

as per Specification and IS 7098 Part

ISize : 3½ c x 400 sq.mm

25 Termination Using Double 12 Nos. 904.96

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To JB To Pump (2 Run) as per

Specification and IS 7098 Part I

Size : 3 c x 240 sq.mm

26 Termination Using Double 4 Nos. 440.36

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of heavy duty, 1.1 KV XLPE

AL conductor armordered-PMCC

Panel To APFC Panel (2 Run) as per

Specification and IS 7098 Part I

Size : 3½ c x 95 sq.mm

27 Termination Using Double 20 Nos. 153.52

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE Copper conductor

armoured-for industrial socket,

External LDB, Instrument panel

Size : 4 c x 10 sq.mm.

28 Termination Using Double 20 Nos. 89.89

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE/PVC Copper

conductor YWY- other work

Size : 4 c x 2.5 sq.mm.

29 Termination Using Double 20 Nos. 85.85

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE/PVC Copper

conductor YWY- other work

Size : 3 c x 2.5 sq.mm.

30 Termination Using Double 20 Nos. 132.31

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE Copper conductor

YWY- Industrial points

Size : 4 c x 4 sq.mm.

31 Termination Using Double 20 Nos. 129.28

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE AL conductor

armoured-for Street Light in SPS

Size : 4 c x 10 sq.mm.

32 Termination Using Double 18 Nos. 415.25

compression brass/steel cable glands

and crimping type bimetallic lugs /

sockets of XLPE Copper conductor

YWY- Actuator panel and other

panel/work as per IS 7098Size : 16 c x

33 Providing & laying. R.C.C. Hume pipe 10 Mtr. 342.37

for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (A) 300 mm dia

34 Providing & laying. R.C.C. Hume pipe 10 Mtr. 262.77

for cable to be laid 90 cms. below

ground across the road crossing or on

floor with necessary material in an

approved manner and making the

ground as per original. (B)150 mm Dia

35 Making trench in soft soil of suitable 50 Rmt. 46.22

width of 90 cms deep for laying cable

or locating the fault all over the run

and backfilling the same and making

the surface as normal ground.

36 MAINS WIRING: 300 Rmt. 58.20

Mains with 1.1kV grade FRLS PVC

insulated ISI marked stranded copper

conductor wire in following type of

pipe to be erected concealed in /flushed

on wall/ ceiling with 1.5 sq. mm copper

conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size.

(A) with medium class Rigid PVC

pipe and accessories

(a) 2 wire 1.5 sq. mm

37 (b) 2 wire 2.5 sq. mm 100 Rmt. 77.03

38 (f) 4 wire 2.5 sq. mm 70 Rmt. 119.83

39 Point wiring for Light/ Bell with 2-1.5 25 Nos. 418.55

sq. mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1kV

grade FRLS PVC insulated multistrand

copper wires, in following type of pipe

to be erected concealed in/ on surface

on wall/ ceiling complete with 6A

Modular type switch/ bell push &

accessories and earth continuity of

following type, erected on PVC/

Metallic box, single mounting base

frame covered with textured/ metallic

front plate modules erected on/ in wall/

ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/

H.D. Connector as directed.

(a) with medium class Rigid PVC

pipe and accessories, Cat. III

40 Point wiring for FAN with 2-1.5 5 Nos. 598.30

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated

multistrand copper wires, in below

type of pipe erected with 6A Modular

type switch and hum free EME four or

more step type electronic fan regulator

with separately mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D. Connector as directed.(a) with

medium class Rigid PVC pipe and

accessories, Cat. III

41 Point wiring for Individual Plug with 10 Nos. 444.23

earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1kV grade FRLS

PVC insulated multistrand copper

wires, in following type of to be erected

concealed in/ on surface of wall/

ceiling complete with Modular type

switch & 5 pin Plug erected on PVC/

Metallic box covered with appropriate

front plate modules erected on/ in wall/

ceiling as per pipe erected with

following type of accessories.

For 6A Plug with 2-1.5 sq.mm Cu.

Wire with medium class Rigid PVC

pipe and accessories, Cat. III

42 For 16 A Plug with 2-2.5 sq.mm Cu. 5 Nos. 668.48

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

43 For 16 A Plug with 2-4 sq.mm Cu. 5 Nos. 788.31

Wire with medium class Rigid PVC

pipe and accessories, , Cat. III

44 Point wiring for looped plug with 6A 5 Nos. 240.52

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

45 Point wiring for looped plug with 16A 5 Nos. 466.10

Modular type switch & 5 pin socket

erected on PVC/ Metallic box, single

mounting base frame covered with

textured/ metallic front plate modules

erected on/ in wall/ ceiling with

following type accessories.

46 Point wiring for secondary light point 4 Nos. 120.69

with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked

1.1kV grade FRLS PVC insulated

multistrand copper wires, in following

type of pipe to be erected concealed in/

flushed on wall/ ceiling, complete with

earth continuity and necessary

connection with primary light with

accessories erected on Metal/ PVC box

covered with 3 mm thick PC

(Polycarbonate)/ Acrylic sheet for

open/ concealed wiring with necessary

Lamp holder/ ceiling rose/ H.D.

Connector as directed. Note :-

Maximum up to 6 mtrs length, excess

will be considered asMains for

Secondary Point.(A) with medium

class Rigid PVC pipe and accessories

47 Point wiring for Two way controlled 2 Nos. 528.97

Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq. mm (green) both are of

ISI marked 1.1kV grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in/ flushed on wall/ ceiling

complete with 6A Modular type switch

sand following type of accessories

erected on PVC/ Metallic/ Wooden

box, single mounting base frame

covered with textured/ metallic/ white

front plate module secreted on/ inwall/

ceiling as per pipe erected. with

necessary batten/ angle holder or

ceiling rose or H.D. Connector as

(A) with medium class Rigid PVC

pipe and accessories

48 One industrial metal clad switched 2 Nos. 593.22

socket outlet point controlled with

MCB with powder coated enclosure &

related accessories to complete the

(63 A x 3 pin 250 volt)

49 UPVC or better material made switch 2 Nos. 340.76

boards with required switches

Surface Mounted 12 Module Switch

50 UPVC or better material made switch 4 Nos. 330.51

boards with required switches

Surface Mounted 8 Module Switch

51 UPVC or better material made switch 8 Nos. 266.13

boards with required switches

Surface Mounted 4 Module Switch

52 UPVC or better material made switch 10 Nos. 156.78

boards with required switches

Surface Mounted 2 Module Switch

53 Supplying and erecting Approved 15 Nos. 588.88

make of LED Surface mounted

luminaire with rear reflector suitable

for office and laboratory applications.

(a) With 20 watt LED lamp

54 Supplying and erecting R&B approved 10 Nos. 415.25

make of LED Downlighter surface

mounted for Indoor application(a)

With 10 watt LED lamp

55 Providing & erecting Approved make 4 Nos. 2,311.02

Ceiling Fan with double ball bearing

ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep High

speed complete having 3 blades

aluminium body and blade sets having

ornamental design shanks ,canopy &

30 cms. down rod erected with 24/0.2,

3 core flexible wire with earthing.

56 Supplying & erecting single phase 2 No. 3,937.29

approved make industrial exhaust fan

suitable for medium duty ring mounted

low noise operation suitable for

medium duty having following Dia

size and maximum speed in RPM [E]

450 mm Dia 1400 RPM Cat.II

57 Supplying and erecting approved make 4 No. 2,139.83

Pedestal Circulatory fan A.C. 230V.

A.C. 50 Cy/s. 400 mm. sweep and

adjustable height complete with guard

& standard lead flexible wires and plug

58 Supplying and erecting LED well glass 5 Nos. 1,576.35

with die cast aluminium housing with

polycarbonate cover robust

construction industrial type fitting with

IP-66 Protection. (40 watt)

59 Supplying and erecting LED street 10 Nos. 6,565.00

light IP 65. 90 - 120 watt

60 Providing and erecting heavy duty 8 Nos. 8,452.33

flood light Luminaire with High

Pressure die Cast Housing with IP

(b) With 150 watt LED lamp

61 Providing and erecting Sheet Steel 2 Nos. 2,338.41

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutral link, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for three

phase incoming and single phase

horizontal type outgoing Per phase

isolation type (PPI)

sheet steel double door - 4 Way

62 Incomer: 63 A TPN MCB (C Curve) 1 Nos. 736.10

63 Outgoing: 16 A TPN MCB ( C Curve) 4 Nos. 594.87

64 Providing and erecting Sheet Steel 2 Nos. 1,491.03

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutral link, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for single

phase incoming and horizontal single

sheet steel double door - 12 Way

65 Incomer: 32 A TPN MCB (C Curve) 1 No. 594.87

66 Outgoing: 10 A DP MCB (C Curve) 12 Nos. 299.58

67 Providing and erecting Sheet Steel 2 Nos. 628.25

powder coated MCB distribution

board-flush/ surface mounted fitted

with bus bar, neutral link, earth bar and

DI Nrail, Conforms to IS 8623-1 &

IEC 61439 - 1 &3 without MCB to

house appropriate nos. of MCBs. (The

DBs should be used of same company

of MCB to be used) suitable for single

phase incoming and horizontal single

sheet steel double door - 4 Way

68 Incomer: 63 A TPN MCB (C Curve) 1 Nos. 736.10

69 Supplying & erecting approved make 1 Nos. 1,942.97

RCCB + MCB (Electromagnetic type

only working on residual current

device having 10 KA short circuit

breaking capacity and 30m Amp.

Sensitivity & 30 mili sec. tripping time

conforming to IS 12640 test knob

facility trip free mechanism operating

for rated leakage at nominal ten volt,

complete erected including all

materials lugs screws etc. completed.

32A / 40A, 2 pole Single Phase Cat. II

70 Outgoing: 16 A DP MCB ( C Curve) 12 Nos. 299.58

71 Approved make Earth fault Relay 4 Nos. 4,686.23

suitable to mount with inter connection

to moulded case circuit breaker having

CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all

internal connections & complete

erected in M.S. housing.. (1) 15 A -100

A , CT Ratio 1/100 or higher/as per

SMC officer direct

72 Approved make RCCBs conforming to 4 Nos. 1,968.64

IS: 12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action &

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. DP

73 Approved make RCCBs conforming to 4 Nos. 2,567.80

IS: 12640 and having sensitivity of

mA and Short Circuit withstand

capacity of 10 KA and suitable for

operation on single phase 240 V.

having characteristic of quick action &

tripping with all advance feature & do

not incorporate any electronic

component. for following Max. rating

erected as directed (i) 25 Amps. FP

74 Supplying & fixing box for housing 5 Nos. 273.90

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof Bakelite shield two

earthing terminals for following type of

RCCB, ELCB, ELCB + MCB [a] For

75 Supplying & fixing box for housing 5 Nos. 445.08

ELCB / ELCB + MCB combination

made of 18 SWG sheet steel duly

powder coated with gasket, dust &

vermin proof Bakelite shield two

earthing terminals for following type of

RCCB, ELCB, ELCB + MCB [a] For

76 Providing and fixing approved make 10 Nos. 6,873.14

Octagonal poles. Made from sheet

steel. The pole should be made as per

IS. and shall be coated with hot dip

galvanizing as per IS 2629/4759. with

required base plate suitable suspend

local wind speed to be erected on

existing foundation.

5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness

77 SETC of cement concrete foundation 8 Nos. 1,694.92

or for concrete filling in 1:3:6 ratio

with 20 to 25 mm stone metal duly

plastered with necessary curing for

pole muffing or any other purpose and

with necessary J Bolts. Size : 500 x

78 Spike Type earthing for poles with 1 8 Nos. 635.59

meter long G.I. wire of 3 mm thickness

79 Supply, Installation, Testing and 8 Nos. 795.16

Commissioning of Street Light pole

Single Arm Backet Size : 2 Mtr

80 Supply, Installation, Testing and 8 Nos. 683.03

Commissioning of Street Light pole

Single Arm Backet Size : 1.5 Mtr

81 Supply, Installation, Testing and 2 Nos. 418.20

Commissioning of coil type counter

poise earthing station for external

lighting pole and junction box. (2.5 mtr

long 8 SWG, Cu wire)

82 Providing & laying approved make 50 70 Rmt. 61.63

mm dia Double walled corrugated

polyethylene(conforming to IS

II )with necessary connecting

accessories of same material at

required depth for laying of cable.

below ground / road surface for

enclosing cable and back filling the

same to make ground as per original.

83 Supplying & erecting in earth pit of 2 Nos. 10,592.16

minimum bore dia. 225mm size ASH

or approved make Safe Earthing

Electrode consisting Pipe in- Pipe

Technology as per IS 3043-1987 made

of corrosion free G.I. Pipes having

Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of

40 mm having 200-250 Micron

galvanising, connection terminal dia of

14 mm with constant ohmic value

surrounded by highly conductive

compound with high charge dissipation

suitable for following type of

applications.(a) For Electrical

Installation covering Transformer

Neutrals, Lightning arrester Earthing,

Instrumentation (like PLC Panel,

SCADA)i.e. independent Earthing

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..-Length of

Pipe : 3 Mtrs.-Back filling Compound

:2 nos Bags of 25 Kg.

84 Supplying & erecting funnel type 4 Nos. 2,311.02

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below ground

with 40 kg. charcoal and salt with

alternate layers of charcoal & salt,

mm.dia. G.I. pipe with Funnel with a

wire mesh for watering & bricks

masonry block, C.I. Cover complete as

per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron /

copper earth wire No 6 SWG bolted

with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest

switch gear with end socket as per

direction & duly tested by earth tester

confirming to IS with following

(A) With 30 x 30 x 0.35 cms: C.I. earth

85 (C) with 60 x 60x 0.315 cms. Copper 4 Nos. 7,874.58

86 Supply & election required size Copper 70 kg 794.31

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors

etc. using copper clamp

87 Supply & erection required size HOT 100 kg 77.03

deep Galvanised iron strip for earthing

of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper

88 Supply & erection HOT deep 120 kg 77.03

Galvanised iron strip wire 12 SWG.

89 Supply & laying GI perforated type 150 Rmt 703.97

cable trays with returned edge/ flange,

fabricated from 2.0 mm thk sheet steel

in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication

including accessories such as coupler

plates/ fish plates, bends, tees,

reducers, elbows, covers and electro-

galvanized hardware etc, erected on

existing support as per specification

and instruction of engineer in

charge.(d) 450(W) x 35(H) x 2.0 mm

93 Supply of necessary materials and M.S. 800 kg 98.98

fabrication work (For ISMB, Square

bar, flats, Chequered plates, For C

channels, angles etc for ladder , grills

etc.) with oil paint as per details

94 4.5 Kg. Co2 type Portable fire 5 Nos. 6,590.68

extinguisher with necessary clamps,

supports and trolley.

95 Providing pair of rubber hand gloves 4 Nos. 213.98

suitable for working on 11kV/ 22kV

96 Supplying rubber matting of 6 mm 4 Sq. 1,011.01

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

97 Supplying rubber matting of 12 mm 4 Sq. 3,081.36

thickness as per IS 5424 and of Mtr

required length and breadth with good

insulation property.

98 Warning signs (11 KV & 415 V) 2 Nos. 461.15

99 Supplying stand first AID box with 2 No 299.58

antiseptic cream, medicine for use on

wounds due burn, crepe bandage,

gauge bandage, medicated ready to use

bandage (Band-aid) adhesive tape for

medicinal user, Scissors, anti-septic

solution (savlon or similar) etc. (All

above contents shall be of standard

100 Providing printed instruction chart 2 Sets 128.39

both in English and Gujarati and duly

framed with front glasses for treatment

of person suffering from Electric

101 Supplying and erecting floor mounting 8 Nos. 1,155.51

stand for keeping four nos. of FIRE

buckets comprising 1500 mm in

length, 900 mm height frame made out

of 30mm X 30 mm X 4 mm angle iron

with cross supports for legs, welded

with 4 hooks and duly painted with one

coat of red lead and two coats of

approved enamelled silver paint.

102 SETC of 10 W LED lamp operated self 4 Nos. 1,286.29

contained emergency light with dry

type maintenance free battery.

103 LIASONING CHARGES Liasoning 1 Job 21,267.76

fees for preparing necessary

documents and drawings for getting

N.O.C from supply co and Electrical

Inspector for charging the installation.(

All statutory fees will be paid by SMC

104 LIASONING CHARGES 1 Job 21,267.76

Liasoning fees for preparing necessary

documents and drawings for getting

N.O.C from factory Inspector for

factory licence of premises. (All

statutory fees will be paid by SMC ).

105 Cup Board 1 Nos. 7,454.42

106 Table 1 Nos. 4,795.95

107 Heavy Duty Office Chair 4 Nos. 3,200.58

108 Safety Helmet 0 Nos. 133.06 -

109 Safety Belt 0 Nos. 818.80 -

110 Safety Shoes Pair 0 Nos. 276.69 -

111 AUTOMATION 1 Lot 1,98,322.14

PLC Based Auto-Operation system of

Pump sets along with 1 KVA UPS and

battery back upas directed by Engineer

in Charge at sewage Pumping Station

along with 1 KVA UPS and battery

112 Supply of Desktop PC with UPS and 1 No. 79,764.66

other accessories as per detailed

technical specifications

113 Supply, Installation, Testing and 1 No. 3,732.14

Commissioning of Voltage Stabilizer

and other accessories as per Tender

114 Development of graphics of SPS & 1 Job 27,647.81

connecting automation system of SPS

115 Supply of SCADA runtime software 1 No. 1,01,287.99

with lifetime license and other required

connectivity of PLC with central

control room at drainage office.

116 Supply, Installation of Biometric 1 No. 15,296.61

Attendance System as per detailed

Tender Specifications.

117 INFORMATION BOARD AT 2 Lot 3,775.08

PUMPING STATION

Supply of Pumping Station

information board with printed eco

vinyl sheet with wooden frame, size

118 Ultrasonic Type Level Transmitter 1 Nos. 60,320.23

with Integral Display :

Design, Supply, Installation, Testing

and Commissioning of Non Contact

Ultrasonic Type Level Transmitter as

per Detailed Tender Specification

Range : 0 to 15 mtr

119 CLAMP ON ULTRASONIC FLOW 1 No. 1,84,018.97

METERSupply, Installation, Testing

and Commissioning of Clamp on

Ultrasonic Flow Meter for Common

Header as per Detailed Tender

Specification.Size : 1200 MM

120 PRESSURE TRANSMITTER 1 Nos. 29,438.47

Design, Supply, Installation, Testing

and Commissioning of Pressure

Transmitter. (Common Header)

TOTAL RATE OF CAPITAL WORK

SCHEDULE-B2 OPERATION & MAINTENANCE AUGMENTATION WORK

DESCRIPTION QTY UNIT RATE

All in all Operation and Maintenance Cost for

Augmentation Period for Three Shift of SONARI

SPS as per detailed specification mentioned in

TOTAL RATE OF OPERATION & MAINTENANCE AUGMENTATION WORK

SCHEDULE-B3 OPERATION & MAINTENANCE WORK

DESCRIPTION QTY UNIT RATE

All in all Operation & Maintenance Cost

(Manpower, Fixed Cost, Machineries

Maintenance & Variable Cost) for

Normal Operational Period for Three

Shift of SONARI as per detailed

specification mentioned in tender

Painting work as instructed by Engineer

2 in Charge for SONARI SPS as per detail 1 Job 3,00,000.00

specifications & scope of work.

TOTAL RATE OF OPERATION & MAINTENANCE WORK

Signature and Seal of The Contractor: Executive Engineer

Name and Address: Drainage Department

Date: Surat Municipal Corporation