WBPHED/AE/NIeT-07/CSD/25-26_03

Labour for hoisting and placing deptt. Bullah, beam,barga,planks etc.of Publicity tower in proper position (upto any height) at different places as directed including fitting fixing the same in position roof work of Hogla structure including supply of necessary materials and walling with transperent sheet including painting the assembled publicity tower properly with supply of necessary paints complete and dismating the same after completion of G.S. Mela 2026 a) Height 5.50 mtr

Supply of the following materials at store of Ganga Sagar with challans as per specification and direction of Engineer in charge.

a) Supplying, fitting, fixing bolts with nuts, washer: 10 to 16 mm dia. B) Length above 75 mm upto 150mm.

b) U.C. Ballah (225 mm dia)

c) U.C. Ballah (200 mm dia)

d) U.C. Bullah of dia 150mm

e) Supplying, fitting and fixing glass reinforced polyester translucent fiber glass sheet to match with GCI Corrugation as per IS: 12866 - 1989 in roof fitted and fixed with 10 mm dia "J" or "L" hook, bolts and nuts, limpet and bitumen washers and putty with 150mm end lap and one corrugation minimum side lap complete. a) 1.6mm +/- 0.2 mm thick sheet.(2.6Kg/Sq.m) i) Natural white or tinted blue colour

h) Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor) (On hire basis) (ii) In wall:- b) With 0.63 mm thick sheet

Engagement of Carpenter for setting bullah of tower

a) Carpenter (Head)

b) Carpenter (Ordinary)

b) Helper

Painting with ready mixed Black Japan of approved make and brand including smoothening surface (b) Two coats

Materials carriage by Van from Office Godown to destination point & returned the same to office godown including loading, unloading and staking.

Materials carriage by Head Load from Concrete Road to Sea Beach Tower Point.(Up and down) (Ordinary Mazdoor)

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- harge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (ii) 6mm

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local.

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating (1/2 of Schedule rate i.e. 1991/2)

Hire Charges of Generator including fuel and operator and other acceossries (6 nos. x 16 days = 96 nos.)

Add Rivering @ 30% on item no. 2,4,7,8,9,10,11 on Rs. 249142.80

Add 18% G.S.T. all item on Rs.

Add 1% Cess all item on Rs.