NIT NO. 25 ITEM NO. 09

Supply of SHM 150/26N Pump having solid handling non clog sewage pump set of head 16mtr discharge 390 M3/Hr C.I. impeller , S.S. Shaft & sleeve pump coupled by tyre coupling or equivalent and coupled with 40 HP 3 phase Squirrel cage induction motor , 3 phase, 415 Volts, AC supply, 1450 RPM with base frame. Make:- Kirloskar /M&P/beacon/ABB/Crompton/Any DJB Aprroved

Making of Cement Concrete foundation suitable for above pump set with all material like cement concrete, sand, plastering i/c supply and grouting of foundation bolts etc. as required.

Supply of CI Rising sluice valve PN1.0, with SS Spindle, flanged ends of follow size. 150mm. Make:- Kirloskar/IVC.

Supply of CI NRV PN 1.0 150mm size Make:- Kirloskar/IVC.

Supply of MS pipe heavy duty of 150mm dia. Make:Tata/Jindal

Supply of 150mm dia. Ms Bend. Make: Tata/Jindal

Supply and fixing MS Tee of size 300mm x 150mm and delivery of both pump set connect into 300mm header as per site requirement. with all respect.

Supply of Nut-Bolt & with washer of good quality.

Supply of neoprene rubber sheet 6mm. Make:- Jyoti.

Installation of above 2 Nos. 40 HP motor pump set along with all piping works, fixing of valves, and allied , mechanical and civil works i/c watch and ward, cartage, taking all safety precautions, Arranging all tools and tackles i/c welding set, gas cutter etc.

PVC insulated copper flexible cable single core 25 Sq mm Make: Havells/Finolex.

Fabrication of LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP-54 protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipments of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1000MM x900MMx350MM. Having following components of approved make. a). MCCB 415V, TP 3phase High breaking capacity 50KA 50Hz,200Amp with spreader terminal - Make L&T/Siemens – 01 No. b). MCCB 415V, TP3phase 50Hz,100Amp with spreader terminal- Make L&T/Siemens. – 02 Nos. c). MCB 415V, TP 3phase 50Hz,63Amp with spreader terminal- Make L&T/Siemens- -01 No. d). MCB 415V, TP 3phase 50Hz,32Amp with spreader terminal - Make L&T/Siemens.-01 No. e). MCB Single pole 6Amp. Make L&T/Siemens.-05 Nos. f). Power capacitors 415V unit of 20Kvar Make: Epcos/L&T.- 02 Nos. g). Thermal over load relay with single phasing preventer 30-50 Amp range Make: L&T/Siemens. 02 Nos. h). Amp. Meter Analog Make AE/L&T.- 03 Nos. i). Volt Meter Analog Make AE/L&T.- 01 No. j). Power contactor 220V 3phase 40Amp. Make L&T/Siemens.- 06 Nos. k) Star delta timer on delay (0-30 sec.) make: L&T/Siemens.- 02 Nos. n). Indicating lights LED type RYB & On/OFF Make : L&T /Havells/Siemens.-09 Nos. l). Current Transformer400/5 Make AE /Saviour. -03 Nos m). Current Transformer75/5Make AE /Saviour. -06 Nos. n). On load change over switch 200Amp. Open execution type Make: L&T/Havells. 01 Nos.

Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hard wares, control wiring in 1.5sq mm wire complete in all respect.

Providing & Fixing of PVC insulated copper flexible cable single core 25 Sq mm for existing pumpset Make: Havells/Finolex

Providing & Fixing of PVC insulated copper flexible cable single core 16 Sq mm for existing pumpset Make: Havells/Finolex

Providing & Fixing of 3.5 core 120 Sq. mm armoured aluminium conductor PVC insulated and PVC sheathed/XLPE cable 1.1 KV confirming to IS 1554/1/88 with latest amendment. Make-Polycab/Havells and any approved make by DJB

Providing/Fixing of Earthing of all electrical equipments including motors ,LT Panels etc

Testing and commissioning of Panel as per required parameters with relevant IS testing of the panel prior to switching on as follows. Continuity and earth testing. Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth.Checking for all tightness of nut and bolts.Alignment of doors etc.Interlocking tests.All function tests

P.K. Electricals

Goodwill Enterprises

paramount systems

Sarvottam Sales and Services

AQUA GASEOUS CONTROLS (INDIA)