REPAIR/MAINT OF ROADS AND ROAD SIDE FURNITURE IN NORTH COMPLEX AT IMA DEHRADUN

Amount

M&L for repair to pot holes any depth, not exc 1.00 sqm in each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 30mm thick in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premixed bituminous macadem, well rammed & sealed with binder @ 9.8 Kg per 10 sqm blinded with 0.09 cum of stone chipping again well rammed (including supply of premix binder and sand) depth of potholes n exc 30 mm complete all as specified and directed.

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and exc 50mm but n. exc 100mm deep complete all as specified and directed.

M&L for WBM 75 mm thick (compacted thickness) with course aggregates grading 2(63 to 40 mm size) of flint or quartzite stone spread, watered, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat (paving bitumen) with bituminous primer @ 10Kg/10 Sqm using paving bitumen VG-10 complete all as specified and directed.

M&L for preparation of black top surface by brushing with mechanical broomer for removing caked mud etc sweeping with mechanical broomers and finally with air compressors to remove all loose dist etc, having black top surface and applying evenly a priming/tack coat with paving bitumin VG-10 @ 5kg per 10 Sqm on bituminous surface complete all as specified and directed.

M&L for premixed bituminous macadam laid/rolled with power roller 8 to 12 tone roller and compacted to required gradient & camber (consolidated thickness 75mm or less) and binder content @ 4% (Viscosity grade Bitumen VG-30) by weight of total mix all as specified laid over priming/tack coat complete all as specified and directed.

M&L for bituminous premix asphaltic semi-dense concrete 25mm consolidated thickness using viscosity grade VG-10 @ 5.5% binder content by weight of total mix rolled and compacted with vibromatic roller to required camber and gradient complete all as specified and directed.

M&L for Bituminous premix asphaltic semi-dense concrete 30mm consolidated thickness using viscosity grade VG-30 @ 5.5% binder content by weight of total mix rolled and compacted with vibromatic roller to required camber and gradient complete all as specified and directed.

Material and labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.

S&F high intensity grade shedding retro reflective delineator post 75mm outer dia, heavy duty steel pipe 1.2m long head cap by hydraulic machine design and hold fast welded on delineator post bottom with one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded embedded in ground in 30x30x40cm deep pit (including excavation and removal of soil) filled with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregated) and up to 30 cm high above ground level, necessary from work including taking out of old unserviceable delineator complete all as specified and directed.

S&F Solar road stud having 3 LED's of colours red/yellow/blue/green tough pressure dia casted aluminium alloy of size 125x125mm f height 20mm with fixing with epoxy, LED's solar cells battery & light sensor well protected in side under tough unbreakable poly carbonate transparent sheet roof system workable for 3-4 (nights) after full charge in 8-10hours including removal of old unserviceable stud complete all as specified and directed.

S&F cat eye's dual directional reflective of tough poly carbonate of retro reflective glass beads of colour white/red/yellow side provided with including removal of old unserviceable stud.

Sharda Enterprises

M/S BRIJPAL SINGH MALIK

SARASWATI CONSTRUCTION CO

HARBIR SINGH