GE863/EWS-T-31 OF 2023-24

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete, all as specified and directed.

Demolition of block masonry or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets, complete, all as specified and directed.

M & L for providing cement concrete, type C1 1:3:6, using 20mm well graded stone aggregate as in coping, complete, all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

M&L for stone walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar (1:6), complete, all as specified and as directed.

M &L for pre-cast cement concrete, type C1 (1:3:6), using 20mm using well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M&L precast PCC, type C1(1:3:6), using 20mm well graded stone aggregate as in bond stone set in Cement Mortar (1:6), complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar all as specified and directed.

M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in Cement Mortar (1:3), complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster (1:4) using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.

M & L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.

M & L for rendering 10 mm thick Cement mortar on stone masonry surfaces or surface other than fair face of brick-work/concrete surfaces in Cement plaster (1:6) and finished even and smooth (without using extra cement), complete, all as specified and directed.

Supply only integral water proofing compound of approved brand/make, complete, all as specified and directed.

M&L for preparation of newly plastered/unplastered surface of walls and applying two coat of cement base paint over a coat of cement primer, complete, all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 2 mm thick wall care putty on walls, complete, all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper, complete, all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash, complete, all as specified and directed.

S&F anodised aluminium snap grid of size 605 X 605 mm frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete, all as specified and directed.

All as per Item No 25.00 here in before but EXCEPT Anodised Aluminium snap grid of size 605 X 605 mm frame work for false ceiling including hangers 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, complete all as specified and directed. (Note:- Snap grid of size 605 X 605 mm including hanger & cleats shall be reused as retrieved from item No 05.00)

S&F Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmX600mm grid (frame work for ceiling shall be measured and paid seprately), complete, all as specified and directed.

All as per Item No 27.00 here in before bu EXCEPT 8mm thick calcium silicate board complete all as specified and as directed. (Note:- 8mm thick calcium silicate board shall be reused as retrieved from item No 05.00), complete, all as specified and as directed.

M & L for Joint free Non skid coloured ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M & L for Joint free Non skid coloured ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick cement redering in Cement Mortar (1:4), complete, all as specified and as directed.

M & L for Joint free Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar (1:6), complete, all as specifed and as directed.

M&L for Glazed clolour ceramic tiles of size 450X 300X 7mm thick as in vertical surfaces/dado laid over 10mm thick rendering as back coat in Cement Mortar (1:4) etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment, complete, all as specifed and as directed.

M & L for coloured chequered cement concrete tiles 20 cm x 20 cm x 25 mm/ 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over 15 mm thick screed bed in cement mortar (1:4) as in floors with mixture of white and grey cement, complete, all as specified and directed.

M & L for coloured chequered cement concrete tiles 20 cm x 20 cm x 25 mm/ 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over over 10mm thick rendering as back coat in cement mortar (1:4) as in verticle surfaces with mixture of white and grey cement, complete, all as specified and directed.

M/L for 25mm thick cement concrete, type B-0 1:2:4, (using 12.5 mm well graded stone aggregate) as in levelling course in floors etc, complete, all as specified and as directed.

M & L for provding cement concrete type, C1 1:3:6, using 20mm well graded stone aggregate as in roof kerb or mud stops, round on edges etc, complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters including remove to store, (without taking off shutters from the frames), complete, all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters including remove to store,(without taking off shutters from the frames), complete, all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,complete, all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete, all as specified and directed.

S&F 1.25 mm thick Pressed Mild steel frames of size 165x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

M & L for providing cement concrete type C1, (1:3:6), using 20mm well graded stone aggregate as in hold fast blocks including necessary form work, complete, all as specified and directed.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165, complete, all as specified and directed.

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a), complete, all as specifed and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face veneer with lipping/frame to match on both sides, complete, all as specified and as directed.

M&L for Pre-cast cement concrete solid block masonry in PCC, 1:3:6,type C-1 (using 20 mm well aggregate stone aggregate) as in wall 10 cm thick and setting in Cement Mortar (1:4), complete, all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick as in floor, shelf etc over 15mm thick screed bed in Cement Mortar (1:6) base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed

M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 mm thick bent to shape incl two coats of synthetic enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

S & F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc,complete, all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed.

Taking down steel window/ventilator including guard bar, complete, all as specified and directed.

S&F Box type steel windows with pintol hinges, 2 Nos 150 mm mild steel tower bolts to each shutter with steel handle and steel peg stay and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete, all as specified and directed.

All as per item No 52 here in before but without glazing bars, complete, all as specified and directed.

S&F steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded, complete, all as specified and directed.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded, complete, all as specified and directed.

Supply and fabrication of framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint), compelete, all as specified and directed.

M&L 75 mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement, laid in alternate panels, including forming joints at 2 mtr intervals and filled with bitumen mastics, complete, all as specified and directed.

S & F stainless steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete, all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,complete, all as specifed and as directed

S&F sheet glass, 4mm thick figured glass pin head type and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S & F 150 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.

S & F 125 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 200mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and asdirected.

S & F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete.

S&F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

S&F 20 mm dia brass chromium plated towel rail of length 450 mm including one pair of fixing brackets, complete, all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140 mm, complete, all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete, all as specified and directed.

S&F in repair soap dish any type, fixed to plugs with chromium plated brass screws, complete, all as specified and directed.

S&F in repair MS chromium plated peg set of five fixing with wall, complete, all as specified and directed.

Taking up or down 25 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site , complete all as specified and directed.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site, complete, all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site, complete, all as specified and directed.

S & F 25 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F 20 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F 15 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white ( flushing cistern ) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, viterious China, pedestal pattern WC including PVC seat cover and flush pipe etc, complete, all as specified and directed.

S&F 10 ltr capacity PVC valveless symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ), complete, all specified and directed.

Supply and fix, brass CP mixer 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, includng connecting to WBH and making good the disturbed surfaces, as in repairs, complete all as specifioed and dierected. Make: MARC /ESS ESS /SS/ PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

Supply and fix, brass CP wall mixer 15mm bore for mixing hot and cold water screwed down for iron pipe for wall, includng connection to shower and making good the disturbed surfaces, as in repairs, comnplete all as specified and directed. Make: MARC /ESS ESS / PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

Supply and fix, Hand shower (Health foucet), cast copper alloy, chromium plated, with and including 1.00m long, PVC flexible tube and with book, as in repairs compete all as specified and as directed.Make:Make: MARC /ESS ESS /SS/ PRAYAG/CERA /JAQUAR/PRIMA/ESSCO/HINDWARE

S&F in repairs 15mm dia. two way fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S&F in repairs 15mm dia. fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S&F in repairs stop valves/angle valve of cast copper alloy, 15mm bore fancy type chromium plated, screwed down, high pressure screwed both ends for iron pipe or for unions, fixed, complete, all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete, all as specified and directed.

S&F Cast Iron floor trap 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete, all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150mm dia set in cement mortar, complete, all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete (1:3:6) type C-2 using 40 mm well graded stone aggregate for 150 mm dia pipe, complete, all as specified and directed.

Supply, laying, jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete, all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid seperately)

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100mm/110mm bore, complete, all as specified and directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete, all as and specified directed

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed on wall with MS clamp, complete, alll as specified and directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors, complete, all as specified and directed.

S&F 75 mm dia PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors, complete, all as specifed and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed on wall with MS clamp, complete, alll as specified and directed.

S&F 110 mm dia. PVC (SWR) branch pieces single socketed Y equal or unequal, complete, all as specified and as directed.

S&F 110 mm dia bore PVC (SWR) bends any radius, complete, all as specified and directed.

S & F 75 mm dia bore PVC (SWR) bends with access door any radius, complete, all as specified and directed.

S&F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal, complete, all as specified and directed.

S&F 110mm dia. PVC (SWR) vent cowl, complete, all as specified and as directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store, complete, all as specified and directed.

S&F Rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed screwable top cover ), 1000 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, 20 mm dia ,ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete, all as specified and directed.

S&F roof trusess (framed), vertical pole, trussed ,purline, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces,cleats etc confirming to Fe 410-W (grade -E-250) quality A, complete, all as specified and directed.

S&F Reinforced Precast Cement Concrete (1:3:6), type C1 (Using 20 mm well graded stone aggregate) in landings, cover slabs, (for manholes etc.), drain cover, shelves and similar articles with plain faces and set in cement mortar (1:4), complete, all as specified and directed.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing wire, complete, all as specified and directed.

S&F Mild steel TMT 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips, complete, all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete, all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil, complete, all as specified and directed.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete, all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over & including 25mm thick sand cushion.The interlocking joints shall be filled with fine sand, complete, all as specified and directed.

M&L for 75 mm thick PCC (1:4:8), type D2, using 40mm well graded stone aggregate as in Sub base of flooring/hardstanding , complete, all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good to disturbed surfaces of walls, floors, etc, complete, all as specified and directed.

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded ,1100 volts grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories heavy duty ,having ISI mark , fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet or providing suitable PVC gang box) on top for fixing switches, sockets etc complete all as specified for one light point/ fan bell point controlled by one switch, complete, all, as specified and directed.

All as per Srl item No 121 here-in-before but controlled with one 3 pin socket outlet 15 Amp independent board with 2.5 sqmm wire, complete, all as specified and as directed

All as per Srl item No 121 here-in-before but controlled with one 3 pin socket outlet 5 Amp on independent board with 1.5 sqmm wire, complete, all as specified and as directed

All as per Srl item No 121 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with 1.5 sqmm wire, complete, all as specified and as directed

Supply and fixing switch piano type 5 Amp, 230 volt, flush button single pole one way, complete, all as specified and as directed

Supply and fixing socket outlet multi pin 5 Amp 2-in-one 230 volt flush type, complete, all as specified and as directed

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.

Supply and fixing socket outlet multi pin 15 Amp 2-in-one 230 volt flush type, complete, all as specified and as directed

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc for ceiling fan 1200 / 1400 mm sweep, complete, all as specified and directed.

Supply & Fixing Ceiling Rose, 3 phase polycarbonate isolated body including junction round pvc cover plate with brass screw/nuts, complete, all as specified and directed.

S&F lamp holder, PVC/ Polycarbonte type with back plate suitable for batten/pendant fittings, complete, all as specified and directed.

Supply & Fixing LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), decorative ultra slim square profile LED lighting fixture with extruded polycarbonate housing, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete, all as specified and directed.

Supply and fixing LED light fitting 10W(2 ft), 220 volt AC, having colour temperature daylight (6500K), decorative ultra slim square profile LED lighting fixture with extruded polycarbonate housing, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete, all as specified and directed.

Supply and fixing in replacement of LED 10 W Bulk head luminaire, compact modern design utility with high energy savings, complete, all as specified and directed.

S&F in replacment sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt with 200 Amps rated bus bar complete with bus and neutral link,complete, all as per specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCB), SPN, 40 Amps rating 240V, 10KA 'B' curve in the MCB DB complete with connection, testing and commissioning, complete, all as specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCB), SP, 6-20 Amps rating 240V, 10KA 'B' curve in the MCB DB complete with connection, testing and commissioning, complete, all as specified and directed.

Supply and fixing in replacement sheet metal enclosure single pole & neutral with a two pin & earth plug and socket etc complete with one single pole 'B' series MCB 20 Amps, 240 Volts, complete, all as specified and directed.

M&L in replacement submain wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Casing capping with accessories fixed on wall /ceiling with GI screws complete with 3 runs of 6.0 sq mm copper conductor, complete, all as specified and directed.

Material & labour in replacement earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below ground level at any type of strata) with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate connected with galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers as earth lead including concrete chamber of PCC 1:3:6 type C1 (using 20mm graded stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mmx300mm, 15mm thick plaster in CM 1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size in (1:2:4) Type B1 (using 20mm graded stone aggregate ) reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1 (2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm bore dia light grade GI pipe for protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note : RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.

Supply, laying, commisioining and testing in replacement cable XLPE insulated IS 7098 (Part-I)-1988, ISI marked, screened, PVC sheathed, steel armoured electric power cable (heavy duty) with aluminium stranded conductor for working voltage upto and including 1100 volts, cross sectional area of cable 10 sq mm 2.0 core laid in trenches/fixed on pole/wall/passed through pipe /cutting of road with making good wherever required as per site including jointing and testing complete all as specified & directed . NOTE: The earth work, GI Pipe shall be measured and paid seperately under appropriate item of Schedule 'A' / BOQ.

Note:- The total shall subject to adjustment of credit of Rs 88283.20 for old Materials as per Schedule of Credit.

SANTOSH KUMAR