Construction Multipurpose Indoor Sports Hall at Jaisinghpur, Distt. Kangra, H.P.

Earth work in Excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling and any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetra 80 mm (eighty millimetre diametre) including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetres) in depth, including consolidating each deposited layer by ramming, watering, etcetre and disposing of surplus excavated soil as directed, within all lead, lifts complete in all respect including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetra and mass concrete including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, for all height/depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings, balconies and access platform, shelves and the like floor etcetera In all thickness upto all floor level including entire carriage of materials with in all leads,lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams,beam haunchings, cantilevers, girders, bressumers and lintels upto any height/depth upto all floor level including entire carriage of materials with in all leads, lifts and other incidential as per drawings, technical specifications and as per the direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutment, Posts and struts upto all floor level including entire carriage of materials within all leads lifts and other incidential as per drawings, technical specifications or as per the direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies, for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Cases with sloping or stepped soffits excluding landing upto all floor level including entire carriage of materials with in all leads, lifts and other incidentials as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies for all heights / depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and all floor level including entire carriage of materials within all leads, lifts and upto any other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government..