DAY TO DAY MAINTENANCE REPAIR TO SEWAGE LINES VERTICAL STACKS SEPTIC TANKS SOKAGE WELLS MANHOLES SEWAGE CLEANING CLEANING OF COVERED DRAIN AND CULVERTS RCC COVER SLAB ETC AND ALLIED WORKS TO OFFICERS MD ACCN AT NAVAL PARK AND AMZARI UNDER AGE B

Amount

Note : The rates quoted by the tenderer shall be deeemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents: (a) The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge.The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. (b) The contractor on getting information through site order/Works dairy regarding the nature of repair to be carried out, he shall immediately respond to the same and make all efforts to carry out the same on priority within 48 Hrs. (c) It is the responsibilty of the Contractor to make suitable arrangements for attending the repairs simultaneosly at all the places of the work.

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

110 mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make: Kisan Mouldings Limited / Supreme / Prince

110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

75 mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Infra

75 mm PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

Dismantling of 100mm bore cast iron or reinforced concrete drain pipes, including fittings viz., bends, tee, jointed in cement mortar and taking out of from walls complete all as specified and as directed.

100mm dia Cast iron soil, waste and vent pipes in any length sand cast (ISI Marked) with or without ears, with cement joints but fixed to walls complete all as specified and as directed. Make : Electrosteel / Kesoram / Tisco

100 mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Dismantling of 75mm bore cast iron or reinforced concrete drain pipes, including fittings viz., bends, tee, jointed in cement mortar and taking out of from walls upto 10th storey complete all as specified and as directed.

75 mm dia Cast Iron soil, waste and vent pipes in any length sand cast (ISI Marked) with or without ears, with cement joints but fixed to walls complete all as specified and as directed. Make: Electrosteel / Kesoram / Tisco

75 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

In repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or errecting stand including pedestal complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs Vitreous China Squatting pan of pattern long pan, size 580 mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

In repairs PTMT health faucet along with 1 m long flexible tube and holding stand including all necessary fitting complete all as specified and as directed. Make : Water tec / Prayag

In repairs Health Faucet with 1m long flexible tube, wall hook, non return valve complete all as specified and as directed. Make: Jaquar Allied range Model No. 577 / Plumber / Parko

In repairs 110 mm Stainless steel grating fixed with white cement complete all as specified and as directed.

In repairs Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make: Jaquar & Company Pvt. Ltd. / Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine /Hindware

in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make: Jaquar & Company Pvt. Ltd. / Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine /Hindware

15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed in repairs complete all as specified and as directed. Make : Water tec / Prayag

15mm bore, 60 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed in repairs complete all as specified and as directed. Make : Water tec / Prayag

Low density waste pipe 32 mm dia for working pressure rating 4 Kg / Sqcm with polyethylene union and check nuts 75 cm long suitable for steel sink waste fixed in repairs complete all as specified and as directed.

Low density waste pipe 40 mm dia for working pressure rating 4 Kg / Sqcm with polyethylene union and check nuts 75 cm long suitable for steel sink waste fixed in repairs complete all as specified and as directed.

In repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device (Indian / Anglo indian) complete all as specified and as directed. Make :Johnson pedder / Parryware / Cera

In repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

In repairs PVC syphon kit (any type / any pattern ) suitable for 10 ltrs capacity low level flushing cistern and make functional complete all as specified and as directed. Make : Slimline / Cera / Hindware or any other make as existing at site.

Repairs to PVC flusing cistern handles & washers etc complete all as specified and as directed. Make : Slimline / Cera / Hindware or any other make as existing at site.

Sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and as directed. MAKE : M/S BLUE STAR / M/S JAYNA / NIRALI

Sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and as directed. MAKE : M/S BLUE STAR / M/S JAYNA / NIRALI

In repairs Stainless Steel Plate Rack of size 600 mm X 750 mm X 220 mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and as directed. Make : Blue Star model No. KPR-311 / M/S JAYNA / NIRALI

In repairs Stainless Steel Plate Rack of size 900 mm X 750 mm X 250 mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and as directed. Make : Blue Star model No. KPR-315 / M/S JAYNA / NIRALI

In repairs 15 mm dia brass spindle(Heavy),for bib tap / stop cock / pillar tap complete all as specified and as directed. Make : Plaza / Kingston

In repairs 15mm dia brass Concealed stop cock spindle(Heavy) ,for bib tap / stop cock / pillar tap ccomplete all as specified and as directed. Make : Plaza / Kingston

Disconnecting existing tanks setting aside ( or lowering if required) for hoisting if required reconnecting & refixing in position and Cleaning and removing all scale dirt etc.from mouths of circulating pipes of loft tanks in kitchen etc.of capacity n.exc.250 ltrs complete all as specified and as directed.

Dismantling water tanks of capacity in litres n.exc. 250 litres complete all as specified and as directed.

In repairs PVC Loft water tanks 225 ltrs capacity including transporting, fixing and hoisting complete all as specified and as directed. Make : Sintex / Polycon / Rotex / Polywell

Rotational moulded Polyethylene water storage tanks (Cylindrical vertical with closed top) 1000 litres capacity including taking down complete all as specified and as directed. Make : Sintex / Polycon / Rotex / Polywell

Rotational moulded Polyethylene water storage tanks (Cylindrical vertical with closed top) 500 litres capacity including taking down complete all as specified and as directed. Make : Sintex / Polycon / Rotex / Polywell.

S & F lid for 500/1000 litres capacity rotational moulded Polyethylene water storage tanks including taking down complete all as specified and as directed. Make : Sintex / Polycon / Rotex / Polywell

S & F lid for 2000 litres capacity rotational moulded Polyethylene water storage tanks including taking down complete all as specified and as directed. Make : Sintex / Polycon / Rotex / Polywell

Disconnecting existing tanks setting aside ( or lowering if required) for hoisting if required reconnecting & refixing in position and Cleaning and removing all scale dirt etc.from mouths of circulating pipes of tanks in etc.of capacity exc.250 ltrs n.exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks setting aside ( or lowering if required) for hoisting if required reconnecting & refixing in position and Cleaning and removing all scale dirt etc.from mouths of circulating pipes of tanks in etc.of capacity exc.500 ltrs n.exc 1000 ltrs complete all as specified and as directed.

In repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

In repiars gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Taking up or down 20mm bore water tubing and connections complete all as specified and as directed.

Supply and lay 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Ashirwad Flowguard / Kisan / Reliance / Supreme / Prince

Taking up or down 25 mm bore water tubing and connections, complete all as specified and as directed.

Supply and lay 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make :Astral / Ashirwad Flowguard / Kisan / Reliance / Supreme / Prince

In repairs 25 mm bore Ball / Gate Valve for connecting 25mm CPVC pipes including all necessary items complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.

15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.

25 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 32 mm bore steel tubing and connections, complete all as specified and as directed.

32mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Taking up or down 50 mm bore steel tubing and connections, complete all as specified and as directed.

S & F 50mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm bore iron pipe or for unions, in repairs complete all as specified and as directed. Make : SEIKO/GEM/SONA

Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions in repairs complete all as specified and as directed. Make : SEIKO/GEM/SONA

Gun-metal, globe or gate valves 50 mm, with iron wheel head, screwed both end for iron pipe and fixed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe, in repairs complete all as specified and as directed. Make : SEIKO/GEM/SONA

Pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe in repairs complete all as specified and as directed. Make : GEM/ SOMA/ PARKO/ CRABTREE

In repairs 15mm bore pillar taps fancy type, Swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Make : CERA/M/s Hindware / Orient / Seiko / Dripless

Brass chromium plated, angle cock, screwed fo 15 mm bore iron pipe fixed in repairs complete all as specified and as directed. Make : SEIKO/GEM/SONA

In repairs 120 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed. Make : SEIKO/GEM/SONA

Cleaning of blockages in the internal water supply lines concealed or fixed on the wall or floor surfaces by dismantling the fittings such as taps, valves,unions etc to facilitate / stimulate clearance of blockages / airlocks,Re-fixing the dismantled items after clearance of blockage / airlocks including necessary fittings complete all as specified and as directed.

Removing kitchen drain blocks from waste pipes by removing grateings, waste material from traps, bends etc carefully and rodding with flexible GI wires to remove to clear blockings including dirposing the waste material complete all as specified and as directed.

Removing blockage from soil pipes or from wcs by carefully rodding soil pipe with split bamboos or flexible gi wire etc including cleaning the toilet by flushing water and disposing any removed soiled material complete all as specified and as directed.

Taking down wash hand basin or sink of any size including refixing with MS angle new brackets / rag bolts in the same place complete all as specified and as directed.

Filling of cement mortar in sides of nahani trap, gully trap, rain water pipes out let etc. in CM 1:3 including WPC @ 2% by weight of cement or as per manufacturers instructions and making good finishes to arrest leakage / seepage complete all as specified and as directed.

In repairs PVC Body Cabinet Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and as directed. Make: Supreme / National / Alphina / Prayag

Fancy type wall mounted bevelled edged looking mirror of size (900mm X 600 mm), 5mm thick complete all as specified and as directed.

In repairs 15mm bore Bib tap complete all as specified and as directed. Make : Jaquar Cat. No. FLR 5047 N

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Taking down chowkhat or frame with shutter n.exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F of Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note for PVC shutter and frame : Make of PVC frame / shutter / ventilator shall be of make Sintex or equivalent in Nandi / Rajshri Plasti Wood.

100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

150mm [ ISI marked ] Aluminium anodised extruded tower bolts of extruded section and fixed complete all as specified and as directed.

150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

In repairs [ ISI marked ]100 mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

In repairs 60cm long [ ISI marked ] Aluminium anodized tubular towel rail 20mm dia, 'D' type complete all as specified and as directed.

In repairs door clooser Aluminium extrude section body hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. Make : Godrej / Everite / Priya

In repairs 40mm dia, cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repairs complete all as specified and as directed. Make : Anchor / Novopan / Deco Board / Bhutan Board / Kitply / Eco Board / Archidlam / Asis / Greenply Industries

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. [Grounf floor to 10th storey].

3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sq.m. in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5sq.m in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

In repairs [ ISI marked ] aluminium plate type II gate and shutter, hook & eye 125mm size complete all as specified and as directed.

In repairs [ ISI marked ] 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

In repairs [ ISI marked ] 75 mm long medium weight, cold rolled mild steel butt hinge complete all as specified and as directed..

In repairs [ ISI marked ] 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

In repairs [ ISI marked ]150 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

In repairs [ ISI marked ] 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

In repairs [ ISI marked ] 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

In repairs [ ISI marked ] 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

In repairs of floor door stopper [ ISI marked ] of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

In repairs [ ISI marked ] 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

In repairs [ ISI marked ] 200mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

In repairs PVC coated MS Curtain rods 25m dia complete all as specified and as directed.

In repairs PVC Curtain rod side balls 25m dia complete all as specified and as directed.

First class hard wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads not exc 3 sqcm complete all as specified and as directed.

In repairs Night Latch, Vertical type, Brass body of size 100 X 67 X 26 mm, and 7 Levers with 3 keys of Godrej Make, complete all as specified and as directed.

In repairs Mortise Lock, Vertical type of size 75 mm, 6 Levers with 2 keys of Godrej Make, complete all as specified and as directed.

In repairs to broken or wornout MS hinges of garrage steel doors by welding / rivetting including painting and making good the sorrounding surfaces complete all as specified and as directed.

S&F Aluminium alloy wire mesh cloth, 0.45mm nominal dia average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

In repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of , aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

Taking down wooden doors / Window shutters / PVC doors / ventilators of any size carrying out minor repairs / adjacement including replacement of necessary fittings of as required size and refixing in same position complete all as specified and as directed.

Taking down the existing locking system, contains any number of levers replacing the strucked / damaged levers, applying oil to all parts and making functional properly and refixed in position complete all as specified and as directed.

In repairs continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed.

In repairs 18 mm thick water proof plywood, MR grade fixed with nails to timber frame work complete all as specified and as directed. Make : Greenply Industries [Ply & Board Division] / Kitply / Century / National Plywood Industries Pvt. Ltd. / Archid Ply/ Sylvan Ply

0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. Make : Sunmica / Greenlam

In repairs 375 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Aluminium anodised curtain rails with brackets, stops & rollers etc of any length fixed in reparis complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing ), complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc. complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in floors complete all as specified and as directed.

M&L for Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes

M&L for 20 mm thick screed bed or bedding layer of mortar for laying floor finishes in cm 1:6 complete all as specified.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cm(1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Glazed ceramic colour tiles of size 450x300x7mm thick on vertical surface set in neat cement slurry and pointed in white or coloured cement to match, over cement mortar 1:4, 10 mm thick for backing coat plastering complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over cement mortar 1:4, 10 mm thick for backing coat plastering complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cm(1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Vitrified tiles 10 mm thick (square/ rectangular) Light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in cm(1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM (1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

75 mm Cement concrete type B-1, 1:2:4 (40mm graded stone aggregate) in sub base of flooring/ hard standing.

Designer 300x300mm chequered cement concrete coloured / multycoloured with glossy finish tiles, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the tiles including screed bed 15 mm thick in CM (1:6) complete all as specified and as directed. Make: Ultra / Bansal / Nitco / Anjali / Multiwyn

16-18 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. (Note: plastering work at any height necessary scaffolding , safety belts to be required) complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on Brick / stone masonry surfaces finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Preparing newly plastered surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Preparing new surfaces and applying two coat of weather proof emulsion paint over a coat of primer complete all as specified and as directed. Make : Apex from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

Cutting of saplings of any size from buildings in any situation & at any height including removal of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and as directed.

300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed in repairs complete all as specified and as directed.

ATT At points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed.

Complete removal of existing treatment on walls / slab and applying two coats of water proofing chemical Dr. Fixit New Coat EZEE over a coat of Dr.Fixit prime seal coat Mfd by Pidilite Industries complete all as specified and as directed.

Applying silicon sealnt on joints of wall, cill, jambs roof etc. complete all as specified and as directed.

Granite floor strips of 18 to 25 mm thick , width not exceeding 10cm for the door cills fixed with approved quality adhesive complete all as specified and as directed.

In repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. Note: Make of the item shall be of M/s. Kelywn or as aprroved by GE.

Dismantling of wall and ceilng boards or blankets, any thickness including GI Grid frames complete all as specified and as directed.

Providing and fixing suspended false ceiling, which includes providing and fixing GI ultra perimeter channels of size 0.55 mm thick having one flange of 20 mm and another flange of 30 mm and a web of 27 mm alongwith perimeter of ceiling, screw fixed to brickwall/partition with the help of nylon sleeves and screws, at 610 mm centres. then suspending GI ultra intermidieate channels of size 45 mm , 0.9 mm thick with two flanges of 15 mm each from the soffit at 1220 mm centres with ultra ceiling angle of width 25mmx10mmx0.55 mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ultra ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the ultra intermidieate channel with the help of connecting clips and in direction perpendicular to the ultra intermidieate channel at 457 mm centres. 12.5 mm tapered edge Gypboard (Confirming to IS-2095-1982) is then screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards are to be jointed and finished so as to have a flush look which includes filling & finishing the tapered and square edges of the boards with jointing conmpound, paper tape and two coats of plastic emulson paint over 3mm thick putty complete all as specified and as directed.

In repairs Vitreous oval shape china wash hand basin white with counter top 430mm including brackets, waste coupling PVC waste pipe complete all as specified and as directed. Make Cera Cat No. : COLUMBIA 7753

In repairs Magnetic catch for cup boards complete all as specified and as directed.

FRP sheets 2mm thick as in covering to grills or as view cutter, fixed with self tapping screws as specified. complete all as specified and as directed.

In repairs 5mm thick rubber beading strips of entrance doors havning width exc 3cm to nexc 5cm to arrest entry insects complete all as specified and as directed

Ball valves 50mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed

Ball valves 40mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed

Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed

Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed

Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and as directed

Grinding of existing terrazzo floor with suitable grit size carborandum stones and removing black spots and other faded surfaces on existing terrazzo floor with mechanical, hand grinding, grouting with suitable neat cement grit of same colour cement of the original floor, washing the surfaces clean and rubbing hard with slightly mustered felt with axalic acid and polishing floor with felt or hessian base cloth and making the floor bright with polish complete all as specified and as directed.

Excavating in trenches for foundation etc not exc 1.5 m wide and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exeeeding 25 cm thick in soft/loose soil under floor complete all as specified and as directed.

Removing excavated materials n.exc 50m & depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed.

PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in surface channels, drains complete all as specified and as directed.

Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 150 mm dia pipe complete all as specified and as directed.

Salt glazed stone ware drain pipes of 150 mm internal dia, grade"A" laid in trenches and jointed complete all as specified and as directed.

Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for .

Pre cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes including necessary formwork and set in CM 1:4 complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Labour only for cleaning of existing lines of 150mm dia by rodding with split bamboo/cleaning rods so as to cleaning the blockage of line and for free flow of sludge upto the next manhole and making good any damages complete all as specified and as directed.

Labour only for cleaning existing manholes/septic tank by removing silt, debris, sludges and other materials deposited including bailing of water by mechanical pump including making good any damages complete all as specified and as directed.

Labour only for cleaning of covered drains of any size all as specified and directed including necessary removing cover slabs and replacing after cleaning complete all as specified and as directed.

Disposal of excavated silt from drain to outside MOD land and deposited at GVMC approved dumping yard complete all as specified and as directed.

Demolition of brick or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for walling of random rubble, uncoursed,well bonded,bedded and solidly hearted. built in cement mortar 1:6 complete all as specified and as directed..

Brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with integral water proofing compound @ 3% by weight of cement and finished the surfaces even and smooth complete all as specified and as directed.

Cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) as in coping, benching, channnel, etc incl necessary formwork complete all as specified and as directed.

Dismantiling the existing unserviceable gully trap including chamber and material and labour for provilsion of salt grazed stoneware gully trap, square or round mouth type "P" of size 180 x 150mm, inclulding setting and jointing in cement motrar 1:1 plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4 rendering in cement mortar 1:4 all round finished even and fair using extra cement RCC cover slab in RCC type B1, 1:2:4 wiht suitable reinforcement etc., complete all as specified and as directed

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS