Fabrication work in 05 no. of existing rest shelter and internal and external work for provision of power supply arrangement in boom barrier system for proposed 05 no. of entry exist point at Topa, Sarubera and Karma Project under Kuju Area.

Amount

Structural steel work riveted, boited or welded in built up sectiona trusses and framed work, including cutting, hoisting, foxing in position and applying a priming coat of approved steel primer all complete For making of door, window, base, MPLS rack, Battery rack

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade matine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. Including necessary nails screws etc complete as per direction of Engineer-in- charge

Painting wood work with Deluxe Multi Surface Paint of required shade Two or more coat applied @ 0.90 itr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 Itx/ 10 sqm over an under coat of primer applied 0.80 ltr/ 10 sqm of approved brand and manufacture

Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required.300 mm

Supplying, erection and testing of approved make wall mounting fan oscillating type with base, blades, guard, speed regulator etc. AC 230- 250 volts with connections and including raw bolt/anchor hole fastener etc. complete finished and as required 400mm

Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @L 70, system iumen output should be minimum with efficacy>100 Im/Watt. LED driver PF> 0.95, THD <20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 7908/IS16106 (2012), IEC60598, IEC61347/c connection wire, testing etc. to complete the job. 22/24W 22/24Watt, color temp 3000-6500k as required

Rubber mat Supply of rubber mat 2 x 1.0Mtr, 1100V tested

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group(A)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.2 x 6 sq. mm

Earthing with copper earth plate 600 mm X 600 mm X3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/coke and salt) as required.

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

(a) 5/6 A switch

(b) 3 pin 5/6 A socket outlet

( c) 15/16 A switch

(d) 6 pin 15/16 A socket outlet

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 40A

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MOB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4+12), Double door

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.63A

Total impact of GST for the purpose of CTC

M/S. PAWAN KUMAR (BID ID -1104939)