Repairs / Re-novation of Industrial canteen builindg inside factory area at OFMK.

Site clearence

Surface excavation not exceeding 30 cm deep and averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed

Earth work in excavation in all kind of soils (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Surface dressing n exc 15 cm deep in hard / dense soils

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed.

Dismantling floor,heart or wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises. Complete all as specified directed and directed.

Taking down : Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site.

Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqm and repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed.

Reapirs to chowkhats or frames : Taking down Chowkhats or frames each exc. 1.5 sq. m but not exc 4.0 sqm and removing to stores as directed.

Stone Masonry : Walling of Squared Rubble regular coursed Stone masonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed.

PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed.

Precast Cement Concrete solid building blocks of grade B1, 1:2:4 mix or slabs 10cm thick setting in CM (1:4)complete , Complete all as directed and specified

REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. .

Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar. Complete all as specified and directed.

Plastering : Rendering of 10mm thick plastering with 1:4 cement plaster on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed.

GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed.

Rounding to edges of stone slabs / granite one edge, such as in steps, cooking platform, and other similar situations. Complete all as specified and directed.

Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finish glossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC.

FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajariya/ Orient Bell

SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed.

Dismantling of structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed.

UPVC fixed window / Ventilator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,

UPVC window 3 track : Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

UPVC window 2 track : Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

UPVC sliding door :Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.

UPVC casement door : Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge.

steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth 0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed

Sheet glass : Supply and fixing of Sheet glass, ordinary quality 6.3 mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane. Complete all as specified and directed by EIC.

Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in square exc 0.5 sq. m in each pane. Complete all as specified and directed by EIC.

Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in square not exc 0.5 sq. m in each pane. Complete all as specified and directed by EIC.

Snap grid : Supply and fixing of 605x605 mm snap grid Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong

Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk. for fixing in 600 mm x 600mm grid, Make: Gyproc/ La gyp

LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix

S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix

Wooden door frame : Supply and fixing door frames using 1st class hard wood , Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed . Complete all as specified and directed by Engg.in.charge.

Wooden glazed door shutter : Supply and fixing of Glazed and skeleton shutters with 1st class hard wood 30 mm finished thickness, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. Complete all as specified and directed by Engg.in.charge.

Wooden panelled door shutter : Supply and fixing of wooden panelled shutters with 1st class hard wood 30 mm finished thickness, lain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. Complete all as specified and directed by Engg.in.charge.

Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint . Make:TATA, Jindal

Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, JSW, Complete all as specified directed.

Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed.

Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI based corrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed.

Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI based plain roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed.

Roof Gutter: S&F of Plain, galvanised, mild steel sheeting 1.00 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. Complete all as specified and directed.

Cutting or uprooting grass on old CC/brick tiles or on old mud phuska, and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed.

Surface painting : Removal of old tarfelt sheets, Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane' @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying. Complete as specified and directed.

Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coat with lndustrial bitumen 85/25 for waterproofing treatments at the rate of 1.2 kg / sqm .

Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced application by torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm. Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC.

Rendering synthetic enamel painting on new Steel surfaces of any description over 10 cm width or girth - TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger

CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed.

SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade 'A', including laying in proper slopes, including jointing with cement and jute complete all as specified and directed.

CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed.

SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed.

PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like "T", "Y" junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC bend : Supply and Fixing of 110 mm dia PVC (SWR) bend any radius. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC reducers : Supply and Fixing of 110 mm dia PVC (SWR) reducers. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

PVC coupler : Supply and Fixing of 110 mm dia PVC (SWR) coupler. complete all as directed. Make: Sudhakar/ Nandi/ Supreme.

ࠀ噐⁃⁐牴灡㨠匠灵汰⁹湡⁤楆楸杮漠⁦ㄱ‰浭搠慩倠䍖⠠坓⥒倠琠慲⹰挠浯汰瑥⁥污獡搠物捥整⹤䴠歡㩥匠摵慨慫⽲丠湡楤 畓牰浥⹥ " ( Y ] “Ԉ倀䍖†䍗挠湯敮瑣牯㨠匠灵汰⁹湡⁤楆湹桴瑥捩攠慮敭慰湩楴杮漠传摬瀠楡瑮摥匠整汥猠牵慦散⁳ⴠ猠牵慦散⁳景愠祮搠獥牣灩楴湯漠敶⁲〱挠楷瑤⁨牯朠物桴椠据畬楤杮瀠敲慰慲楴湯漠⁦畳晲捡獥†吭佗䌠慯獴‭污獡猠数楣楦摥愠摮搠物捥整ⵤ䴠歡㩥䄠楳湡䄭捰汯瑩⁥ 敂杲牥䰭硵汯⼠䐠汵硵䜭慬獳༮ऀကഀᄀऀ렀ഀ묀ऀఀࠁ久䵁䱅倠䥁呎义⁇›♍⁌‭敒摮牥湩⁧祳瑮敨楴⁣湥浡汥瀠楡瑮湩⁧湯眠潯敤畳晲捡獥ⴠ漠摬猠牵慦散⁳景愠祮搠獥牣灩楴湯漠敶⁲〱挠楷瑤⁨牯朠物桴椠据畬楤杮瀠敲慰慲楴湯漠⁦畳晲捡⁥‭坔⁏䌠慯獴‭污獡猠数楣楦摥愠摮搠物捥整ⵤ†慍敫›獁慩⵮灁潣楬整⼠䈠牥敧⵲界潸 畄畬⵸汇獡⹳    ® ± ˜Ĉ䤀䍗㨠匠灵汰⁹湡⁤楦楸杮漠⁦坉⁃景愠灰潲敶⁤慭敫映硩摥眠瑩⁨⁐牴灡䴠歡㩥䠠湩睤牡⽥倠牡祲慷敲倨楲敭⼩䌠牥⡡汃楡⥲‮潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥̮ऀᔀࠁ
佃䍎䅅䕌⁄䱆单䥈䝎匠卙䕔⁍›畓灰祬愠摮映硩湩⁧景圠污潭湵整⁤潣据慥敬⁤汦獵楨杮猠獹整椨据畬楤杮映慲敭‬潣瑮潲汰瑡⁥湡⁤湩瑳污慬楴湯欠瑩 楷桴搠慵汦獵⁨潭敤漠⁦慣慰楣祴ㄠ‰瑬獲‮慍敫›慊畱牡匨汯⥯ 慐牲睹牡⡥牐浩⥥ 敃慲䘨畯瑮楡⥮‮潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥᤮ऀ餀ࠀ
䥍剒剏㨠䴠物潲⁲‵浭琠歨‮楷桴戠癥汥敬⁤摥敧映硩摥眠瑩⁨潣据慥敬⁤捳敲獷䴠歡㩥匠楡瑮䜠扯楡⽮丠汩慫慭⽬䌠獡⁡潇摬‮潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥ܮऀ＀ࠀ
䅗䱌吠䱉卅㨠匠灵汰⁹…楦楸杮漠⁦潃潬牵摥搠杩瑩污朠慬敺⁤散慲業⁣楴敬⁳湩瘠牥楴慣畳晲捡⁥〳砰〶‰浭猠瑥愠摮樠楯瑮摥椠敮瑡挠浥湥⁴汳牵祲愠摮瀠楯瑮摥椠桷瑩⁥牯挠汯畯敲⁤散敭瑮琠慭捴⁨污獡猠数楣楦摥愠摮搠物捥整⹤䴠歡㩥䨠桯獮湯 態慪慲⽩传楲湥⁴敂汬ਮऀﰀࠅ偕䍖挠獡浥湥⁴楷摮睯㨠唠噐⁃楷摮睯⠠楓杮敬朠慬敺⁤慰敮桳瑵整⁲…楦數⁤楷敲洠獥⁨慰敮⥬›畓灰祬愠摮映硩湩⁧慦瑣牯⁹慭敤甠噐⁃桷瑩⁥潣潬牵䌠獡浥湥⁴楷摮睯猠湩汧⁥慰敮楷桴匠匮‮牦捩楴湯栠湩敧⁳㌨〰砠ㄠ‹⁸⸱‹浭Ⱙ洠摡⁥景⠠浳污敳楲獥਩牦浡⁥㜴砠㔠‰浭☠猠獡⁨㜴砠㘠‸浭戠瑯⁨慨楶杮眊污桴捩湫獥⁳景ㄠ㤮넠〠㈮洠湡⁤楳杮敬朠慬獳瀠湡੥汧穡湩⁧敢摡漠⁦灡牰灯楲瑡⁥楤敭獮潩䄨敲⁡景眊湩潤⁷灵潴〠㜮‵煳⹭ 潣灭楲楳杮漠⁦偵䍖洠汵楴ਭ档浡敢敲⁤牦浡ⱥ猠獡⁨湡⁤畭汬潩眨敨敲攠敶ੲ敲畱物摥 硥牴摵摥瀠潲楦敬⁳畤祬爠楥普牯散⁤楷桴ㄊ㘮‰₱⸰′浭琠楨正朠污慶楮敺⁤業摬猠整汥猠捥楴湯洊摡⁥牦浯爠汯潦浲湩⁧牰捯獥⁳景爠煥極敲⁤敬杮桴⠊桳灡⁥…楳敺愠捣牯楤杮琠偵䍖瀠潲楦敬Ⱙ甠噐੃硥牴摵摥朠慬楺杮戠慥獤漠⁦灡牰灯楲瑡⁥楤敭獮潩Ɱ䔊䑐⁍慧歳瑥‬瑳楡汮獥⁳瑳敥匨⁓〳‴牧摡⥥映楲瑣潩੮楨杮獥‬楺据愠汬祯⠠桷瑩⁥潰摷牥挠慯整⥤挠獡浥湥ੴ慨摮敬ⱳ䜠䤮‮慦瑳湥牥⁳〱‰⁸‸浭猠穩⁥潦⁲楦楸杮昊慲敭琠楦楮桳摥眠污ⱬ瀠慬瑳捩瀠捡敫獲‬汰獡楴⁣慣獰愊摮渠捥獥慳祲猠慴湩敬獳猠整汥猠牣睥⁳瑥⹣䤠据畬楤杮匠⁓楷敲洠獥⁨慰敮楷桴愠畬業楮浵戠敥楤杮映硩摥琠畯整⁲慦散眠湩潤⁷獵湩⁧摡番瑳扡敬⼠敲潭慶汢⁥汣灩⹳倠潲楦敬漠੦牦浡⁥…慳桳猠慨汬戠⁥業牴摥挠瑵愠摮映獵潩敷摬摥愊⁴污潣湲牥ⱳ洠汵楬湯⠠晩爠煥極敲⥤猠慨汬戠⁥污潳昊獵潩敷摬摥椠据畬楤杮搠楲汬湩⁧景栠汯獥映牯映硩湩੧慨摲慷敲猧愠摮搠慲湩条⁥景眠瑡牥攠捴‮晁整⁲楦楸杮昊慲敭琠敨朠灡戠瑥敷湥映慲敭愠摮愠橤捡湥⁴楦楮桳摥眊污桳污敢映汩敬⁤楷桴眠慥桴牥瀠潲景猠汩捩湯猊慥慬瑮漠敶⁲慢正牥爠摯漠⁦敲畱物摥猠穩⁥湡⁤景愊灰潲敶⁤畱污瑩ⱹ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搊物捥整⁤祢䔠杮湩敥⵲湩䌭慨杲⹥  Š § ĘĈ䔀䍗㨠匠灵汰⁹湡⁤楦楸杮漠⁦䤠慴楬湡䌠汯敬瑣潩散慲業⁣汆潯⁲潍湵⁴敗瑳牥潃浭摯ⱥ删浩氠獥ⱳ传敮瀭敩散映牯䈠瑡牨潯獭眠瑩⁨祓桰湯捩瘠牯整⁸汆獵楨杮猠獹整湡⁤潳瑦挠潬楳杮猠慥⁴潣敶⁲湩汣摵湩⁧潣湮捥楴湯瀠灩⹥††††††††††慍敫㨠䠠湩睤牡⁥ 敃慲⼠匠敷瑬獯†景愠灰潲敶⁤潭敤ͬऀ切ࠀ
䅗䡓䈠十义㨠匠灵汰⁹湡⁤楦楸杮漠⁦湕敤⁲潣湵整⁲慗桳戠獡湩爠捥慴杮敬漠⁦灡牰癯摥洠歡⁥污湯⁧楷桴眠獡整挠畯汰湩Ⱨ眠獡整瀠灩⁥湡⁤潣湮捥楴湯瀠灩ⱥ戠慲正瑥⁳瑥⹣䴠歡⁥›敃慲⼠䠠湩睤牡⁥ 睓汥潴⁳景愠灰潲敶⁤潭敤⹬䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ ðĈ唀䥒䅎⁌›畓灰祬愠摮映硩湩⁧景†敓獮牯唠楲慮慰景愠灰潲敶⁤慭敫眠瑩⁨畡潴映畬桳湩⁧祳瑳浥椠据畬楤杮挠湯敮瑣潩楰数‬慷瑳⁥潣灵楬杮愠摮眠獡整瀠灩⁥慍敫›敃慲⼠䠠湩睤牡⁥ 睓汥潴⁳景愠灰潲敶⁤潭敤⹬†潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥ܮऀꨀࠀ
䥐䱌剁䌠䍏⁋›♓⁆景琠扡敬琠灯洠摯汥倠汩慬⁲潣正眠瑩⁨畡潴挠潬楳杮猠獹整景洠歡⁥›慐牲睹牡⽥†楈摮慷敲⼠䌠牥⁡景愠灰潲敶⁤潭敤⹬䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ ”Ĉ䌀乏䕃䱁䑅匠佔⁐佃䭃㨠匠䘦漠⁦偃䌠湯散污摥猠潴⁰潣正漠⁦慭敫㨠倠牡祲慷敲 䠠湩睤牡⁥ 敃慲漠⁦灡牰癯摥洠摯汥‮潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥ጮऀ谀ࠀ
′䅗⁙乁䱇⁅佃䭃㨠匠䘦漠⁦䌠⁐′慷⁹湡汧⁥潣正䴠歡⁥›慐牲睹牡⽥†楈摮慷敲⼠䌠牥⁡景愠灰潲敶⁤潭敤⹬䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ ‡Ĉ䔀䍗䨠呅䘠啁䕃⁔›♓⁆景䔠䍗樠瑥映畡散⁴景洠歡㩥倠牡祲慷敲 䠠湩睤牡⁥ 敃慲漠⁦灡牰癯摥洠摯汥⸮䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ ‰Ĉ䈀䉉䌠䍏⁋›♓⁆景†偃䈠扩挠捯潬杮戠摯⁹景洠歡⁥›慐牲睹牡⽥†楈摮慷敲⼠䌠牥⁡景愠灰潲敶⁤潭敤⹬䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ €Ĉ匀䅏⁐䥄䡓㨠匠䘦漠⁦卓猠慯⁰楤桳漠⁦慭敫㨠倠牡祲慷敲 䠠湩睤牡⁥ 敃慲漠⁦灡牰癯摥洠摯汥‮潃灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥मऀȀࠁ
牕湩污瀠牡楴楴湯㨠匠灵汰⁹湡⁤楦楸杮漠⁦偈⁌䠨杩⵨牐獥畳敲䰠浡湩瑡⥥甠楲慮慰瑲瑩潩獮甠楳杮ㄠ′浭琠楨正挠浯慰瑣戠慯摲漠⁦楷瑤⁨〴‰潴㔠〰洠湡⁤敨杩瑨ㄠ〲‰浭漠⁦灡牰癯摥洠歡⁥湡⁤楦楸杮眠瑩⁨瑳楡汮獥⁳瑳敥牢捡瑫⹳䌠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ a一浡⁥景圠牯㩫†敒慰物⁳ 敒渭癯瑡潩景䤠摮獵牴慩慣瑮敥畢汩湩杤椠獮摩⁥慦瑣牯⁹牡慥愠⁴䙏䭍‮3䌀湯牴捡⁴潎›㜠〳㔲伯䵆⽋䕔ⴠ㔲伯䵆⽋佅䤯⽃〲㔲㈭ਸ਼

S & F of G.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches.

S & F of G.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches.

S & F of G.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed.

Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex

NAHANI TRAPS : Supply & Fixing of CI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4 complete all as specified and directed at site.

GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified.

PVC D/E PIPE CONNECTION : Supply and fixing of PVC Double End Pipe connection. in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store

Taking down fan, sealing cable end, dismantling blades as directed and removing fan and blades and stores.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan. Complete all as specified and directed.

Ceiling fan rod : Supply of Galvanised steel rod 16 mm dia. and 2.5 mtr length including providing holes on both sides for hanging ceiling fans etc. as directd.

S & F of Modular metal flush box 6 module

S & F of Modular white cover plate with frame 6 module

Hard core with broken stone/ boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed.

Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed

Smoth finish : Finishing cement concrete surface even and smooth using extra cement.

RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed.

CC chequered tiles : S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors. Complete all as specified and directed.

Tandur Stone flooring : Supply and laying of Rough dressed lime stone / Polished Tandur stone slab flooring,25 mm thick, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3. Complete all as specified and directed.

Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregate in window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed.

Supply and fixing of Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat.

Complete removal existing treatment of of white washing on surfaces of walls/ concrete.

Tile adhesive : Supply and laying of tile adhesive screed bed of thickness 6 mm thick average by using binding materials according to site conditions. Complete all as specified and directed. Make. BASF Master tile 25, Laticrete as approved by EIC.

Forming V grooves on granite surfaces n,exc 10mm deep and n exc 10mm on face in steps, cooking platform, and other similar situations etc.

Down take pipe : S&F of GI galvalume 0.5 mm thick pre-fabricated down take pipes/ Metal down spout pipe square 120x120 mm size fixed to exsting roof gutter at heights as directed at site.

Pipe clamps : GI clamps for fixing rain water down take pipes square/round of any size fixed to structural columns with nuts & Bolts or self tapping screws as ditected at site.

Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site.

PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed.

PVC door shutter : S & F of Factory Made Solid WPVC Door Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour.

Please Enable Macros to View BoQ information