Supply and Laying and Jointing of pipe line and construction of OHT Pump House providing household connections construction of boundary wall boring of tube well in Daluwala Khurd Block Bahadrabad water supply scheme

Amount

Over Head Tank

Supply of all materials, T&P etc.and construct an RCC over head tank of following size with RCC staircase & 1 m wide balcony, G.I. pipes railing consisting of 3 rows of 20 mm dia. G.I. pipe and angle iron posts around balcony & at the dome periphery, M.S. ladder from balcony to top of tank and inside the tank, supply and fixing M.H. cover with locking device, 1.2m dia ventilator, lightening conductor, water level indicator, supply and fixing of pipes, CI D/F pines, supply and fixing M.S. clamps with RCC column 40 mm PCC 1:2:4 over 80 mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, escape channel of 20 m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of apex paint and testing of tank for water tightness and also including cost of supply and fixing of all necessary pipes and valves etc. all complete with inlet, outlet, overflow and washout pipes with bypass arrangement and necessary fittings and specials and testing of bearing capacity as 10 ton/m2.

50 KL Capacity and 18.00 Mt Staging

Supply carting, laying, Jointing of full length of following dia of GI Class C pipes, including testing of pipe line complete.

50 mm G.I (M)

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve,with C.I. surface box 100x100x75 mm with hinge cover fixedin RCC slab 1:2:4 cement sand and 20mm grit necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 & 12 mm thickness. chambers as per type design including supply of all materials labour t&p etc complete.

Pump House

Construction of Pump House and its all Apprutment work including all material Labour T&P etc complete as per drawing provided by deptt. and as per Direction of Engineer Incharge.

Construction of boundary wall around water works compound for each zone as per type design / Drawing provided by department and as per direction of engineer incharge.

Fixing of 1.2 m wide M.S. gate with wicket gate including fabrication and supply of steel and construction of boundary pillars etc. all complete for each zone as per type design / Drawing provided by department and as per direction of engineer incharge.

Elecrical and mechnical works Works

Transportation of Rig Machine, Air Compressor, O P Unit and camp equipages, connected T&P and necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Errection and leveling of rig machine and barricading at site of work

Dismantling of rig machine and clearance of site after satisfactory completion of work

Drilling of borehole by Dual rotary/ DR/ DC-RC/Percussion Rig machine.

Drilling of 600 mm dia borehole from GL to required depth.

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply and lowering of 175 mm dia MSERW fin cut plain pipe, 5.6 mm thick as per IS code 4270

Supply and lowering of 175 mm dia MSERW fin cut slotted pipe, 5.6 mm thick as per IS code 4270

200 mm dia bail plug

200 mm dia MS tube-well cap

Supply & fixing of 200 mm dia M.S.D.I. housing clamp & girder set

Supply & shrouding of pea gravel in between bore & tube well assembly to the entire depth of tube well.

Development of TW by 300 PSI/900 CFM Air compressor as below including Erection of compressor at site of work. For each Zone.

Running of compressor for development and testing of tube well.

Development of TW by suitable size of OP Unit as below including Erection of OP Unit and camp equipage at site of work.

Lowering of suitable size submersible pump motor set with column pipe and running of D.G. Set, running of OP Unit for development and yield test of tube well. For each Zone.

Geological survey of site

Chemical & bacteriological testing of water sample

Supply of submersible pump capable of delivering 200 Lpm discharge at 55 mt. head with 5.0 HP electric motor to be operated on 415 volt (+\- 10% ), 3 phase,50 C\s AC supply with 5 Mtr. submersible cable.

Supply of spare pumping plant as above .

Supply of spare pumping plant as above .

Supply of 100 amp. 3 phase with neutral main switch with enclouser and HRC fuses.

Supply of submersible cable 1x3x16 sq.mm .

Supply of aluminum armored cable 25 sq.mm 3.5 core .

SUPPLY OF MAIN PIPING AND VALVE OF 65mm/50mm DIA HAVING FOLLOWING ITEM as per requirement .

C class M S column pipe (confirming IS: 4270 or latest IS code) in 3 mt. length with interlocking arrangement (flanged/socketed) .

CI D\F PN-1.6 Sluice Valve with hand wheel .

CI D\F PN-1.6 Reflux Valve .

MS D\F pipe of 1.5 Mt. length- 2 Nos, MS D/F pipe of 1.0 Mt. length-1 No., Ventury - 1 No, Tee-1 No, CI D\F bend-2 Nos, TW Cap-1 No., Packing & nut bolt etc. - 1 Lot.

S/o 150 mm dia M.S.D.I. clamp set .

S/o Jointing material for wiring connection including lugs, thimble, insulation tapes etc.For each Zone

S/o Pressure Gauges with control cock & fitting, nipple, pipe, elbow etc complete- 10Kg/Sq Cm.

Installation & testing of pumping plants and accessories.

Earthing with G.I Earth plate of 600mmx600mmx 6mm size including accessories and providing masonry enclosure with providing and fixing 25mmx5mm GI strip on surface or in recess for connections with charcoal, salt as required.

Supply of 3 ton capacity and 4.5 mt. lift chain pulley block .

Supply of rubber resistance insulated sheet 2M x 1M x 25mm thick.

Supply of three phase rolling contact servo voltage stabilizer 50 KVA capacity with input voltage range 300 to 480 with constant output of 415+/-1% complete in all respect ONAN Type.

Earthing with G.I Earth plate of 600mmx600mmx 6mm size including accessories and providing masonry enclosure with providing and fixing 25mmx5mm GI strip on surface or in recess for connections with charcoal, salt as required.

Installation, Testing & commissioning of Three phase servo voltage stabilizer.

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/sub main along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of metal box of 180 rnmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required. For each Zone

Supply and fixing of following way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/RCCB/Isolator) For each Zone

6 Way double door ,

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of 20 W LED tube light complete in all respect (Bajaj/Philips OR Equivalent make)

Supply in fixing of LED external lighting luminaries with mounting bracket etc. complete.

Kunwar pal