PAINTING TO JETTY FLOOR AND DOCK SEA FACE WALL AT REQUIRED LOCATIONS IN VIEW OF REGULAR VVIP VISITS AT DRY DOCK AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATNAM

Amount

M&L for cleaning of oil spilled flooring surfaces of jetties with soap water and fresh water jet pressurized application to get clean surfaces prior to the application of traffic guard renewal coat on the flooring of jetties complete all as specified and directed.

M&L for application renewal coat of two component wearing coat, Traffic guard wearing coarse of Fosroc make, mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours complete all as specified and directed.

M&L for 20mm thick cementitious flooring system after application of epoxy based bonding agent on the prepared jetty floor with Nitoflor Levelcrete of Fosroc make having a compressive strength of 40Mpa. The pre-pack 20Kg Nitoflor Levelcrete bag shall be mixed with 4Ltr of water as per manufacturers instructions and thouroughly mixed by meachnical means for application on the floor including demoliton of existing flooring complete all as specified and directed.

M&L for application of top wearing coat with the properties of Anti-skid, oil resistant, flexible & UV resistant coating system with the following laying methedology :- a) Application of two component Epoxy primer Notoprime30 of Fosroc make, mixed with mechanical mixer and applied on the level crete surface by using sponge based epoxy roller followed by spinkling of anti-slip grain No 2 of Fosroc make on the primed surface on wet condition for skid resistant and allow it to dry for 16-24 hours. b) Application of two component prepacked proptective system of Trafficguard Intermediate coat of Fosroc make mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours. c) Application of two component wearing coat, Trafficguard Wearing coarse of Fosroc make mixed with mechanical mixer and applied on the anti-skid surface by using sponge based epoxy roller and allow it to dry for 16-24 hours.

M&L for providing two coats of carbonation resistant film chemical "Deck gaurd S" of M/s FOSROC not less than 150 micron( dry film) per coat over treated area/plaster complete including a coat of "Deck gaurd S primer " of 150 microns or equivalent chemicals manufactured by Sika India Pvt Ltd / Choksey Chemicals Pvt. Lt M/S Mapei Const Product India PVT LtdM?S Thermax Ltd/ M/S STP / M/S Dr Sunanada / M/S BASF on dock walls complete all as specified and directed.

M&L for complete removal of existing finishes by sand blasting from the steel surfaces of bollard base & head, duct cover and other similar steel surfaces and applying two coats of coal tar epoxy paint over a coat of epilux zinc chromate yellow primer and the quoted rate includes writing of numbering the same with orange reflactor paint (100mm to 150mm height) on the painted surface of the bollard complete all as specified and directed.

M&L for periodical maintenance of existing (old) stainless steel of post & railing of any size / any description of hand rails / ladders etc with emery paper, tack powder, soft cloths etc for cleaning the stain marks / scaling on the exposed surfaces of SS pipes and buffing with hand machine etc complete all as specified and directed.

RAGHU RAMA PANDA (BID ID -3180730)

SPAAN Infratech (BID ID -3180549)

UNIVERSAL ENTERPRISES (BID ID -3180575)

SRI SIMHADRI COMPANY (BID ID -3181173)

UNITY PROJEKTZ (BID ID -3179509)

K V P RAJU (BID ID -3180455)

aswitha engineering works (BID ID -3180841)

Gv.Raviraju (BID ID -3178866)

venkata sai constructions (BID ID -3181015)