S.R. to Boy s Hostel Buildings For Government Engineering College at Valsad (1 Nos) (Toilet - Bathroom Renovation Main Gate Plumbing Work Sanitary & Outer Drainage Work Water Supply Submersible pump, and Misc. Works)

Name of work :-

S.R. to Boy's Hostel Buildings For Government Engineering College at Valsad (1 Nos) (Toilet - Bathroom

Renovation, Main Gate Plumbing Work, Sanitary & Outer Drainage Work, Water Supply, Submersible pump, and

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 971.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable

materials with all lead and lift.

2 Demolition and disposal of unserviceable materials with all lead and 43.00 Cumt 609.26

lift.(i) Lime concrete.

3 Providing and laying water proofing treatment by conventional method 200.00 Sqmt 897.89

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

4 Dismantling santtary fittings like wash basin . W.C. pan Indian 45.00 Nos. 405.65

and European type, flushing tank etc. including stacking the materials

with all lead and lift.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 1296.00 Rmt. 75.08

fittings and clamps including stacking the materials with all lead and lift (

for any dia, of pipe)

6 Providing and laying Anti Skid Full Body Vitrified tiles 8 to 10 mm thick, 225.15 Sqmt 1073.13

24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement. (Make Varmora, AGL, Jhonson, Kajaria, Somani

7 Providing and laying 24" x 24" Double Charge Vitrified tiles 8 to 10 mm 752.78 Sqmt 1141.45

thick, in skrting risers of steps and dedo on 10mm thick cement plaster

1:3 (1-cement : 3-coarse sand) andjointed with white cement slurry.(

Brand Like AGL, Jhonsan, Varmora as directed by engineer in charge etc

8 Providing laying and jointing in true line and level 15mm dia. 270.00 Rmt. 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

9 Providing laying and jointing in true line and level 25mm dia. 270.00 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

10 Providing, laying and jointing in true line and level 110 diametre 600.00 Rmt. 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

11 Providing and fixing PVC SWR Nahni trap with SS or PVC jali IS 14735 for 65.00 Nos 571.08

drain - 100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

12 Providing laying and jointing in true line and level 40mm dia. 235.00 Rmt. 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as directed including

13 necessary fittings

Providing and etc.

fixing including

screw downtesting ofof

bib taps pipe and joints

following size.and

Brass the 26.00 Nos. 2508.84

chromium plated screws down Bib Tap. (i) 15mm dia. (Make Jaguar EKO

Series EKO-CHR-33037 Short Body Bib Tap as Directed by engineer

incharge and completed), SS soap (15Cm) dish, SS towel holder (450mm

14 Providing and fixing wash down water closet dual flushing system 10.00 Nos 10219.18

type (Wall Hung type W C pan) with integral P and S trap including

jointing the trap with soil pipe in cement mortar 1:1 (1 cement five sand)

including providing and fixing seat cover for wash down WC with

40mm dia CP brass flush cock, Brass chormium plated screws down bib

tap (EKO-CHR-33037) and GI inlet connection etc .(Make Jaquar, Rak,

Cera and equvivelent.)

15 Provision and fixing water closet squatting orissa type W.C. pan size 5.00 Nos 6922.54

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm

dia CP brass flush valve, Brass chormium plated screws down bib tap

(EKO-CHR-33037) and GI inlet connection etc. comp. (A) Vitreous china

long pattern white Colour.

16 Providing and fixing wash basin with single hole for pillar tap with 15 Nos 6493.29

C.I. Or M.S. brackers painted white including cutting holes and making

good the same including Brass waste, angle cock, bottle trap and wall

mounted tap (Model: Jaquar Spout Operated Bib Tap with Wall Flange

SOT-83037 ) :(ii) Flat back wash basin 500mm x 400mm size including all

necessary fittings. ( Make for Wash basin Cera, Jaquar, hindware, Plantex,

Jonshons etc directed by engineer in charge and completed.)

17 Providing and fixing Urinal or approved quality including conecting the 15 Nos 3252.20

Urinal with waste pipe and Stop tap (Code: ECS-WHT-253, Jaquar) etc.

complete.(A) White earthenware flat back or corner type size 430mm x

260mm x 350mm. ( Make for Wash basin Cera, Jaquar, hindware, Plantex,

Jonshons etc directed by engineer in charge and completed.)

18 Providing and fixing polished 18 mm thick black granite with full round 23 Sqmt 2252.30

edge and double side polished of approved quality in between urinal and

fixing with cement slurry & adhesive including moulding of both exposed

edges as directed by engineering in charge etc. complete.

19 Providing and Fixing 0.60m wide sandwich type washbasin platform 5 No 16897.30

including supplying and fixing granite stone of black or equivalent quality

18mm thick mirror polished on top and side position and vertical strip at

front with cement slurry & adhesive including moulding of both exposed

edges over 25mm thick kota stone platform fixing in top and sides and

intermediate supports fixing with cement mortar and adhesive and

finishing all material and labour with necessary fitting complete etc.

20 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 15 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

21 Painting two coats (excluding priming coat) on new wood and wood 168 Sqmt 88.29

based surface with enamel paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter sand

papering and stopping.

22 Providing and Fixing WPC Door including fixture and fastening with 67 Sqmt 4307.65

new 304 grade fixtures like 3 Hinges, 1 Stoppers 20cm, 1 Aldrop 25cm,

Handle 10cm, 1 Tadi 20cm etc. and as directed by engineer in charge etc

comp. (LAPO/ Niki or Equivelant brand WPC Doors for Bathroom Door,

Waterproof & Termiteproof, WPC Door for Entrance,Office,

Balcony,Kitchen without Frame. 30 mm Thickness,Density-600,22 kg-

Wooden Warm–60)

23 Providing 15mm thick cement plaster in single coat on Rough 362 Sqmt 171.80

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

24 Providing and Applying two coats of putty & two coats of primer of 548 Sqmt 40.59

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

25 Wall painting (two coats) with plastic emulsion paint of approved brand 548 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

26 Painting one coats (excluding priming coat) on previously painted steel 1250 Sqmt 55.05

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

27 Removing and scraping of old deteriorated plaster of any thickness 1152 Sq.mt 19.57

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable

from site of work with all lead and lift (Outer Plaster)

28 20 mm Thick sand faced Gutka cement plaster on walls for all height 1152 Sq.mt 300.66

above ground level consisting of 12 mm Thick backing coat of c.m. 1:3

(1 cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :

1 sand) with 1x1cm Groves at juction of structure member etc.

complete.all height

29 Cutting out cracks of wall and roof terrace to V- section , 418 Rmt 65.23

cleaning out, wetting , grouting with cement and sand slurry 1:3 (1-

cement 3-sand )

30 Wall Painting (Two coats) with weather proof acraylic emulsion 1917 Sq.mt 114.53

(Apex or equivalent type) paint of approved brand and manufacture

and of required shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly resistance primer of

approved brand after thoroughly brushing surface to remove all

dust and remains of loose powdered material etc. copm.

31 Painting one coats (excluding priming coat) on previously painted steel 1260 Sq.mt 55.05

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

32 Removing, Repairing and Refixing Old existing wooden door shutter 57 No 1360.47

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures

like 3 Hinges, 1 Stoppers 20cm, 1 Aldrop 25cm, 2 Handle 10cm, 1 Tadi

20cm etc. and as directed by engineer in charge etc

33 Removing, Repairing and Refixing existing Alluminium window frame 24 No 464.60

with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the window,

all materials, transport cost, taxes etc.and as

directed by engineer in charge etc complete.

34 Removing, Repairing and Refixing existing Alluminium fix ventilation 12 No 289.87

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and as

directed by engineer in charge etc complete.

35 Providing and fixing of Ridge flashing for roof panel shall be made 96 Rmt 858.67

out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet and polyester top

coat 15-18 micron. The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by pop

rivet or self drilling/self stitching fastners @ maximum 450 mm.

Expansion Joint Repairs including Mortar Filling, Damp Proof Coat, Fitting

GI Sheet with Epoxy Filling as per directed by incharge in Engineer.

Rupees Thirty Nine Lakh Twenty Six Thousand Two Hundred Twelve Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated

rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 3926212.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed

specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all

condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution

T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction

works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of

Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement

Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage &

water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document

of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division